I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device? When will iTunes come to Ubuntu

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
When will iTunes come to Ubuntu?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Similar Messages

WL Cluster: install of weblogic is not working properly

Cluster install of weblogic is not working properly. We are getting kicked out every now and then
from the portal when both PIA1 and PIA2 nodes are up. When we shut down one meaning switch off clustering
then we are fine(Portal becomes very stable).
env setup:
Weblogic 9.2 with MP1-p5 and all the patches on Oracle Enterprise Linux 4 32 bit
PTools version - 8.49.08
Here is the message at the Kernel level if that any help:
Oct 7 10:43:22 hrrecweb01 kernel: Badness in local_bh_enable at kernel/softirq. c:141
Oct 7 10:43:23 hrrecweb01 kernel: [<c0121178>] local_bh_enable+0x3f/0x62
Oct 7 10:43:23 hrrecweb01 kernel: [<c02177b9>] skb_checksum+0x133/0x25e
Oct 7 10:43:23 hrrecweb01 kernel: [<c0250f36>] udp_poll+0x66/0x113
Oct 7 10:43:23 hrrecweb01 kernel: [<c02135e1>] sock_poll+0x19/0x1d
Oct 7 10:43:23 hrrecweb01 kernel: [<c016d777>] do_pollfd+0x42/0x7d
HRRECWEB01 is WebServer name
any thoughts? Is there a kernel variable or settings for linux that I need to set for
cluster weblogic install?
Thanks/Thaya

Kunal,
Have you tried clearing the browser cache?
-Arun

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

Lync 2013 - Silent install via .msp does not work

The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?

Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

My Original Apple ID which I'm using since I bought my IPhone is not working for activation, what should I do?

I have unlocked iPhone 4S which I bought in Jan 2011 from store in Saudi Arabia... Since I bought my iPhone and it is linked to my Apple ID... Lately I moved from my Country Egypt to Slovakia so I didn't take my Egyptian Vodafone SIM Card with me as I will buy a Slovakian one...
Days ago before buying a new SIM Card, iTunes found new update IOS 7.0.4 and after installing the update my iPhone restarted and started to take me through activation... The activation needed a SIM Card so I bought Telefonica O2 SIM Card and I tried to continue the activation... At the step of writing my Apple ID and my Passowrd, I wrote them right but an error window appeard saying that incorrect Apple ID and my Apple ID cannot be used to unlock this iPhone...
I checked my Apple ID on iTunes and iCloud to make sure that my password and my account are ok and it was working... I thought it might be a problem with the SIM Card so I went to O2 customer service and they said that the problem is not with the SIM Card as the SIM Card is working so they can not do anything for me... On the window of activation logging in there is link "activation help" and by clicking it after typing my Apple ID and password, a window appears saying that my iPhone could not be activated because activation server cannot be reached and asking me to try activating on iTunes or trying again later and if this problem persists I should contact Apple support...
I tried activating on iTunes and the same message appeared that my Apple ID cannot be used to unlock this iPhone and I tried activating many times for two days on my iPhone and iTunes and nothing is working... I also tried to call Apple service number in Slovakia (0800004640) and they said for iPhone I should contact my carrier network which I contacted already and they didn't help at all as I mentioned before... In the end of my tries I went to iCloud finder to find my iPhone on my account and I didnt find it there because I never set up iCloud on my iPhone before...
I don't know really what to do as I'm the first and the only owner and my Apple ID is the only linked to this iPhone, even on the window of activation logging in it is written there that this iPhone is currently linked to an Apple ID (b*****@yahoo.com) which is true ... This iPhone is unlocked one and it was working in Saudi Arabia and Egypt with various SIM Cards... In the end thanks for reading and I hope to find a solution for this problem...

Thanks for your answer...
My iPhone was connected to a wifi internet when I tried to activate it and when I tried activation by iTunes I was using my laptop with windows 7 which was connected to internet by cable.
I updated my iPhone to IOS 7 when I was in Egypt and I had no problems with updating it and I can't remember if finding my iPhone option was on or off before updating to IOS 7 and as i understood from searching internet that to use iCloud Finder on web from computer to find my iPhone it should be set up already on my iPhone and I didn't set up iCloud on my iPhone before and my Apple ID wasn't verified for iCloud till today, I verfied it by logging in iCloud from a friend iPad.
I was considering already the option that my iPhone has been hacked but if this happened so how I would unlock my iPhone and activate it to back to work? who would help me with that? I'm so tired of being without my phone for almost 4 days and I started to consider not having any Apple product anymore... I think that this way to secure the consumer has a lot of conflicts...

Downloading iTunes 7.6 for windows not working properly

OK, I downloaded iTunes 7.6 for windows 3 separate times. The first time after completing the download, an error message popped up that states: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." Well I went back to your site two more times to download the software again, each time I get a pop-up that asks if I want to remove iTunes or repair it, each time I select REPAIR and it goes through the download process and says it is complete. Then each time I attach my shuffle, that error message pops up again and says there that iTunes is missing files. SOMEBODY PLEASE HELP!!!! I CANNOT ATTACH MY SHUFFLE TO ACCESS MY MUSIC!!!!

http://www.oldversion.com/program.php?n=itunes

After the upgrade to Mozilla 32 using csv files to import data does not work anymore. What should I do?

Hello,
After the latest upgrade to Mozilla 32 a previously recorded imacros scirpt in which the data was being imported into mozilla from a csv file keeps erroring out. This same problem occurred with the with the upgrade to Mozilla 30 and was fixed when Mozilla was upgraded to 31. Can you please advise on how to correct the problem so that csv files can be used in conjunction with imacros scripts. I would like to point out that imacros still works without the use of csv files, but when you introduce a csv to the script the imacros does not work.
Thank you,
Eugene

hello eugene, please directly contact the imacros extension developers through the means provided at their [http://forum.iopus.com/viewforum.php?f=11 forum] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

I have tried to install itunes and it is installed but it is not working properly need to talk with a tech rep

I have tried to and have installed itunes on my pc to download music to my nano i have had problems doing so i can not sync music for my computer file i have tried a different nano need to talk with a tech rep please provide a NUMBER FOR ME TO CALL

LCSO Wisdom wrote:
need to talk with a tech rep please provide a NUMBER FOR ME TO CALL
Then pick up the phone and call them.
Phone numbers can easily be found by clicking the "Contact Us" link at the bottom of every Apple webpage.

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

My iTunes album discovery widget does not work properly.

Hi,
I wanted to use the iTunes album discovery widget from apple.com for my website to promote a new release of mine. While the widget will take you to my iTunes page when you click on view, it will not play audio when one presses play on the song selection of the widget at my website. The play and stop feature seem to work, but no sound. I put in some major acts into the widget and I had the same issue. I contacted Apple and they told me they are not responsible for their widgets and to find someone who knows more about them possibly so here I am.
http://widgets.itunes.apple.com/builder/
Thanks,
missingsock

http://www.woodshampoo.net/ is my link to see the widget on my webpage music page
missingsockout

Itunes "convert higher bitrate songs" not working properly

hello,
i recently used the option "convert higher bitrate songs to 128kbps aac" to save storage space on my iphone. it worked like a charm and i saved several gigabytes.
HOWEVER, as soon as i sync my iphone again, it starts to reencode approx. 60 tracks again! it takes a while of course and after that, the tracks are converted and on my iphone (i checked it). if i sync again it will reencode again the very same tracks (and delete them before from my iphone). this is really annoying because it costs time and cpu usage.
i didnt changed those files, i checked the date when they were changed, and they werent changend at all this month!
does anyone have an idea? i really like this option, but if it means that i have to convert 60tracks everytime i sync my iphone, i will have to disable it...
regards

I am seeing this artwork bug too, on my nano. It seems to be tied to the 128 kbps songs, but I can't pinpoint exactly what makes it happens.
All I know is, now that I'm using the 128 conversion, I have to reset my nano at least once per day to get artwork back. It also seems to be tied to coming out of pause or hold. After I've paused music and come back later, the artwork shows a white box. But not all the time, so I wonder if it's only when I pause a song that has lyrics.

When the newest update to 24.3.0 was installed, I received duplicate messages and all of my message filters are not working properly. How to fix easily?

24.3.0 caused errors in my message filters. Error messages occur when getting new mail that has a filter. Not sure why this happened, but would like an easy fix instead of deleting all and creating new filters. Tried edit option, but to no avail. Was going to try clearing log, but I'm just guessing. Can anyone help me out with this? Thanks.

I have run every version from 2 to 30 and the message filters have not been an issue in any of them. Perhaps if you restart from the help menu (Alt+H) > restart with add-ons disabled and see if an add-on is causing your issue.

SOME OF THE KEYS ON MY KEYBOARD WILL NOT WORK PROPERLY. HOW DO I FIX THIS? I NEED MY COMPUTER ASAP AND APPLE WILL NOT TALK TO ME ON THE PHONE UNLESS I PURCHASE APPLE CARE WHICH I CANNOT AFFORD.(SORRY FOR CAPS ONLY WAY I CAN USE ALL KEYS)

can anyone help me? my a key, z key, q key, anf backapace key do not work for some reason and when they do it just types out a bunch if random letters and symbols. im not sure how to fix this but apple wont talk to me unless i lirchase something and i can afford to do that. need this comp to work for achool isnthwre a way tonremive keys ans see whats wrong?

Fast answers:
1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
https://discussions.apple.com/thread/3819550?start=0&tstart=0
2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

Since updating to itunes 11, Home Sharing is not working

Since updating to itunes 11, Home Sharing is not working.
I am running Windows 7, 64-bit.
All mobile devices are up to date with ios, including 2 apple tvs (2 & 3), iphone 4s and 3gs, ipad1 & ipad2.
I've rebooted twice, turned home sharing off, then signed back in. Still nothing. Rebooted the mobile devices. No joy.
Curiously, wi-fi sync is also not working - the devices are not showing up in itunes unless I plug them in.
Please Help!

Yes, you guessed. After some rebbots it stopped working again .So it seems it is not a Firewall issue. Kept looking and found a suggestion in a forum to disable IPv6, apparently iTunes for Windows doesn't work well with IPv6. So I did, and after several rebbots and tests, both Home Sharing and Apple TV 1st Gen are working. To disable IPv6, follow this link
http://support.microsoft.com/kb/929852
It has an MS Fix It that will do it for you. Or if you wnat to go manual, follow this discussion, this guy was having the same issue several months ago
https://discussions.apple.com/thread/3507281?start=75&tstart=0
So far IPv6 is just being rolled out, and it will be a few years until everybody abandons IPv4 and go only with IPv6, so you shouldn't have any issues disabling it. And by then iTunes -I hope- should be fixed to work correctly with IPv6. Try it, and if you find any issues you can always enable IPv6 using another MS Fix it program, or manually reverse what you did
Hope it is fixed this time!

HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

Contact the email provider and obtain the correct setup information.

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device? When will iTunes come to Ubuntu

Similar Messages

Maybe you are looking for