I bought my unlocked iphone 4s in united kingdom and i inserted a sim it was working fine..but now i come to kuwait..when i insert a sim of kuwait but my iphone ask me to activate it but when i try to activate it my iphone does not support that sim.
i buyed a new unlocked iphone 4s in united kingdom. i inserted a sim card and it was working fine. but now i m in Kuwait for some time i inserted a local sim card and my iphone ask me to activate it but when i go through the process of activation my iphone does not read my local sim card. please help me out. i will be very thankfull.
thanks for this... I bought iphone 4 unlocked in USA in Dec 2012--being told by the salesperson IN the Apple store that there were Apple Stores in Quito & Cuenca. I'm in Cuenca now--NO STORE, & now that I need to activate--have also been told "not every cellular store CAN activate iphone!" I am reading about all these problems--yours is the first response that has a solution! Now going to set up with Claro... wish me luck! Any other advice you have on use in Ecuador--I'll be grateful :-)
Similar Messages
-
Hi, my Ipad was working fine but if I try to send an email, a note pops up that my email address has been rejected by the server, what does this mean? I am still receiving emails and can access websites through Safari.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
hello, i am currently in another country. My iphone is locked with three (3) united kingdom and i have my sim as well.I have updated my iphone, can I activate from here i.e. (out of country)
Yes you can. I activated my iPhone 4S with a Sim from a European carrier from the US when I updated my iOS and had no problem.
-
i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
Where, EXACTLY, did you get this phone? -
before i do updates for my iphone (to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becouse the SIM must be opened. when i try to open it , the networks does not appear (no service).
Its a serious problem and many people are facing the same issue on both locked and factory unlocked phones.
I wonder when Apple will address to this issue. After all it is losing all its reputation!
See this thread, many users are encountering the same issue:
https://discussions.apple.com/thread/3425746?start=75&tstart=0
I believe its a software issue and could be solved asap Apple fixes it! -
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB -
I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.
I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
Good luck. -
I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?
No, you have to sell yours and buy the new iPhone 5 with the proceeds.
Please do not double post. Asking many times does not change the answer.
Message was edited by: ckuan -
Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.
How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie -
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
-
Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
CrashReporter Key: ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
Hardware Model: iPad2,5
Process: WifiSurvey [139]
Path: /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
Identifier: WifiSurvey
Version: ??? (???)
Code Type: ARM (Native)
Parent Process: launchd [1]
Date/Time: 2013-08-08 19:01:13.476 -0500
OS Version: iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: 00000020
Exception Codes: 0x000000008badf00d
Highlighted Thread: 0
Application Specific Information:
com.accessagility.wifisurvey failed to launch in time
Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
Elapsed application CPU time (seconds): 19.954, 50% CPUSee:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I just replaced my iPod 5th gen. a week ago, and it was working fine, but when I went to go turn the screen on, it wouldn't turn on. I've tried to put it on the charger and it wouldn't charge and it wont connect to my computer, how do i fix this? I tried to reset the iPod, by pressing the home and power button but nothing works. It's literally a brand new iPod, I dont know what to do now. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I own a I phone 4. I recently changed my service from AT&T to Straight Talk. It was working fine but then I deleted the vpn file on accident. Now when I try to get on line I get a message that I am not signed up with a cellular data network. Does anyone know how I can retrieve or download the vpn file?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.
After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck -
Hi,
I recently bought mac book pro. I installed skype application on it and initially it was working fine but from few days it is not opening the application, showing some error.... Can you please help me to solve this problem.
bye
Harminder Singhharminder@apple - any luck? Try this, open Finder and press command-shift-G and copy and paste:
~/Library/Application Support/Skype
In this Skype folder: delete the file shared.xml and restart Skype.
See if this helps.
Maybe you are looking for
-
hi gurus, i am getting the data upto psa level.the infosource is feeding to one ods.but i am not getting the data in ods.strictly speaking i am getting the data in newdata of ods but i am not getting in active data table.can anyone reso
-
Tools Photoshop Image Processor improvement needed
If I use the Image Processor feature to convert images and I click on "Save in same location", then the images should be saved in (wait for it)... The same location! Please add an option to create a new directory for the converted files.
-
Adobe Reader 9.4.0 SIGSEGV in command-line PDF- PS conversion
The following should emit PostScript on stdout: acroread -toPostScript < PDF_FILE Try doing this with Adobe Reader 9.4.0, and all you'll see is Segmentation fault Adobe Reader 9.3.4 works just fine doing such PDF->PostScript conversions.
-
Emailing output using type M printer
i just recently set up a new printer of type M. When i use it with a spool dialog, all is well. i put in the printer id, and it pops up and asks for the email address. the system converts the spool to PDF and emails it, no problem. The problem is whe
-
Does the 4.01 upgrade fix audio problems caused by OS4 on the 3GS ?
I could no longer hear on my telephone without using the speakerphone after the OS4 upgrade. I did all the recommended fixes per Apple and nothing helped. All other audio is ok. My phone is 6 months old and was working perfectly before I did the upgr