I can no longer connect to my tiscali/talk talk emails since upgrading to 5.0 how can i sort this?
Since I upgraded to Firefox 5.0 I can still log into my tiscali emails but cant open the inbox. Help!
You need to go to "options/options" then click on the "advence/general" and disable the option : "use hardware acceleration when available".
Here is the link I found for the solution:
http://www.trishtech.com/internet/disable_hardware_acceleration_in_firefox_4.php
Similar Messages
-
i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?
Doubtful - why did the Remote app lose connection?
-
Ive updated to iOS6 and can no longer use bluetooth. I've been advised to go back to iOS5, how can I achieve this?
There is no legit way at all to go back.
-
Realtek 8111D adapter can no longer connect at gigabit speed to WRT610N after firmware upgrade
Ever since I flashed to the newest firmware, the Realtek 8111D adapter on my Gigabyte X58 Motherboard can no longer connect at 1 gig to the router. There is a connection detected in the OS but I wasn't able to get into the config at 192.168.1.1 or use the internet. Finally, after two days of messing around, I got things to work again by limiting the network adapter to 100 MBPs. Is this most likely a bug with the firmware or is it something else? Is there any way to flash back to the original firmware?
Its not the problem with the Firmware. When you update the firmware on your router, you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...After this try to see if your computer is working on 1gig speed.
-
Since updating Firefox every time I click on something another site (v. dodgy looking) opens and I can no longer log in to secure (bank etc.) sites, what has happened and how do I cure it? It's reached the point where I no longer use Firefox.
Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.
-
My iphone 4s is dictating everything. I can't scroll through the phone. I have to double click on everything. How do I turn this off?
With Voice Over, you highlight whatever you are trying to select and then double tap anywhere on the screen to select.
So for your password of 1234 you have to
"Highlight 1, then double tap the screen, Highlight 2, the double tap the screen,... etc."
In order to remove you have 2 options:
Option# 1 – Turn off Voice Over
Go to setting by, highlight "SETTING
Double tap screen to go into settings
Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
Double tap screen to go into general
Use 3 fingers to (swipe) scroll of down and then highlight “ACCESSIBILITY”
Double tap screen to go into accessibility
Once you are in make sure that EVERYTHING in that section are shown as “OFF”
Option #2 - Reset your Phone
Go to setting by, highlight "SETTING
Double tap screen to go into settings
Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
Double tap screen to go into general
Use 3 fingers to (swipe) scroll of down and then highlight “RESET”
Double tap screen to go into reset
Select “Reset all setting” and continue to follow the instruction
(When you reset, all of your data and music WILL NOT erase. So don’t worry about that)
Hope this helps.
- Hugo -
My macbook pro (13inch mid 20101) is running very slowly since I upgraded to Yosemite. How can I cure this or how can I remove Yosemite?
OS X 10.10.1
2.4 GHz Intel Core 2 duo
4GB 1067 MHz DDR3
NVIDIA GeForce 320M 256MB
Opening apps or web pages is incredibly slow and extremely frustrating.Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
My old hotmail account which has my old Apple ID (which is still connected to my phone) has been locked out. I have forgot the password to my original Apple ID and a recovery cannot be sent to my old account due to me not being locked out (believe someone has hacked it). I have set up a new Apple ID with a seperate e mail adress, however I cannot use the App Store because of my phone only recognizing the original e-mail I can no longer acess. Please help.
Contact the Apple account security team for your country and ask for assistance resetting the password: Apple ID: Contacting Apple for help with Apple ID account security.
-
Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
The airco system gives an error:
Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
Advanced info: ssl_error_no_cypher_overlap
The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/ -
For some reason, Facebook is the only site I cannot reach when logged in as Admin. When I switch to Guest then I can access Facebook. I've cleared DNS cache. I've reset Safari, etc. Something is real wierd. Any ideas?
I would try posting this in the right forum your in the ipad forum right now
-
No links from external programs will open - this is usually kind of ok since I can cut and paste, but some links from databases don't provide copy-able links, meaning I cannot access information via Firefox.
Hi BladedxRayne,
You should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved].
Hopefully this helps! -
After upgrade to 10.7.1 users can no longer connect to shares
Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus -
Can no longer connect to certain shares after upgrading to 10.8.4
After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
JonNo NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages. -
Can no longer connect to my network and 'forget network' option has disappeared??
Can no longer connect to my network and "forget network" option has disappeared??? (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.
JEM24 , your suggestion is included in:
- iOS: Troubleshooting Wi-Fi networks and connections
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
JEM24 wrote:
Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers. -
following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?
Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)
Maybe you are looking for
-
Losing some Login Items after upgrading to 10.6.7
I'm pretty sure this wasn't happening until after the 10.6.7 update (I installed the Combo version). When I restart, several (actually most) of my Login Items are gone from my Login item list. I went through the process of restoring them all, and the
-
Video Dissappears when I refresh assest
This has happened several times and I am wondering if anyone else has had a similar experience and may know a solution. When I create a project in DVDSP and then go back to make a revision to the video, I re-compress the files with the same name. DVD
-
Hi, I tried to burn a DVD-DL last night on my new MacBook Pro, and got an error message that said (something like) Laser Power Not Calibrated. I tried Zapping pram, resetting power admin, resetting permissions, ran disk warrior, created a new account
-
For xmas I got a nano and set it up on my computer at home. Now that I'm back at school, can I hook it up to my computer here without losing all of the songs on it from my home computer? Any help would be much appreciated
-
Camera Raw update 2.2 -- unsupported file formats
As many user have posted here, after installing the latest Raw update from apple aperture and and all other core services became unable to read my Nikon D100 images. The file seemed fine since all other apps not based on core services worked fine. Af