I can hear people on call but sometimes they can't hear me, it maybe fine for afew mins but then sound drops again? Anyone have this problem and find a solution? Thanks.
I have an Iphone 4 13.5 GB, iOS 7.1.2. Currently when I make a call or someone calls me, I can hear people on call perfectly but sometimes they can't hear me. It maybe fine for afew mins but then sound drops again? Anyone have this problem and find a solution? Thanks.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
Similar Messages
-
I rented a movie from the iTunes Store and the download failed. I can't restart the download without error or rent other movies? Anyone have this problem and found a solution?
1. Sign out of your Apple ID
2. Reboot iPad
3. Sign back in to Apple ID -
When i am listening to music from iphone, teh sound is greater than the vocals. Does anyone else have this problem and if you do, how do I fix it, it's somewhere in the setting i believe
Plug the headphones all the way in.
-
Hello, I have Airport Express installed on my PC which runs XP. When I play my library through iTunes after about 2 hours Airport quits and I have to log out and restart my computer - very frustrating. Don't know if it is overheating but if anyone can make any suggestions it would be greatly appreciated.
Thanks
MurrayMaybe Mail's message index is corrupt. The following procedure is safe to try. Its only deleterious effect is that windows you left open in Mail at step 1 won't reopen automatically in step 4.
1. Quit Mail.
2. Browse to ~/Library/Mail.
3. Move "Envelope Index" to your desktop.
4. Launch Mail.
Mail will rebuild its index before it opens any windows. It may take a few minutes to rebuild. Be patient!
The new index is likely to be a different size than the old one, usually smaller.
Only the Message Viewer window will open--not any other windows you may have left open when Mail quit.
Be sure your mail folders are there and have their messages. They always are there, but the prudent check anyway.
Be sure you can send and receive mail. This always works, too.
After you have done the above, trash the old Envelope Index that you saved on your desktop. It is never better than the new one, and as time goes on, it becomes more and more out of synch with your mail folders, so you won't want to put it back in Library.
If Mail doesn't crash for a week or two, you probably fixed the problem. If not, you at least freed up some disk space.
Let us all know whether and how you solved your problem. -
Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?
When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!
-
My phone doesn't have any cellular phone functions...but it CAN send text messages and access data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, the last two have this problem and the first stopped working all together. I've had new sim cards put in, ive done hard resets on the phone, i've rebooted the phone, done battery pulls, and tech support has reset the signal to my phone. Nothing has worked. (I just "upgraded" <- lol.... and my old phone IS turned off.)
Im in 79707. So to recap my whole case: I upgraded my device using the verizon wireless website. I received my phone and switched my old SIM card from my Droid Razr Maxx HD into the new Galaxy S5. Everything worked fine until the next morning (May 31st) when I woke up and the phone wouldn't turn on. I took the phone to the local Verizon store and they were also unable to turn it on. They issued me a new Galaxy S5 (referred to as phone 2) and switched my SIM card into that one.
With PHONE 2 i was able to make calls and receive calls, along with text and data for approximately four hours. After that, i was unable to use the phone function of the device, but text and data were still functioning. I took PHONE 2 back to the Verizon store where they attempted to hard reset the phone twice, they also installed two new SIM cards at the store. After this they would get the same error, which is the phone just reading "Dialing..." after attempting to make a call. The Verizon associate declared the phone "DOA" and issued me another Galaxy S5 (referred to as PHONE 3).
PHONE 3 worked well, with phone text and data featured intact from when I received it on the after noon of the 31st until approximately 2:30PM on June 1st. I contacted Verizon Tech Support via Gmail phone to attempt the correct the problem. They reset the connection, had me do a battery pull, had me close the "phone" application, and erase the data and catche, then restart the phone. All of which had no effect. My phone is still able to receive texts and use data (even with wifi off) it simply cannot make or take phone calls. all it says is "dialing..." when I attempt to make a call. When other phones call my device it rings once on their end and directs them to voicemail, PHONE 3 does not ring on my end.
I have made sure my old phone is completely powered down. -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
I bought a movie on my 1st generation apple tv and it isn't automatically transferring to my computer so I can watch anywhere. Anyone have this problem? Is there a solution?
AppleTV1 can sync with 1 iTunes library - the top one listed in Settings>Computers.
Other libraries are 'shared' or streaming only, and appear under the top entry.
You basically need to remove the current iTunes library from AppleTV - select it and remove it - then adfd it again as the to 'sync' compuetr entry.
NOTE - changing the sync liubrary wipes AppleTV of data though apparently it does not delete items not yet reverse synced to iTunes. If it buggers up contact iTunes store support.
AC -
I am unable to delete unwanted songs from my wish list. Does anybody else have this problem and/solution. Thanks
I have the same problem, and other people have also posted about it. I assume that there is either a bug with the current version of iTunes and/or that there is a problem at Apple's end
-
Created a song in Garageband 11.04 but now it won't open. When I try to open the song, I get a message that I need to get the latest Garageband. Anyone have this problem?
wsmith19 wrote:
Created a song in Garageband 11.04
you're going to have to check the version number again, there is no v11.04, the latest is v6.0.5 -
The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?
It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.
-
What do I do if I can't upload photos into my photobook? Every time that I try, the upload starts but then stops. Then the only options I have are to cancel or retry. Has anyone else had this problem and how have they solved it?
I solved the problem. Had nothing to do with Mac or iphoto. Problem must be my the internet connection to my provider.
Upload at my office worked without any problem. One problem solved, now i am aware with a lot of discussions with my providers helpdesk ;-) -
Call taking forever to load when I answer, anyone have this problem?
When I receive a phone call, I push the green button to accept the call and normally it would go into the active call screen which shows the buttons: mute, keypad, speaker etc. but lately it takes forever to switch to that screen. It'll stay on the caller id screen for like 10 sec. and finally switch to the active call screen, anyone have this issue? How do I fix?
Thanksto be honest these are the solutions that may or may not work..
first thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo
if that doesn't work I would restore from backup and if that doesn't work I would restore as new if all else fails take it to your closest apple store they may replace the phone for a working one.. -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again.
Maybe you are looking for
-
Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube
Hi Experts, I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction). This kind of virtualcube is auto generated by BPC. When I do some kind of selection I obtain this
-
Hi, We have an issue with our Java JDK 1.4.2 Keystore. It will not display a newly certified Certfor Tomcat. OS/Tomcat/Java On Windows 2003 Std R2 SP2. Using Tomcat 4.1.31 - JDK 1.4.2. Tomcat/Java References: http://tomcat.apache.org/tomcat-4.1-doc/s
-
Please tell me table that stores texts in Sales Orders
To everyone, Does anybody know which table stores text in sales orders(VA01 screen -> item data -> under texts tab)? I would like to create a query or ABAP report to check data entered in the text field but I don't think it is in VBAK or VBAP. Thank
-
Bug in newsstand in ios7: unable to pinch to close?
If I'm in Newstand, there's no way for me to exit out of the screen where I select from a magazine or newspaper. Because the newsstand takes up the entire screen, there's nowhere for me to press to minimize out of newsstand. Also, the pinch gesture d
-
Writing an RSS widget in Dashcode.
Hello, I am writing an RSS widget in dashcode. Normally, I know its a very simple task. However, I need to make the RSS URL editable within the widget itself. I have changed the setFeedSource(attributes.FeedURL) to setFeedSource(textfield.value) It s