I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?
I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?
Thanks for no help... but for anyone else, turn off itunes match on the ipod
Similar Messages
-
I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?
JPPI-
Did you try it with the iTunes your Mac already has?
Try running Software Update in your System Preferences. That should bring your computer up to the latest software available for 10.4. You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
Fred -
I downloaded OS X version 10.6.8 when I try to install I am being told I need OS X version 10.6.8 to install it.
Snow Leopard needs to be purchased in DVD form, and is not available as a download.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
I just bought lightroom 5 but when i try and register it it says that it is only an update
Hi i just bought lightroom 5 thinking that I was downloading the program but when I put in the serial number that was emailed to me it says it is only an update serial number and I need the original. What do I need to do? Thanks
Hi,
Please follow this link: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html
Thank You
Arjun -
I just bought and downloaded quicktime Pro for it's exporting capabilities. When I tried to install it on my imac it said it couldn't because QT 10 already exists on computer. When I dumped quicktime 10 in the trash and restarted computer, I still am unable to install.
You can't install that version on Snow Leopard. Look here instead:
http://support.apple.com/kb/DL923 -
Can anyone help? I have bought an iMac but when I try to sync it with my iPad it says I need to update the iPad to version 10.6.3 or later yet when I try to update the iPad it says it has the latest update which is 6.1.3 how can I fix this so I can sync the two?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
Hi, i've just bought the game "Order and chaos" on i-tunes for my iphone 3gs. But when i try to install it to my Iphone it says that im not compatible.I need to know what the problem is. Help me please, i dont like to pay for something that dosn't work!
i have downloaded the most current version and when i try to install it, it tells me my computer software is not new enough but it will not show me any software updates?
Is that a Mac OS or a Windows OS you're running on that computer, dawn? If it's a Mac OS, what do you have? 10.5.8 Leopard or something higher? -
Hello,
I have a 4 yo mac desktop system unkown i downloaded latest version of itunes for use with my iphone5s but when I try to install I get an error message reads" requires ox 10.6.8 or better be installed?....stystem update check shows no updates available.....helpGet more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard (if you don't already have it -- OS 10.6), but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing, or if you already have some lower 10.6 version, run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931 -
hello
I have install photoshop CS4 ( 11)
but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?!
but its installed and I use it ><
see AttachmentPlease do not use the post title to post the entire question (no offense, it just makes the forum look ugly). As for your question - you really did install it? I mean with serial and install disc? If so, the update would work, because it would find the proper install info. That not being the case, there are a few things that may be wrong:
- due to you language settings, the installer cannot find the folder because it has a different name (though on Vista, that shouldn't be an issue)
- at some point, you used the CS4 Clean Utility/ Script to remove install info
- you are using a pirated copy that you may have bought on eBay or elsewhere that has a modified installer to circumvent licensing
- you are using an unlicensed version a "friend" gave you and that never was installed, but merely copied to the harddrive
That pretty much covers the immediate options, now it's up to you to tell us, which one may apply. Assuming, we are talking about perfectly legit software, re-installing it from the original media should take care of the problem. For illegal software, you should understand, that you are utterly on your own and nobody will help you, much less on the forums of the company producing the software.
Mylenium -
we have a router at home that is supposed to support 10 devices but when i try to connect my mac book pro it says another device is using my computer's ip address
Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?
-
I have been using lv_vfw.llb VI's for grabbing images from a CREATIVE WEB CAM ,i am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image ,i have been trying to play around with the RGB weightings but i am unable to get a color iamge,it shall be of great help if you could help me in doing this as it is urgent for me.Thanks for your help.
vicky,
I am unfamiliar with the lv_vfw.llb, and have not used it before. However, I noticed that you stated that you are able to grab in color, just not snap in color. If this is the case, why not just perform a grab and then extract a single buffer from this grabbed data, which would likely be in color? This seems like a possible solution to the issue that you are seeing.
Other than that, I really don't know enough about the lv_vfw.llb to be of much help on this issue. Hopefully another member of this forum will be able to assist you with this software.
Regards,
Jed R.
Applications Engineer
National Instruments -
Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?
It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it. -
Firefox is not open, will not open, but when I try to update or uninstall it says I need to close Firefox first. This is a common problem, as I have seen many posts with the same problem. I don't know what else I can say about it, it is pretty straightforward.
http://kb.mozillazine.org/Kill_application
-
I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first. Can't find a 10.8 system upgrade. What do I need to do to install Mountain Lion?
Buy it from the Mac App Store.
(70259)
Maybe you are looking for
-
My itunes stopped working after I came back from vacation. I tried uninstalling everything and updating to 10.1 but it won't open. When I click it, it shows up in the task manager for a moment and then disappears with no error messages. Quicktime wor
-
HP LaserJet 1200 Series + Updates
I recently tried to update the driver of my printer (HP LaserJet 1200). After countless (manual) uninstalls and reinstalls, messing around in Terminal, i.a., I still cannot get Mac OS X 10.5 to recognize the new driver. If anyone is knowledgeable in
-
How do I export photos from iPhoto to a CD-RW?
How can I export or copy photos in a iPhoto album to a cd-rw disk?
-
Report Templates in Oracle Applications 11i
By using predefined template i had generated a report and it worked prefectly.But my problem is when i was trying to generate the same report in the applications it is showing the following error APPLLCSP Environment Variable set to : Current NLS_LAN
-
10.4.4: Safari crashing immediately upon loading
Since I upgraded to 10.4.4, Safari is crashing the moment the window opens, before my home page (news.bbc.co.uk, in case there's something with that that's funny) begins to render. All Dashboard widgets similarly quit unexpectedly: their background g