I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
Hope this helps.
MtD

Similar Messages

  • New Mac Pro and migration question

    I will be getting a new Mac Pro in a day or so. I currently have a G4 with all the Adobe suite programs and more. I am wondering if it is best to install those fresh. It sure would help to get all my Dreamweaver settings as I have a ton of sites.
    Should I just transfer mail and prefs etc.

    There are many pros and cons to doing such a thing. The biggest pro to doing so is expediency. Manual transitions, while more efficient, can be quite a pain even when you know what goes where. When this works it works great.
    However, there are downsides to it. Firstly, being a new system the best way to gauge it's performance is to have everything fresh and new. While it's more effort you do get a much better feel for what you system can do and a much better awareness of when things are wrong.
    Then there's the migration itself. With a data only migration I can't see much going wrong but there are instances when a migration does affect total system performance.
    So I guess I've not really answered your question. There are benefits to opting both ways.

  • Final Cut Pro 5 upgrade won't accept full product serial number

    Just got FC Pro 5 upgrade and I am trying to install on top of FC Express Retail. I bought FCE at the apple store, so it's full retail.
    The installer first asks for the FCP s/n, then I get a pop that says I've entered an upgrade serial number and will need to enter the full product serial number. When I type in the FCE s/n, the OK button stays dimmed.
    Any advice? Apple's closed today.
    Thanks!
    PowerBook G4   Mac OS X (10.4)  

    http://www.apple.com/finalcutstudio/finalcutpro/upgradeguide.html
    Which upgrade did you get? The $399 version or $699 version? Only the $699 version upgrades FCE.
    Shane
    "There's no need to fear, UNDERDOG is here!"

  • I just bought a new macbook pro and was able to get iWorks for free but the App Store is trying to charge me for iLife.

    What do I need to do to get my free copy of iLife?

    You should accept the apps within the App Store -> Purchases tab.
    Otherwise delete adoption.plist from /Library/Application Support/App Store/ or /Library/Caches/com.apple.appstore/
    Of course it depends on the age of your computer. If it was purchased before OS X Lion was released then you need to reinstall the iLife suite from the original DVD.

  • I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is

    I  have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive  I keep on getting the message "lightroom cannot use the catalog named " " because it is  not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

    Hello Forum Members,
    I figured it out. You have to select  the actual logo of the Lightroom catalog and then click on  "get info" and allow what ever your new user name to "read and write". That worked!
    Henri Silberman

  • I ran out of space on my time machine  because I bought a new I MAC to replace the old one.  So I copied the old one on the new one  and in addition to that I own a macbook.  So what should I do erase the old IMAC on my  Time capsule ? Shall I reset it?

    I ran out of space on my time machine  because I bought a new I MAC to replace the old one.  So I copied the old one on the new one  and in addition to that I own a macbook.  So what should I do erase the old IMAC on my  Time capsule ? Shall I reset it?

    Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
    A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
    When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
    If not you can also add a USB drive to the TC, and use that for one of the computers.
    The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

  • I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?

    Hi Jeff,
    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
    Then Reset your Keychain...
    http://support.apple.com/kb/TS1544

  • I have a new mac pro and can't get a side scroll bar.  What can I do to get this?

    I have a new mac pro and can't get a side scroll bar.  How can I get this?

    The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
    In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

  • Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.

    Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.  I want to start over and I can't even get back in to do this bc it won't take any of my passwords.  How can I start over completely?

    You got a new laptop? try asking there or in Lion forum.
    If it has Lion, use the Recovery Mode boot Command-R
    Use that to erase and reinstall - it has network install ability.
    Want MacBook Pro forum or Lion Community?
    MacBook Pro
    Lion Mac OS X Communities
    New, as in from Apple, it would have asked for full setup.
    Want to reset the password? (it is used then I'd wipe it clean and start over)
    How to run the Password Reset utility in OS X 10.7 Lion

  • New Mac Pro and LED cinema display

    Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

    I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
    Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
    and what happens to the power cable that's attached to the LED display?
    It is not used if you don't have a MacBook.

  • New Mac Pro and Apple Cinema Display

    Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

    Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct  connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only  provide xxxx resolution on the new Mac Pro's. Corsair.

  • HT1209 I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

    Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?

  • New Mac Pro and now no FLV Export option in FCP

    Hi Folks,
    I have a new MAc PRo and just loaded final cut studio 2 and flash 8 onto it.. I know have no option in the quicktime conversion setting to export to FLV?
    Please any help would be huge at this point...
    Oh.. I loaded After Effects 7 to the new Mac PRo and I get the Export to FLV option from AE so what is the deal?

    Hi Todd, I bet you upgraded from a PPC machine.
    The real problem here is that Flash 8 is/was not a universal binary (i.e. an app that is supported on both the PPC and the Intel Macs).
    So the included "FLV Exporter" QuickTime component does not show up in the export dialog even if it's installed as it just does not get loaded.
    (Should be in "NameOfSystemHD/Library/QuickTime").
    If you update to Flash 9/CS3 you get a universal binary app and QT exporter component and it will work again on your (Intel) Mac Pro.
    Btw., the Flash support that was in QuickTime had nothing to do with export - especially not with FLV - but with playback of Flash content.
    Addionally, AE 7 isn't a universal binary either, so you will suffer some pretty serious performance losses.
    Best regards, Oliver

  • New Mac Pro and Vram

    My new mac Pro has dual AMD FirePro D700 6144 MB but After Effects only sees 2 gigs of VRam in the preveiw menu.  Why is that?

    Hi shasho,
    This issue has been reported that After Effects unable to read full display memory on New MAC Pro and is showing 2GB of available memory how ever system is equipped with 2 Card with 3GB memory each. We are working on this issue on a priority basis.
    Regards,
    Vinay

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

Maybe you are looking for