I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

Similar Messages

  • I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

    I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

    This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
    Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

  • Safari will not let me copy and paste

    Safari will not let me copy and paste. I can still do it if I use Firefax as my browser.

    Please enable guest logins and log in as Guest. Launch Safari and test. Same problem?
    After testing, log out of the guest account and disable it if you wish.
    Mac OS X 10.6 Help: Creating a guest user account

  • HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

    My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

    When I try to open the slide to upgrade screen comes up and then the request for passcode and then the apple loading screen then Hello then update completed screen I select continue another apple with line showing progress then asking for password enter then Message and Face time a screen
    then a get started screen and then another apple with line showing progress and then my opening screen shows for a split second and then back to the apple with progress for a split second and then it shuts down.

  • When I try to log on to Facebook, My iPad will not recognize my password, and I get an error code 190. What is it and why do I get it?

    When I try to log onto Facebook, my iPad will not recognize my password, and I get an error code 190, but I can log on on my HP desktop. What is code 190, and why do I get it?

    I was using the FB app that came with the iPad. What I eventually did was.
    1. Held down both home key and on-off button until iPad shut down, then rebooted.
    2. Uninstalled FB app.
    3. Went to App Store and re-installed FB app.
    The iPad had numerous problems. My son saw my plea on FB as I was accessing it through my HP computer, and he walked me through it. While he was at it, he taught me how to disconnect auto-correct. I am not certain that I want to keep that off, but everything is working the way it is supposed to  the way it was in the beginning. 
    I am curious, though, as to what ears to the problem in the first place. After checking various sites, it seems that a code 190 has to do with windows not Apple.
    But thank you for the response.

  • It will not let me copy and paste

    I am trying to copy an letter from my affiliate page and put copy into my auto-responder but it says firefox will not allow this. If I can not get it fixed to day I will have to revert back to Internet explorer.
    Thank you Pam

    You can use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/allowclipboard-helper/
    See also:
    *[[/questions/936323]]

  • My pc will not allow me to un-install or install a newer version of iTunes.

    When I try un-installing from programs and features it says filepath iTunes64/setup.exe or iTunes64.msi is not available, please verify that the file path exists. I have no idea where to find this or if it even does exist, I really just want iTunes un-installed from my pc. I've also tried to install a new veriosn of iTunes from the apple website and it goes through the installer and I get the same errors, at the very end it says the old version of iTunes could not be removed. Due to all of this I cannot connect my iphone or ipod to iTunes because nothing works. PLEASE HELP!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT202774 I have I Phone 6 plus and I have Verizon Visual Vocie Mail service  I pay for it.  THe I Phone 6 plus will not allow the words to show on my screen from my voice messages.  What can I do.  I have been to Apple, Geek Squad, Verizon, searched  I ne

    I have tried to get a response from Apple concerning the  " I must have the readable version of the Visual Voice Mail from Verizon"  The I Phone 6 plus will not let the readable version of Visual Voice Mail from Verizon work on the phone.
    Why  what can be done to allow this to show on the IPhone6 plus screen.   please someone solve this    It should be so simple for the powers that built this phone.  Simple   but so important to the hard of hearing.  

    This is a user-to-user support forum so you may want to submit feedback to Apple at https://www.apple.com/feedback/iphone.html
    Also, if Verizon is charging you for Premium Visual Voice Mail (which according to their website is currently the only one that offers voice to text) you should contact them for a refund as the "Check Device Compatibility" link at their http://www.verizonwireless.com/wcms/consumer/products/visual-voicemail.html shows that only 16 phones are supported and the iPhone is not one of them.
    If you decide to switch phones, you may also want to consider that feature from Verizon only transcribes the first 45 seconds of a voicemail.

  • HT201210 When I updated my iphone 5 to ios 7, it will not allow me to sync to my itunes on my pc. I get a message that says, "A required iTunes component is not installed. Please repair or reinstall iTunes. (-45019)". I am using Windows 8 and dont know ho

    Yesterday I updated my iPhone 5 to IOS 7. Today I try to sync up itunes and downloaded the updated version. When I open it up I get the message, " A required iTunes componentis not installed, please repair or reinstall iTunes. (-45019). I am using Windows 8 and have no clue how to fix this.

    Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
    http://support.apple.com/kb/HT1923
    B-rock

  • HT1212 my itunes on my computer will not allow me to connect my ipod to this computer so what should i do?

    how do i whipe out my ipod 4 generation

    Maybe:
    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    or maybe:
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My 1st generation iPod shuffle will not allow me to sync any podcasts onto it...what do I do?

    My 1st generation iPod shuffle isn't letting me sync my podcasts even though they can play in iTunes

    I did recently move to a new NetGear wireless cable voice gateway router (CG3100) and this is when the problems started
    In order for the AirPort Express to "join" the wireless network provided by the Netgear router, you need to know exactly what type of wireless security settings that the Netgear is using.
    Unless you provide the Express with the exact information required to join the network, you will continue to see error messages after you click Update during the configuration.
    The message about the "settings have been successfully stored" is a misnomer. This tells you that the settings have been saved, but not if they were the correct settings.
    You will know that you have the right settings about 40-45 seconds after you click Update. If the light turns green, your settings are correct.

  • My Ipad is saying that I have the most recent update (5.1.1) when I clearly do not. It will not allow me to update to i0S8. Does anyone know what I need to do to get to the newest update?

    My Ipad which has a capacity of 28.5 GB (and I have used less than 10), is telling me when I want to update the ios system that I have the latest version (which they say is 5.1.1). This is not true. As I need version ios8 to download apps. Can anyone tell me why I cannot download the latest version and why my ipad keeps telling me I have the most recent version? I went into my Itunes account and tried to update it there while connected, but it is also telling e I have the latest version (5.1.1) too! Why is this happening and what can I do to obtain the upgrade?

    Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
    The app store always gives you the option to use a previous version of the app IF it is available for your device.
    Sorry but you are stuck without new hardware.
    PJRS

  • SAP not allowing to copy and paste from word documents

    Hi gurus,
    I am having the issue with the outbound Faxes from SAP. It fails with error code 816 saying
    "Message cannot be transferred to node AVENTX due to connection error (final)"
    I checked SM59 and it works fine. The configuration of the Fax Node looks good, Address Area "*"
    And when I go to SOST and "Repeat Send" then it goes thru?  Not sure what is that I am missing.
    Any help would be highly appreciated.
    Thanks
    JS

    DUPLICATE THREAD ([Error Code 816 in SOST|https://forums.sdn.sap.com/click.jspa?searchID=20921052&messageID=6852586])

  • My playlists are not allowing me to move the order of songs...what am i missing?

    When clicking on a song within a playlist to move it up/down in the playlist order....it won't move/follow my placement.
    Did I check something to lock this?
    thanks

    You need to select the left-most column with the track numbers to be able to drag tracks into a new order.

Maybe you are looking for

  • Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails

    Dear colleagues, tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Document

  • Help - Safari Frames Question?

    I'm trying to open a document I sent to my gmail account. I'm using safari and when I open the doc it doesn't show up but instead says, "This page uses frames, but your browser doesn't support them." Same thing happens in Firefox. What's the deal? He

  • How do I delete email addresses not in my contact list?

    My phone seems to be storing every email address I send to. When I create a new message and start to type in an address it brings up every email address I have ever sent to including those I only used one time. How do I delete these email addresses a

  • Data for weekedays only

    Dear All, I have Production environment I want to write a SQL query which should only return rows in database for weekdays only. There is one column in the table which contains transaction date. Is it possible if we skip weekend transaction for examp

  • Firefox with proxy configured keeps on asking for username and password

    This was asked a while ago, but no solution every posted. I use FF at work with a proxy. When I upgraded to FF28, an "old" problem came back - FF constantly pops up a window saying the Proxy is asking for a username and password. I did nit have this