I am using Outlook 2010 and have a iphone 4s.  In Outlook I have issues with my contacts not being the same as what I have corrected them to be.  Is there a way to check and see which file Outlook is sharing with I-cloud?

I am using Outlook 2010 and I also use a Iphone 4s. I use Outlook to correct all my contacts and them it sync with my phone BUT I get different variations of the contacts.  Almost as if there is another file it is going to.  Can I check to see which file it is reading from??

This may be helpful.
http://itconflict.com/2012/01/08/troubleshooting-icloud-sync-with-outlook/

Similar Messages

  • How does one do updates when your service provider is s-l-o-w??                     According to the counter, our computer needs almost 20 hrs. of updates, is there a way to pick and choose which ones are downloaded?

    We have a "Rocket Hub" and our download times vary greatly.  My husband's computer, Snow Leopard OS, shows he has about 20 hrs. of updates to download.  Is there a way to pick and choose so we can catch up?

    Nope, because files sizes, machines, software installed are different and you can't control what needs to be installed first before others work.
    Apple is all Internet, you should see Lion users, they can't reinstall their OS at all without a Internet connection. (or pay $69 for the Lion USB key) and then there still the updates to deal with.
    So take a ride, to a Apple Store early in the morning before their network gets overloaded (what a way to get you in the door and buy more junk uh?) fully update to 10.6.8.
    Good thing about Snow Leopard, not much more in large updates coming for that verision, in fact they will stop completely come next spring or so when 10.8 is released.
    Unless you live in a wealthy area with broadband, your a nobody in Apple's viewpoint.
    You could get a 3G laptop connect card, hopefully that will give you enough to download your updates but they cost a fortune.
    If I could just provide you with update disk I would, but I can't, machines are different.
    Call Apple and ask for a update disk, perhaps they have a solution
    Once you do get all your updates, Carbon Copy Clone your boot drive to a external drive, it's hold the option key bootable duplicate.
    Donationware too.
    http://www.bombich.com/index.html

  • I have an iPhone 4S. I noticed that some of my contacts disappear from the phone. Has anyone had this problem? Thank you.

    I have an iPhone 4S. I noticed that some of my contacts disappear from the phone. Has anyone had this problem? Thank you

    I went into the cloud on phone it was on. Turned off and back on. Now i have 6 of one contactDeleted face books also incase that was the issue.  I went to Itunes and couldnt find contacts - now I wonder it is is my outlook email too adding information as I am seeing contacts that are only on my outlook emails.

  • Is there a way to manage (arrange and add/delete) apps from within itunes while I have my iphone 4S connected to computer... instead of doing it on the phone itself? I have an unreasonable number of apps and need to clean it all up.

    I have a replacement phone and have saved a backup but ideally before or, if need be, directly after I restore from backup I would love to clean up my apps.  I have over 2000 apps which I clearly don't use all at once so like to keep most of them sitting in itunes however recently life got messy and so did my phone so much so that I just lost control of what was on it and not on it because of a forgotten wifi synch that I'd not disabled so randomly id get apps appearing on my phone that I'd deleted ages and ages ago.  Anyway the notion of having to fix it all on the phone with the jiggling icons is a painful one... I am hoping I can do it via my lap top instead.  Anyone? all search efforts have not arrived me at the info I seek.

    Yes, connect your iPhone to your computer, click onthe name of your iPhone then click on the apps tab in iTunes.

  • Is there a way to check whether an Excel file has a header or not?

    Hi!
    I'm currently using POI Utility to read and write Excel files.
    You normally use the HasHeaderRow = true / false to specify whether the file has a header or not.
    Now, let's say I have a program that needs to read Excel files from a directory, some have headers, some don't.
    Is there a way to know dynamically whether a header has been defined or not?
    Then, for those having headers, the flag will be set as true, while for those which don't have any header, the flag will be set as false.
    E.g.
    <!--- Create an instance of the POIUtility.cfc. --->
        <cfset objPOI = CreateObject(
            "component",
            "POIUtility"
            ).Init()
            />
    <!--- Set directory --->
    <cfset currentDirectory = GetDirectoryFromPath(GetTemplatePath()) & "newDir">
    <!--- Check whether the directory exists. --->
    <cfif DirectoryExists(variables.currentDirectory)>
         <!--- Read files from the specified directory --->
         <cfdirectory action="list" directory="#variables.currentDirectory#" type="file" filter="*.xls" name="qDirectory">
         <!--- Check if the directory has any Excel file --->
         <cfif variables.qDirectory.recordcount gt 0>
              <!--- Loop query --->
         <cfloop query="variables.qDirectory">
                   <!--- Check if header is present in each of the file --->
                        IF headerExists THEN
                             headerFlag = true
                        ELSE
                             headerFlag = false
                        END IF
                   <!--- Read Excel File --->
                <cfset objSheet = objPOI.ReadExcel(FilePath = #variables.qDirectory.name#, HasHeaderRow = #variables.headerFlag#, SheetIndex = 0) />
              </cfloop>
         </cfif>
    </cfif>
    Any help would be most welcome.
    Thanks and regards,
    Yogesh Mahadnac  

    Hi cfSearching,
    Many thanks for your reply! I really do appreciate!
    However, I've still got 1 more question for you.
    At the moment, I'm using POI and sometimes cfx_Excel2Query to read Excel files.
    In both cases, you have to specify whether the first row is a header.
    How would you read the Excel file to check whether the 1st row is the header?
    I've tried using cffile, but I get all sorts of "garbage"
            <cffile action="read" file="#variables.filename#" variable="xlsResult">
            <cfloop index="i" list="#variables.xlsResult#" delimiters="#chr(13)#&#chr(10)#">
                <cfif variables.i eq 1>
                    <cfoutput>
                        Test 1st Row: #trim(replacenocase(listgetat(variables.i,1,","),'"',"","All"))#
                    </cfoutput>
                </cfif>
            </cfloop>
    I get the following output:
    ÐÏ à¡± á����.... etc etc
    I'd be very much grateful if you could please advise on the latter at your earliest convenience.
    Thanks and best regards,
    Yogesh Mahadnac

  • Is there a way to check to see if an IMEI has been submitted for unlock?

    I wanted to ask is there is any way to check IMEI numbers to see whether or not they have been submitted to Apple for an unlock??
    I have two phones I need to check, and iPhone 4 which is my daughters and was a birthday present, and an iPhone 5 which is mine. Both are NOT blacklisted, barred, reported lost or stolen, both are legitimate phones.
    The iPhone 4 was paid for in full 3 weeks ago, and is locked to VODAFONE UK. The company told me 1-3 days, three weeks later, nothing, and all I get from them now is "we will email you when its been done"
    The iPhone 5 is locked to Orange/EE UK, this again was done three weeks ago, but directly through ORANGE, who tell me the unlock request has been submitted, and it is imminent but then they have me a "HOW TO" of how to unlock it, and told me this has to be done this way or it wont work??
    Here is what they told me I had to do they sent this via email
    Please find the process for unlocking your Apple handset:- 
    Before attempting the procedure, please take a moment to read the following information. Please make sure that your iphone is up to date the latest software version. This can be checked by connecting your device to iTunes via a PC/Mac/Laptop.
    Please be aware that if you have used an unauthorised unlock on your Apple device then Orange cannot be held responsible for any errors that may occur, as this procedure will not only be unsuccessful, it may damage the device. If you have modified the software please update with the latest Apple approved version.
    Apple devices differ from all other manufacturers in that there is no code required to enter into your device to unlock it. However Orange have requested on your behalf to Apple that your device be prepared for unlock and the procedure below advises how you can complete this process. Only handset’s that have been requested to be unlocked viaOrange or other networks can be unlocked this way and the below instruction will not work another Apple devices.
    Apple Unlock Procedure
    1)Insert a non-T-mobile 3G SIM card. This must be a network provider who also supplies the iphone/ipad.
    2)Switch ON the handset.
    3)Connect to iTunes using USB cable
    4)Use the “restore” option within iTunes (located at the bottom of iTunes not the top)
    5)The handset may then display: USB cable and iTunes icon.
    6)Disconnect from USB then re-connect
    7)Synchronise device with iTunes
    8)Once synchronised a message will appear on iTunes stating “Congratulations, your iPhone has been unlocked” If using IOS5 this message will not show
    9)Follow on screen set up instructions to enable new carrier settings
    Your handset should now be successfully unlocked
    Should this not show, please keep other network 3G sim in the iphone and restore the iphone via iTunes making sure all data is backed up first.
    You can also get some self help tips, please put the following into Google and search; support.apple.com/kb/TS3198
    Regards
    If anyone has any idea, please let me know, its driving me mad lol, two iphones, both not working

    Unfortunately, many carriers "drag their feet" when it comes to processing iPhone unlock requests. All Apple does is add the phone's IMEI number to the officially unlocked database, and Apple does this immediately. The breakdown is with your carrier.
    You can call AppleCare, they'll be able to tell you whether the IMEI number is in the database or not.

  • I have a lot of tabs saved so they open when I open Firefox, but the first tab always changes into my homepage, Google. Is there any way to stop this?

    I have 20+ tabs always open on Firefox and it's set to remember them. However, when I open Firefox the first tab changes from what I had open there into my homepage, Google. I can use the "go backward" thing to get to the page I had there, but since it goes back to Google every time I restart the browser that gets tedious.
    The only way to solve this that I've found is to just stop trying to use the first tab and let it be Google. However, I'd like some actual solution that stops this from happening if possible.

    Thanks for the reply, it seems to have solved my issue.
    My tabs are normal and unpinned, I just have Firefox set to open all my current tabs. Safe Mode didn't seem to have this issue, so I disabled Classic Theme Restorer. Several restarts didn't have problems, so I enabled it again and now this isn't happening anymore. Hopefully it stays gone for good and didn't just stop momentarily.
    Edit. So as soon as I posted this, it started happening again. More testing definitely points to Classic Theme Restorer as the cause, so I'll have to investigate solutions on that end.

  • Null and empty string not being the same in object?

    Hello,
    I know that null and empty string are interpreted the same in oracle.
    However I discovered the strange behaviour concerning user defined objects:
    create or replace
    TYPE object AS OBJECT (
    value VARCHAR2(2000)
    declare
    xml xmltype;
    obj object;
    begin
    obj := object('abcd');
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    obj.value := '';
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    obj.value := null;
    xml := xmltype(obj);
    dbms_output.put_line(xml.getStringVal());
    end;
    When creating xml from object, all not-null fields are transformed into xml tag.
    I supposed that obj.value being either '' or null will lead to the same result.
    However this is output from Oracle 9i:
    <OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
    <OBJECT_ID><VALUE></VALUE></OBJECT_ID>
    <OBJECT_ID/>
    Oracle 10g behaves as expected:
    <OBJECT><VALUE>abcd</VALUE></OBJECT>
    <OBJECT/>
    <OBJECT/>
    However Oracle 9i behaviour leads me to the conclusion that oracle
    must somehow distinguish between empty string and null in user defined objects...
    Can someone clarify this behaviour?
    Thus is it possible to test if object's field is empty or null?

    However Oracle 9i behaviour leads me to the conclusion that oracle
    must somehow distinguish between empty string and null in user defined objects...
    Can someone clarify this behaviour?
    Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
    I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs.

  • I want to download specific music to my IPad so i can access it offline.  Sync with iOS 8is not putting the music or playlists I have chosen on my computer onto my iPad.

    I want to download specific music to my IPad so I can access it off line.  I have iOS 8 on my Mac mini and my pad.  The artists, albums and playlists I have selected to sync on my Mac mini do not show up on my iPad.  I am involved in international volunteer work and have periods where I don't have Internet access.

    Hello there, Wldsurfinslovakia.
    The following Knowledge Base article offers up the steps on how to sync music, including playlists to your iOS device:
    Managing content manually on iPhone, iPad, and iPod
    https://support.apple.com/kb/ht1535
    Configure iPhone, iPad, or iPod for manual management
    To manually manage the content, follow these instructions:
    Connect the device to your computer.
    Open iTunes.
    Select your iPhone, iPad, or iPod. If your device isn't visible in the upper right corner of the screen, choose Library.
    Click the Summary tab and select "Manually manage music and videos."
    Click Apply.
    Even when you enable manual management, you can still sync some content automatically. Select the iTunes U, Podcasts, Photos, or Info tab to enable automatic syncing for that content. 
    Manually add or remove content on your iPhone, iPad, or iPod
    After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
    Select your device.
    Click "On this Device."
    Then choose "Add to" in the upper right corner.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Is there a way for multiple users to connect to my home sharing with their iOS device to select music to stream to my A/V receiver jukebox style?

    I have an A/V receiver that I can connect to and select music to stream over my network but I want to know if I have a party if it's possible for multiple users to have access on their own devices to my home shared music and select music to play like a jukebox.

    I almost forgot that using folders can allow each folder to contain a song. I also recall touch tracks or one key play...

  • Is there a way to check if I have either deleted a necessary file or...

    Firstly, let me apologize for this rather long post. I just want to make sure I give as much detail in order to get the problem really solved...
    I have a MacBook Pro 2GHz Intel Core Duo with 512 MB of ram. I am running OS 10.4.10 and don't have the means to either upgrade the OS, increase ram or even backup and reinstall (I am in a remote part of the South Pac. Islands, working as a relief worker, without much more than a dish to connect to the net).
    Now while I know that QuickTime has nothing to do with WMA files and that Flip4mac is the solution of record, allow me to pose my problem (because I can't get a straight answer on other forums whose only suggestion is to reinstall their software).
    I have been using Flip4Mac QuickTime components successfully (to save radio streams) for over a year without a single problem with various versions of Quicktime. Presently, i use QuickTime version 7.6.0 and all was working fine until a few weeks ago. QuickTime works fine in every other way with the exception of playing my saved streams that contain WMA audio.
    I believe I might have created the problem by either... ignorantly deleting files with a tool that allows me to examine the hard drive (including system files) in order to delete large ""unnecessary"" files... or even possibly, it occurred when questionable-content was auto-opened via QuickTime (which incidentally had caused the system to crash requiring a hard keyboard shutdown and restart). The problem occurred soon thereafter.
    i have un-installed and re-installed QuickTime, Flip4Mac and even Windows Media Player for Mac several times with no change. i also ran several virus / disk scans (VirusBarrier, ClamXAV, MacScan, as well as TechTool, Mac HelpMate and MainMenu) also with no change.
    The dialog box that pops up when I attempt to open ANY past saved QuickTime files basically says, QuickTime Player is 'missing a component.' This window doesn't always popup. Also the player will advance the minutes and seconds without playing a sound. Further any app that relies on WMA files also crashes, quits or just doesn't work. Such as WMA to MP3 converters. I even have problems with sounds / music from a couple of MacGames that I own (Luxor & Hidden Relics) as these games may rely on WMA to function (this may or may not be related).
    My question is... is there a way to check if I have deleted a necessary codec, system file, pref. file, receipt, etc. that is crucial to using WMA?
    Or even is there a way to check if some erroneous file has been added to my system (such as a DRM plugin) that is preventing the playing of my saved streams?
    Once again, as I mentioned above, I am unable to backup and reinstall OSX and am at the end of my rope. The only thing that is left for me to say is.... Heeeellllppp!
    Message was edited by: C. Angel

    Tap on the URL to get to edit mode.
    Then slide your finger over the URL to the right until you see the http or https part.
    Or copy the URL and paste it into free Notes page.
    For https URLs there is a padlock in the status bar above the URL.
    If you believe that this sounds complicated, then I agree.
    Perhaps someone will chime in with an easier solution...

  • Is there a way to check FF as BOTH webroot security and now my bank sent a security notification that my Firefox is not secure and may be redirecting elsewhere.

    "ACTIVE PROCESS HAS A POSSIBLE MEMORY LEAK firefox.exe"
    When I run a system analyzer for WEBROOT the results state that there is a security breach for my Firefox browser.
    When I went to access my bank info I receive a message that Firefox is redirecting to a site with a bad certificate.
    Is there a way to CHECK to see if I have a secure copy of Firefox? (Yes, I did install through the main site.
    I TEACH technology for the public school system and have top security which updates regularly and my pc itself runs regular maintenance as well.

    Are there any unknown addons, and do a malware check with some different programs, unless Webroot is bashing firefox over a memory leak it had 2 years ago.
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]

  • Is there a way to check if my music(s) can actually play?

    Hello everyone. I'm planning to buy an iPod Shuffle.
    This question will decide if I'll buy the iPod Shuffle or wait for iPod nano.
    My firend who own the iPod shuffle said there's a case when certain .mp3, which is a supported file type, just won't play due to many possible reasons.(like encoder, etc.)
    I know that the problem can be solved by letting iTunes convert the files into its preferred format, then that converted files should be able to play on the iPod shuffle.
    I have no problem with that case if I'm ripping musics from a CD AUDIO. But if the file I want is already a compressed format like MP3, I wouldn't want to lower its quality even further by converting it to AAC or any other compressed format.
    When there are hundreds of music files onto the iPod shuffle, and if 2 or 3 of them will never play, you never know since there's no LCD or browsing features. To check hundreds music file by playing them one-by-one in order is a pain.
    But let me state this I do like the iPod Shuffle more than iPod nano. If there's a way to check if EVERY music files in my iPod are playable, I'll choose iPod Shuffle over iPod nano.
    To sum up the question : Is there a way to check if every music files in the iPod shuffle can actually play?
    Thank you very much. ^_^

    The shuffle will load from a specified play list in the order of that play list if you set it not to choose randomly.
    You do not have to play the songs all the way through to test them. If a song starts you can skip to the next one and test it.
    You have to test the songs on the shuffle becuse usually the songs will play in iTunes and on other iPods. The only shortcuts I have found are:
    1. If one song from an album will not play then all will not play (this is music store purchases) Thus you can test one song instead of an entire album.Ooops CD - i think I just dated myself.
    2. I have only had problems with songs from the Music Store. YMMV A very small number of songs.

  • Hi! I have 2 pc. Can I use my creative cloud on both, but not at the same time?

    I want to use my creative cloud account on my both computers. I have one laptop and one desktop.
    Is it possible to do that? Of coure not on the same time.
    Viveka in Sweden!

    Yes.
    Mylenium

  • HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

    Hi I've been using apple products for sometime now , I have one iPad , &amp; 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

    If you have registered all your Apple products, you can see them at:
    https://supportprofile.apple.com

Maybe you are looking for

  • My feedback thread

    I started working on my personal portfolio website today with Reflow, so this thread is dedicated to everything that I find unintuitive in Reflow or feature requests I would like to see implemented. Font Aliasing is really bad. I miss a zoom tool! Sh

  • Illustrator color picker position on dual monitor mac

    o/ Is there a way to control where the color picker appears in illustrator cs5.5 on mac os lion 10.7.3? I have a mac pro with a monitor and a cintiq, the monitor is the "active" monitor, it has to be for my use, and the cintiq is the secondary monito

  • DVD-Rs not reading on Sony DW-Q28A

    Hi eveyone, I've got a Dual 2Ghz G5 running 10.4.8 with a Sony DW-Q28a Superdrive that is refusing to mount a couple of Verbatim DVD-R 8x data discs from our photo archive. The discs will spin for a bit, then be regarded by OS X as blank discs. Howev

  • Problem with IOUSBFamily-327.4.0 loging Driver

    Hi I instaled the IOUSBFamily-327.4.0 loging Driver from the Developer side on my  10.5.8 mbpro  (version W8844RE61AQ late 2008 )(this were the newest Drivers i could find on the site). This driver downgraded some of my Kernel extentions for USB < co

  • Disable Cell Broadcast Alerts on Lenovo S90A

    hi, I have purchased Lenovo S90-A  i am getting cell broadcast alerts every 20 mins.. i.e 30-50 alerts/day it is working on andriod 4.4.4 pls help me in disableing that option Regards, Shashank Solved! Go to Solution.