I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about so I don't loose any of my photos/keywords? Wh
I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?
The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.
Similar Messages
-
Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks
Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out. I imagine you would need to scan and email that proof if it works at all.
-
What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.
First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem! -
I currently capture HD 1080i video from my Handycam using iMovie 11, then convert the .mov files to .mp4 using Aunsoft Video Converter. Then view the videos on apple tv. The quality is definitely lacking. Not sure if the loss of qulaity is from using iMovie 11 or the Aunsoft software. Any ideas on how to capture HD qulaity video and view on Apple TV?
I currently capture HD 1080i video from my Handycam using iMovie 11, then convert the .mov files to .mp4 using Aunsoft Video Converter. Then view the videos on apple tv. The quality is definitely lacking. Not sure if the loss of qulaity is from using iMovie 11 or the Aunsoft software. Any ideas on how to capture HD qulaity video and view on Apple TV?
-
Hi, I bought my iPhone in Canada but have moved to Australia. I need to speak with someone at Apple Canada what is the best way to do this? Is there is an e-mail address? When I call the Apple Canada number it says I can't call from my location.
In what way did you buy your iPhone? If you paid full price at the Apple Store then your phone should be provider unlocked and should work with practically any SIM card you choose to insert in it. If you bought it cheaper with a contract then it's provider locked then your best bet is to call your cellular provider in Canada. Be sure to note your IMEI number (Settings > General > About) as they're going to need it to do an unlock. Be aware they may or may not charge for this.
-
How do I easly send my pictures from Aperture to CVS for actual printing? I always have trouble finding my photos in the Aperture library when I need to load them into the CVS web interface. I can't even tell which photos they are without seeing them.
Also, what's the best way to do it from my Iphone. Doesn't seem to be a good app for that.Export the adjusted version from Aperture to the Desktop. Download the exported version to CVS.
You shouldn;t be looking in the Aperture library (if by looking you mean using the Finder on the library). Use Apertures tools to do this. Besides the only thing you could get out of the library would be the original file that you imported into Aperture not the version with your adjustments. -
What is the best way to work with Word documents in The InDesign CS4???
I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter -
What is the best way to double buffer in this case and how to do it....
currently I have
public class Frame1 extends JFrame{
//inside this class I call up circle class, rectangle class, etc.... to draw
}I am making a "paint" program, and I have individual classes to handle the paint methods heres an example:
abstract public class Shape {
public Shape() {
public abstract void draw(Graphics g, Color c, int x, int y, int width,int height);
}and then....
public class Circle extends Shape{
public Circle() {
public void draw(Graphics g, Color c, int oldx, int oldy, int newx, int newy) {
g.setColor(c);
g.drawOval(Math.min(oldx, newx), Math.min(oldy, newy), Math.abs(oldx - newx), Math.abs(oldy - newy));
}There is also a Rectangle class, line class.... etc! So my question to you is the following... what is the best way to implement double buffer in the individual classes? And how to do it?? And also.... the drawings should be kept inside a jPanel.
Any bit of help is much appreciated Thank you!!You don't need to do double-buffering. Swing
components are double-buffered by default. Just make
sure you override paintComponent() and not paint().
And even if you had to, why would there be any
difference in implementation for your classes whether
they paint to on- or off-screen graphics?I need to override paintComponent()? what if I don't...
I am using JBuilder2005 and they automate somethings for me. So thats how they did it when they created the application they did this....
public class Frame1 extends JFrame{
/*** all my code here***/
public class Application1 {
boolean packFrame = false;
* Construct and show the application.
public Application1() {
Frame1 frame = new Frame1();
// Validate frames that have preset sizes
// Pack frames that have useful preferred size info, e.g. from their layout
if (packFrame) {
frame.pack();
} else {
frame.validate();
// Center the window
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = frame.getSize();
if (frameSize.height > screenSize.height) {
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width) {
frameSize.width = screenSize.width;
frame.setLocation((screenSize.width - frameSize.width) / 2,
(screenSize.height - frameSize.height) / 2);
frame.setVisible(true);
try {
jbInit();
} catch (Exception ex) {
ex.printStackTrace();
* Application entry point.
* @param args String[]
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
try {
UIManager.setLookAndFeel(UIManager.
getSystemLookAndFeelClassName());
} catch (Exception exception) {
exception.printStackTrace();
new Application1();
private void jbInit() throws Exception {
} -
What is the best way to extend a Wireless network?
Hi,
We have 3 devices,
1) Our Primary Network Router (which creates our office Network and has DHCP enabled).
2) We have and Airport Extreme, which is used to create our Wireless Network (THIS IS SET TO “Create Wireless Network”), it has DHCP Enabled, its DHCP IP Scheme is set to 192.168.2.x, where the IP Scheme of our Primary Network is set to 192.168.181.x.
3) We have an Airport Express that we are trying to use to EXTEND our Wireless Network.
The most important thing we are trying to accomplish is to isolate the Wireless Network from our Primary Network, so Wireless Clients can access the Internet, but CAN’T SEE or ACCESS the Shared Network Volumes AVAILABLE ON THE PRIMARY NETWORK.
At the moment, the Wireless Clients can access the Internet and receive an IP in the range of 192.168.2.x from the DHCP Server in the Airport Extreme. That part of it is working, but the Wireless Clients can unfortunately still SEE and ACCESS the Network Volumes available on the Primary Network. WHICH IS NOT WHAT WE WANT!!
Question 1: How can we have the Airport Create a separate Network, so the Wireless Clients CAN’T SEE or ACCESS the Network Volumes from the Primary Network, but can still get access to the Internet through the Primary Network?
Question 2: What is the best way to use the Airport Express to “EXTEND” the Airport Extreme’s Wireless Network? I have tried WDS “Main” for Extreme and WDS “Remote” for Express, but all that doesn’t allow you to use the Extreme to Create a Separate Network, it uses the DHCP Server built into the Primary Network’s Router. Also tried to set the Express to “EXTEND WIRELESS NETWORK”, which seems to work, but I am not sure why. Because I don’t have a cable from the Extreme to the Express, which is sounds like you have to when it is setup that way!!
Any help would be greatly appreciated!!
Thanks
KalaganQuestion 1: How can we have the Airport Create a separate Network, so the Wireless Clients CAN’T SEE or ACCESS the Network Volumes from the Primary Network, but can still get access to the Internet through the Primary Network?
There is no way to do this. Any of the wireless clients of the AirPort Extreme base station (AEBS) can see any device connected to the AEBS's WAN port. Clients of a subnet can see anything on the supernet.
You could configure you network like this:
Internet-> (WAN) AEBS (LAN) -> Primary router
As long as the Primary router was providing DHCP/NAT the things on the LAN side of the Primary router would be hidden from the AEBS clients.
A better solution may be to have 2 completely separate networks OR invest in some type of network security firewall device to actively isolate your Primary network.
Question 2: What is the best way to use the Airport Express to “EXTEND” the Airport Extreme’s Wireless Network? I have tried WDS “Main” for Extreme and WDS “Remote” for Express, but all that doesn’t allow you to use the Extreme to Create a Separate Network, it uses the DHCP Server built into the Primary Network’s Router. Also tried to set the Express to “EXTEND WIRELESS NETWORK”, which seems to work, but I am not sure why. Because I don’t have a cable from the Extreme to the Express, which is sounds like you have to when it is setup that way!!
WDS is 802.11g's method of wirelessly extending a network.
"Extend wireless network" is 802.11n's method of wirelessly extending a network.
Neither of them require the AirPort Express (AX) to be cabled to the AEBS. -
What is the best way to handle .mod files in premiere pro cs4?
I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
Thanks.I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
I noticed a couple different interesting statements:
posted by mmontgomery:
In the case of .MOD, you are actually getting a MPEG-2 file. The way
video files work is that there is a codec (COmpressor/DECompressor)
algorithm and a file wrapper (or extension). A JVC .MOD file is a
MPEG-2 encoded file, with a .MOD extension.
You're faced with two
challenges, first the .MOD file type is only recognized and support by a
few applications. I think we covered some of those already. The
interesting thing about wrappers and extensions is that they can be
dealt with in a variety of ways. Sometimes all you need to do to convert
the video file to a compatible video file is to change the extension.
In the case of .MOD files that's not enough. The .MOD wrapper apparently
does a few more things than just bare a unique extension name. It
requires a slightly more complicated method to convert that file. That
is why there is supplied software and that certain third party
applications have .MOD support.
(posted 2 years ago)
This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
However, another user said:
posted by futball8:
I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
the .MOD files as .MPG and then import into PP CS3. It takes a small
amount of time to conform the audio, but no file conversion is
necessary. It's a pretty slick workflow and I've never encountered any
problems editing them this way.
(posted 5 months ago)
One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
That said, there seems to be a couple of different real solutions to this problem that I have found:
1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
posted by macksgarage:
While Elements 'supports' these files, it is markedly unstable and frequently crashes while using the files, though the application is otherwise reliable. The solution I have arrived at is to repair the container using ffmpeg. (see #3)
(posted 5 months ago)
2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
posted by macksgarae:
If you are not familiar with ffmpeg, it may be a bit of a bear to
learn, but it's not only useful for this, but functions as a video swiss
army knife useful for splicing, muxing/demuxing, and rendering just
about any format into just about any other format.
ffmpeg is an open source project from the linux world, but it has
been ported and is supported on windows. Fetch it here and place it somewhere handy
on your system.
To rewrite the container into a nice, standards compliant .mpg file
that doesn't make applications die, WITHOUT rerendering video or audio
itself, I use this command.
ffmpeg -i INFILE.MOD -acodec copy - vcodec copy OUTFILE.mpg
This not only renames the file, but actually rebuilds the container
around unmodified video and audio data, yielding a file which works much
more stably with Adobe applications, and presumably others as well, as
ffmpeg's open source development goals result in very standards
compliant files.
(posted 5 months ago)
Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better? -
What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?
Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane -
What's the best way to dry an iPhone that was briefly in water? Rice? How long?
iPhone 5 was briefly in water. I turned it off immediately. What is the best way to dry it? It's in a bag of rice right now. If that's good, how long should it be in there before turning it back on?
If you dropped it into water and it was submersed, even for a few seconds:
IMMEDIATELY
Turn it off, remove the sim card.
Put it in a bowl or box of uncooked rice.
Leave it there a few days (3 days is optimal).
Your warranty is voided by exposure to water. There are two sensors in the iPhone which are white, and turn red or pink when touched by water.
Repair coverage? - Check your Service and Support Coverage - https://selfsolve.apple.com/agreementWarrantyDynamic.do. This will also show the make and model of the device. -
Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV
You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André -
I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?
Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2 -
My father has just bought an ipod classic and he wants to use my PC to download from I tunes. He is 88 and does not have one of his own.
I have a number of questions: What is the best way for me to set up my computer for to allow him to do this.
Would he always have to use my PC once he is set up. Can he download from elsewhere?
Can I sync his IPOD into my I tunes account ( Is this even legal).
Thanks for any advice.Orca Sn10 wrote:
Thanks for your help. How do I do it with the iTunes on the PC. All my music is on an external hard drive and not in iTunes
Thanks in advance
Nick
Nick,
You will need a Windows PC with iTunes running and a working copy of Windows Media Player available on the machine. (iTunes calls WMP for the conversion from WMA). Then just drag the WMA file(s) into the iTunes Music window.
iTunes will detect it and give you the dialog shown below, to which you choose "Convert." iTunes will create a new version in the format/bitrate set in your Import preferences (MP3 in my example below), and immediately add it to your iTunes library.
The WMA original will be left in place, so you can delete it if you have no other need for it.
Maybe you are looking for
-
Issue with Service Entry Sheet Acceptance
Hello, I am running into an issue when accepting service entry sheets. Here is the scenario I created 6 service master records and assigned unique valuation classes to each one of them . Each valuation class determines unique G/L account in Inventory
-
Farcebook login form works on PC and MAC not on iPad and iPhone
Hi We created this test page http://www.zuiliuniversity.com/login If you click on the text it creates your account /and/or logs you in. BUT Changes the link to: http://www.zuiliuniversity.com/Default.aspx?PageID=14977116&Error=Thank+you+for+logging+i
-
Jsf not rendering the new data
On the page a.jsp, when i select the year and company name, it displays the reqd company info. when i click edit, it goes to b.jsp and displays those information. after i edit, i click save. data is updated in the database and it goes back to a.jsp a
-
How can i find how many smartforms using a particular smart style
hi experts , how can i find how many smartforms using a particular smart style thnks in advance
-
Hi please i try to add my iPhone 4 here https://supportprofile.apple.com/PramsAddRegisterProduct.do i can't do this is show to me According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log