I am using many events structures in my applicatio​n,but i am getting caught in my problems ,can any body tell me abt events programmin​g on time out

i have extensive gui application ,i am using events ,but i am caught,i want to konw abt events ,there pros and cons,time out ,how to program in time out

It is unclear as to exactly what you are asking. The event structure is very handy for monitoring front panel activity and performing tasks accordingly. The default event in the event structure is the timeout. In order to set the timeout you just wire the amount of time before timeout (in ms) to the timeout terminal of the structure. You may have tasks that you want to perform at timeout or you may just have an empty case. I strongly suggest using a timeout and putting the case structure in a while loop in order to keep monitoring the events until the loop exit condition has been met.

Similar Messages

  • Can any body tell the seqence in the following events.

    can any body tell the seqence in the following events.
    at selection screen
    at selection screen  on field
    at selection  screen output

    Hi ,
    The sequence of the events and the explanation is follows:
    1)At selection-screen output : It is triggered when the selection screen is loaded in memory before being displayed.
    2)At selection-screen on field:It is tiggered when the user key in the field.
    3)At selection-screen : It is triggered before leaving the selection screen. 
    Reward if helpful.
    cheers.
    syed

  • Microsoft dynamics ax  used on a MAC operating system?  Can any body tell me?

    Dear ALL
    Can Microsoft Ax Dynamics client be installed and used on a MAC operating system?
    Can any body tell me?

    You might want to try using the contact us link on the Microsoft Dynamic Ax site. http://www.microsoft.com/en-us/dynamics/erp-explore-ax-capabilities.aspx
    They will likely know the answer to your question.

  • Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

    hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that?  thans in advance

    There are multiple ways of doing this. Here are some of them..
    The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
    The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
    regards,
    Gautham

  • Can any body tell me how many records can a db hold in a minute

    can any body tell me how many records can a db hold in a minute

    user644700 wrote:
    can any body tell me how many records can a db hold in a minuteI would hope not since it will depend on X number of factors where X is a very large number.
    Did you have anything specific in mind (version, hardware, etc...)? I assume you mean load and not hold?

  • Can any body tell me how to use the TCODE:ABF1 ?

    Can any body tell me how to use the TCODE:ABF1 ?
    Can any body tell me the different of the ABF1 and FB01?
    Thank very much.

    Hi Jie,
    both Transaction codes are working are same.
    Both are working through program : SAPMF05A.
    Packages are different: FIDC & AB.
    FB01 : we can control objects through F_BKPF_BUK
    Hope its clear.
    Kishore K

  • Can any body tell me about event container in workflows

    hi Experts,
                      could you please tell me some details about event container concept. is there a way to see event container in SWO1 transaction. how can we create event container when we create new events.

    Hi Praveen,
    Event container is the container which stores the values of the BO attaribures which get assigned to that instance of the BO.
    If you go to SWO1 transaction and check the BO for which the event is triggered, you would see all the possible attributes than can be assigned.
    To pass the values of the BO event container to the workflow, you need to maintain the necessary binding between the BO event container and the workflow container. This can be done in the 'Basic Data', Start Events tab. If you click on automatic binding, the system would prompt for a default binding. You could opt to use that or create your own binding. Make sure that the datatypes match.
    After mapping the event container to workflow container, you can check in the workflow log for the values passed to the workflow container. If you like to directly check the values stored in the event container, go to SWO1 and simulate an instance of the BO. You can then check the values there.
    Hope this helps!
    Regards,
    Saumya

  • After my last Iphone update many of my songs in my library play and 10 to 20 seconds before the song ends skip to the next song.  Whether I play it on my computer or on my Iphone this occurs. Can any body tell me how to fix this???

    Since my last Itunes update my library of songs has many songs that stop short of the finish and skip to the next selection.  It is that way on my computer and also on my Iphone where I normally play the songs.  Same repeatable stop with the particular song that is affected.  How do I fix????

    Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

  • Can any body tell me when to use what Bean?

    Hi ,
    I am naive to EJB . I want to know when to use which bean . Pls quote with an example.
    Thanks in advance .
    Mahesh L.

    I would highly recommend picking up a book on EJBs
    Professional EJB - Wrox
    Enterprise JavaBeans - O'Reilly
    Mastering Enterprise JavaBeans - Sams
    These are all excellents books and will explain in great detail with sample code how to program EJBs

  • Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

    can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • Can any body advise me what anti virus i can use?

    ey, good afternoon all. i got a message when i'm trying to download something that i need to install an anti virus so that my downloading will not get slow and also my internet connection. the message advice me to download avira. can any body who is expert here tell me of what anti virus i can download into my mac os x mavericks 10.9.5?
    thank you

    Sophos WILL slow your Mac down.
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
    https://discussions.apple.com/docs/DOC-2435
    More useful information can also be found here:
    http://www.thesafemac.com/mmg/

  • On my macbook pro when opening a page i can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success

    on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?

    Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
    Clinton

  • I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

    I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

    Hi Abdul,
    Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
    http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
    Regards,
    Franz

  • I'm wanting to use the "Actions" in Photoshop Elements 11.  But when I get the Actions box up, it is only showing a small list of effects to use.  And no side bar to go any further.  When I click on the little arrow at top and then click on "load actions"

    I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further.  When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search".  The folder at the top does say "Actions".  How do I get more effects?  The tutorials that I've checked into all show a long list of effects in their box.  Can anyone help? 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • Can any body help me in creating a jar using Weblogic server tool

    I have created the class files of the container manged bean successfully.I want to create the jar file using the weblogic tool.
    I have created a new jar file and now I have to add a bean class file and a home class file to it.In the tool I choose a the path using the choose button.When I say next it complaints that it cannot locate the bean files.
    Can any body please help me soon..
    waiting for your reply.

    I had similar problems with the WLS deploy tool. I think they were solved by making sure that I started the tool from the directory that contained the root package of my EJBs.
    It might work...

Maybe you are looking for