I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Similar Messages

Can not open lightroom 3.6 it shows error reading preview cache and closes what can i do. it does not stay open long enough to do anything

has anyone had an issue that lightroom has error reading preview cache and closes immediately. what can i do to correct this

Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

Hi FancyJean!
Here is an article for you about using Font Book and installing fonts that you have downloaded:
Mac Basics: Font Book
http://support.apple.com/kb/ht2509
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Just installed itunes but when i try to open it this error message pops up: "apple application support required." I've tried uninstalling and reinstalling but nothing works

Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works

When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
When you installed iTunes did you get any error messages?
Anyway, on the face of it it may be worth trying a separate install of Apple application support.
Uninstall iTunes again. Now open Apple Software update, assuming it is working.
It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
Before going on, can you get to this stage OK?
One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures.

I am using CS6 on a 64 bit PC. When I try to print A4 size layered psd files the program crashes. What can I do to rectify this?

I am using CS6 on a 64 bit PC. When I try to print A4 size layered psd files the program crashes. What can I do to rectify this?
Spoken to IT support who inform me its because files are on network, however they are on my desktop and program is installed on my PC not a network.

Other sizes print. Bizarre.

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

Suppress entries in the drop down list box for fields Priority and Category

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Hello,
For the transaction type 'Service Process' , I want to suppress certain values in the drop down list box for the fields Priority and Category based on certain conditions.I couldn't find a suitable badi for this scenario.
Is there a solution so that I can control the values displayed in the drop down list box ?
Thanks,
Sriram
Edited by: Sriram Sundar Rajan on Mar 17, 2008 12:15 PM

Font drop down menu won't stay open in Photoshop Elements 8

I have Photoshop Elements 8. Up until today it worked just fine. I have been trying to change the font type using the drop down menu of course. Every time I click on the drop down menu it tries to open, but will not stay open to make the change. The menu just flickers in the attempt to open it up.
I have reset the tool, deleted any preferences at start up using the Ctrl+Alt+sSiht keys and no help.
I am using a Windows 7 64bit system. Like I said, this hasn’t happen before. Now that I think about it, sometimes when a menu box is open it will disappear behind the main window and I need to find it again by toggling the window, this will make the change menu to reappear. But still no font drop down menu.
Anybody have any help?

If photodrawken's suggestion doesn't make any difference, which was my first thought on the problem, here are a couple of other suggestions.
You might have a bad font. Have you installed any fonts or programs that might have put in new fonts recently?
In pse 8 under Edit>Preferences>Type uncheck Font Preview Size and see if that makes a difference.
Also this lists a fix for missing scroll bars in pse 8 and even though that's not your exact problem it would be worth a try:
http://kb2.adobe.com/cps/865/cpsid_86508.html
Added:
Do you have any third party plugins installed for pse8?
MTSTUNER
Message was edited by: MTSTUNER

Clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar

Since I upgraded to Firefox version 3.6.10, clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar. My Tools > Options > privacy setting is to save history, and if I start typing a previously accessed website's address in the location bar, then the full address appears as a drop-down item. But not when I just click at the right end of the bar.

You can try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Where is the drop down list with "edit web part" for a list??

In Sharepoint 2010, there was a drop down list to the far right of a list. One of the options was to Edit Web Part. In Sharepoint 2013, I can't find the drop down list. Nothing is to the right of my list and mouse overs down't reveal
anything. I am trying to get to that area to change my toolbar type. Any clues as to where the "edit web part" has gone to?

I've been able to edit Web Part properties for weeks, but a few days ago, I could no longer do it, either by using the checkbox in the upper right corner of the web part or by using Web Part Properties in the Web Part tab. It's greyed out.
Then yesterday I could do it again and today I can't. An intermittent problem!
No one has changed any Sharepoint Admin settings.
Anyone have any ideas? They would be greatly appreciated.

I have firefox 4. I have xm radio on my computer. It is not staying on long enough. xm says I have to have google chrome 10.1 or higher. Which version of google chrome comes with firefox 4?

I installed firefox 4. Does it come with google chrome 10.1 or higher? I have xm radio on my desktop computer. The audio does not stay on long enough. If I have 10.1 or higher I thought that would help the audio as xm says that is what it requires and I don't know where to look to see if firefox 4 with google chrome comes with 10.1 or higher.

Google Chrome isn't part of Firefox, it is a completely different program.

In Firefox 4, how do I get back the context menu for the drop down list of the Location Bar so I can Open Link in New Tab, which I did often in FF 3?

Firefox 3 has a context menu for the drop down list of
the Location Bar. One option on this menu I used often
is "Open Link in New Tab" -- quite convenient.
This context menu has disappeared in Firefox 4.
Can I get it back?

See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

Unable to clear the drop down list of junk login ID's - I have a Mac OSX

When I go to sign into my yahoo ID, and I begin to type my e-mail account, a drop down list of junk log in ID's pop up. These are ID which I have entered my mistake in the pass. One of which is my password. I am unable to clear the drop down list of this junk log in ID's. I ask Yahoo how to do it and I was told that this problem is specific of my web browser. I need your help to clear that junk log in ID's. I have a Mac OSX, Version 10/4. Would you be able to explain simple what to do. This problem is annoying as every time I sign in that drop down list appear.
I would appreciate your assistance.
Sincerely,
Socorro Bery

good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

Display pages that reacts to different values in the drop down list.

I currently did up a simple drop down list that stores values retrieved from the database. I would like the program to display pages that reacts to the selected value without the press of any button, which means, if I select any value from the drop down list, the page will be displayed according to the value selected.
Below are the codes that I did for the retrieval of data from the database.
<%
        String username = "test";
        String password = "test";
        String thinConn = "jdbc:oracle:thin:@dbdev:1521:ORCL";
        Connection conn;
        Statement stm;
        ResultSet rs;
        String baseQuery ="SELECT DISTINCT ID FROM STAFF ORDER BY ID ASC";
        try {
            conn = DriverManager.getConnection(thinConn,username,password);
            stm = conn.createStatement();
            rs = stm.executeQuery(baseQuery);
%>
<strong>Retrieve ID from Database</strong>
    <select size="1" name="dropdown">
    <%
    while (rs.next()) {
        String id = rs.getString("ID");
        out.write("<option value=\"" + id + "\">" + "level " + id + "</option>");
                conn.close();
            } catch (SQLException e) {
    %>
    </select>Would appreciate if someone might offer some help to what I have to do next
Edited by: wyndsor on Jun 26, 2008 7:34 PM

cotton.m wrote:
[_An instant classic_|http://www.webdeveloper.com/forum/showthread.php?t=184937]
Sometimes I find myself wondering why people think they won't get caught with their cross forum cross posting. Then I realize that if they knew about Google they wouldn't have needed to ask the question in the first place.
It's kind of funny in an ironic sort of way.

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

Similar Messages

Maybe you are looking for