I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

garysm99 wrote:
Not familiar with structure view. How do I go there?
click in IDVD on this button

Similar Messages

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

I made a movie on iMovie and went to burn to DVD and of course I could not...contacted Apple and they said to download an app to help solve this problem...i did..so I could finally burn a DVD, but it will not play on my DVD player...HELP!!!

I made a movie on IMovie and went to burn it to a DVD ...I could not do this so I contacted Apple..they had me download an App and then I could make a DVD...but it will not play on my DVD player...does anyone know how I can solve this problem.. I purchased this to make DVD's and now I can not do that!!

This is a known issue. It really comes down to two key factors - what type of DVD are you burning to + what type of DVD player you have.
This article will help. It's lengthy and can be technical in some parts but should shed some light on your problem.
http://www.media.utah.edu/dvdworkshop/pdf/DVDCompatTest.pdf

How do i make a form that will tell me the difference between 2 figures?

how do i make a form that will tell me the difference between 2 figures? ie: the jan. value of account is 32,010 and feb value is 34,013 and march value is 31,089 i would like it to tell me the difference automatically... whichever it is bigger or less... i am sure that this is possible... but i am a complete newby to all of this and could use some help...
jan = 34,013
feb = 34,013
march = 31,089
etc...
etc...

panahead wrote:
i guess what i am trying to make is a form that will automatically calculate the difference in my investment account each month... and sometimes it goes up and sometimes it goes down... but having the difference calculated for me (without the possibility of me making a mathematical mistake) and then also giving me the percentage would be what i am looking for....
Numbers will do the calculations, but it doesn't read minds.
The formulas shown in my previous post assume a table arranged like the example below:
The results in the bottom three rows (Apr, May and Jun) are correct for the simple formulas given and for the data entered in the Amount column as the empty cells are evaluated as containing zero. In practice, you would want a formula that suppressed the calculation until something was entered in that row of the Amount column. That's easy enough to add, should you think doing so will be useful.
But it won't make Numbers read your mind.
Regards,
Barry

I transferred photos from my camera to my computer and created a burn folder. I recorded the burn folder on a DVD but it will not play on my DVD player. What am I doing wrong?

I transferred photos from my camera to burn folder on my macbook Pro. Made a DVD from the burn folder but it will not play on my DVD player. What am I doing wrong?

How did you do this burn? Did you use a program like iDVD? A DVD player requires that the data on the DVD is recorded in the proper format: MPEG-2. A program like iDVD will do this. There are other programs available that can do the proper coding (Roxio 'Toast' for example), but iDVD has the most features and is easy to use. It is no longer available from Apple, but if you search on Amazon, you can find 'iLife 11', a suite of programs including iDVD. It will function properly on Apple's current operating system, but it cannot make a High-Definition (Blue-Ray) presentation. It is Standard Definition only, as are all regular DVD's. One good way to present photos on a TV is to make a slidesow in iPhoto, then export that slideshow to iDVD, where it will be properly formatted for a DVD player. Or, iDVD can make its own slideshow of up to 99 photos. HTH.
Frank

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. Help!

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!

You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts.

My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

Hi john, try Burn...
http://burn-osx.sourceforge.net/Pages/English/home.html

Burned a dvd but, it will not play on my dvd player for tv

I created a slideshow with itunes music added in iphoto. I tried the recommended free "burn for mac" software download. It burned a dvd but, this will not play on my dvd player for tv. What software title can i purchase that will burn my iphoto slideshow to a dvd that will play on typical home dvd player for tv AND on a windows pc?

some dvd players are very picky on what they will play some only
play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
dvd burnable is a pretty fragmented std.

I've burnt a slideshow of my photos onto a DVD disc but it will not play on my DVD player. It plays ok on my acer laptop. I burnt the same disc with slideshow from my old dell computer

I've burnt a slideshow of my photos on my Apple Mac to a DVD+REW disc but it will not play on my DVD player or on a combined DVD/TV. However it will play on my wife's Acer laptop. I then erased the disc & burned another slideshow from my ancient Dell computer onto the same disc &it played just fine on everything. So it seems the problem ids somewhere in the Apple Mac process. Any ideas?
Keith C

Gary Scotland wrote:
If you want to play material on a dedicated DVD Video hardware player, you must create a DVD video disc, and you must use a DVD authoring application.The software creates files that the DVD video player can play and will burn them to a recordable DVD disc. Examples of applications are:
Roxio Toast and iSky DVD Creator
Mac's used to be supplied with iDVD authoring software but Apple discontinued it in 2011.
Thanks for that. Will need to check iSkysoft out. I am in the process of looking for a VisualHub replacement/backup. Especially when it comes to ease of use. Toast is ok. Just looking for something along the lines of VH.

I just changed my Apple ID and I verified it but when I try to login it says my Apple ID is not verified

I just changed my Apple ID and I verified it but when I try to login it says my Apple ID is not verified. Now I can't access my iTunes account at all. How can I fix this?

You need to click the link in the e-mail you received to verify.
Then you need to link the valid credit card info to your Apple ID if you want to download anything from Apple Store (iTunes, Apps and iBooks).
https://appleid.apple.com

HT3964 I have a MacBook Pro that will not boot up. The apple symbol Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

I have asked this question several times, and keep getting shunted back, about not being able to add a bookmark to a folder in the bookmarks menu

I made a folder to hold bookmarks of one type. when i tried to add another bookmark to this folder the folder will not show up so i can add this bookmark, the box only extends down a short distance, none of the folders are in the order they are supposed to be, and the one i need i can not access.

I have Stumble Upon and it is not affecting my Bookmarks links. DO you have any add-ons that are Bookmark related add-ons? Maybe one of them took over and you can find your folders in that add-on application?

How can I make a button that will work on iPads? (animate only on Mousedown)

I am making an interactive page in Adobe Edge Animate. It will double as a low-mem website and also as an iPad page and is part of a larger flash website which is highly animated.
This website sports two kinds of buttons; the ones linking to a label in the timeline and the ones linking to a URL.
The problem is that I do not want the buttons to work on mouseover because that will be completely useless on iPads and similar devices. That is why I want the thing to animate on mousedown.
What I did initially was to load the on and off states of the button to my timeline and made them into a symbol, after that I made two labels inside of that symbol; one for the on state and one for the off state. Below the first label there is a "sym.stop("ONstate");" action and then my off-state button graphic has a mousedown "sym.stop("skipON");" action. Then comes the tricky part, I wanted to reference the label on which it should land in a onclick action on a root level. It didn't work at all. I used "_root.stop("label");". As you can see my programming abilities are extremely poor, I'm a graphics guy.
Next, I decided to leave the mousedown action inside the symbol and do the onclick action on the main timeline, which did work for the most part, however it behaved weirdly. First off, the mousedown action worked perfectly, but not at the same time with the onclick action; You would click on the mousedown thing and it would stop on the frame and then you would need to click it a second time to go to the label.
There must be either something I'm doing wrong or this function is not supported by the Edge Animate beta. But my programming abilities are so poor to pinpoint the real cause of the problem.
Can anyone help me please?

Hi, redcrowdesign-
Part of the problem is that you're using ActionScript syntax in a JavaScript environment. Instead of using _root, you can access the Stage object. If your symbol is only one level down, you can use sym.getParentSymbol().stop("label");. If you have a nested symbol, you may find sym.getComposition().getStage().stop("label"); more effective.
That being said, you might want to rethink your UI model and focus your iPad interactions on the touch events, which are much more performant than the mouse events.
Hope that helps,
-Elaine

ITunes 11.1 and / or the Podcast app on iOS 7 will not allow me to create play lists in iTunes. Is there an app that will allow me to create podcast plays lists and play them on the iPhone running iOS7 ?

iOS 7 will not alow podcasts lists in the music app so we have to use the podcast app
but iTunes 11.1 and / or the Podcast app on iOS 7 will not show podcast play lists created in iTunes (well maybe it does but clicking on the podcasts app causes iTunes to freeze so can not select)
sometime some folders created in iTunes have appeared with the Podcast app but others not.
creating an on the go list in my iphone is agony - I have over 100 podcasts I have subscribed to and when creating a list you can not view by most recently downloadded podcast
AND you can't search (no search bar) so I have to scroll through to find a podcast that might have been updated - but they are not in any logocal order that I can work out (not alphbetical or date added).
Video podcasts are mixed with audio
podcasts I delete (unsubscribe to) keep coming back
its a disaster
my question is there an alternative iPhone app that works with iTunes
no I don't want an app where I have to download to the phone directly, thats 100 subscriptions I will have to make agaian

Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost.

I asked this question in iMovie and told it belonged here. When i try to copy homemade movie _TS format it will not auto load in DVD player original does. How do I make a copy that will auto load?

Similar Messages

Maybe you are looking for