I can no longer connect to the internet via Airport Extreme.  HELP!

Over the weekend my Macbook told me that my Airport extreme firmware needed to be updated, so I did that, now I have no internet connection from the Airport. I have no problem connecting to the Airport itself, but I have no actual internet connection. The connection is fine when I plug an ethernet cable directly into the computer.
I really hope someone can help with this!

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

Similar Messages

  • Can no longer connect to the internet with the 580...

    Hi, my PC was able to connect to the internet with my 5800 via a USB cable.  Now, I can no longer connect to the internet with the 5800 via a USB cable. 
    I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that.  Strangely, it works.  
    My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
    Sorry, if my sentences are confusing.  I have a terrible headache at the moment.  While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health. 
    BTW, my PC is on Windows 7 Professional at the moment.  I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work.  I've also tried using PC suite instead of the Ovi Suite but that didn't work either.  What other options do I have, beside hard resetting the phone?  Thanks in advance.        
    Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection". 
    Solved!
    Go to Solution.

    Hi,
    I am so  much tierd by trying to connect my phone to pc.
    I have nokia 5800,and I used to connect my phone to PC by USB cable.
    But from last 5 days I could not able to connect it.
    The problem is that,
    when I connect phone to pc,notification comes up that phone connected via ovi suit,but within  a minute or 2,
    "porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
    Please help me in this asap.
    I had tried following already:
    1.format my PC
    2.Installed new ovi suit
    now please give me a proper solution on that.
    thank you.

  • How do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    how do i wipe my old phone if it can no longer connect to the internet? I enter my passcode and apple id, but 'verification fails' as there is no internet connection???

    Hi, JTCW33. 
    Thank you for visiting Apple Support Communities. 
    If you still have possession of the iPhone you wish to wipe, here are a couple articles that will walk you through the process. 
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If you no longer have access to your device, it will need to be connected to the Internet in order to remote wipe the device. 
    iCloud: Erase your device
    http://support.apple.com/kb/ph2701
    Cheers,
    Jason H. 

  • How can I deauthorize a computer that can no longer connect to the internet or is no longer working ?

    How can I deauthorize Itunes on a computer that can no longer connect to the internet or is no longer working ?

    You can't, which shouldn't be a problem unless you have 4 other computers authorized with the iTunes account and you need to authorize another.
    Once you have authorized 5 computers, you can de-authorize all computere from a computer that is currently authorized followed re-authorizing the current active computers that need to be authorized.

  • WRT54G ver. 6 can no longer connect to the internet after reset

    I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

    Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
    if not Easy Link connect didnt work then you need to do the configuration manually.
    1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
    2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
    3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
    4. access router. open IE, then type in http://192.168.1.1 on address bar.
    5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
    6. power cycle devices again. try to go online
    note: if you dont have latest firmware. try updating if needed
    Message Edited by whodas on 11-07-200601:28 PM
    it is EVIL enough for GOOD men do NOTHING.

  • IMac Can No Longer Connect to the Internet

    My parents use a 2006 Intel Core Duo iMac (the 17", 1.83GHz model) running OS 10.6 (Snow Leopard). They typically connect to the internet using a wireless network set up using an Airport Extreme with RCN as their ISP.
    As of yesterday, the computer can no longer connect to the internet, while all other computers in the house, both Mac and PC, still can. I've tried power cycling the modem and the router, connecting using ethernet, and connecting the computer directly into the modem. Thus far, none of these attempts have succeeded. I've taken a look at the network settings for the computer and while networking is most certainly my thing I wasn't able to detect a change. As a last ditch attempt I tried using Google's public DNS service, rather than RCN's default, but that made no difference, so I've reverted it.
    I realize that the information available in this thread is almost certainly too little to guess at what the problem might be, but I'm more than happy to fetch information that might be helpful in finding a solution.
    Thanks for taking the time to read the problem; hopefully there's an obvious solution.

    JJ247 wrote:  I typically say a restore would correct any software issues but your drive is dead.
    "Drive is dead????" what in this thread gives you that idea? What card might be failing?
    Agent: do you have any Input Managers (might be called Input Methods) either in the Home Folder/Library or in the HD/Library (not /System/Library.)
    Yes, do try another Account and test for this there.
    I know you've already tried Google DNS, but try OpenDNS
    You don't need to go to the OpenDNS site to use OpenDNS. Simply open Network>Advanced>DNS in Sys Prefs and enter the following numbers for the interface you use, e.g. Airport or Ethernet,
    208.67.222.222
    208.67.220.220
    Hit OK and then Apply. Make sure those numbers are entered above any others you may have there.
    To check to see if it's working
    http://www.opendns.com/welcome/

  • Why can't I no longer connect to the Internet via my AirPort Extreme Base?

    I suddenly can no longer connect to the Internet through my AirPort Extreme. Everything was fine until this morning. My Base Station is connected to a DSL modem and then my computer connects to the Internet wirelessly through the Base Station. The center light is on in the Base Station. The left light flickers telling me there is wireless activity. I can still access my printer through the Base Station. But the right light is no longer flickering. I have rebooted everything several times. Does anyone have insight into this problem. This is the second time this has happened. For over a month I could not access the Internet through the Base Station, and then suddenly and arbitrarily it started working again. This morning it just stopped again.

    I've had the same problem - mine started after I upgraded to 10.4.8 on my MacBook a week or so ago.
    I can see other networks around my home and when I travel, but can only connect via ethernet cable (and my ISP is comcast - I thought the upgrade was supposed to help make connecting with comcast better).
    My G3 has no problem connecting, so I don't think it's exactly a problem with my modem, or base station, or even comcast. I think it has something to do with my base station and upgrading to 10.4.8. Btw, dropping back to 10.4.6 hasn't helped.

  • Thinkpad Twist s230u: Can no Longer Connect to the Internet

    Hello,
    Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
    Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
    Any sort of help or ideas would be greatly appreciated! Thank you so much!
    Sincerely,
    Ingrid

    I just started to have similar problem. I cannot connect to interent via ethernet or wifi. Both connections show I am connected, but cannot acces any web pages. It is like it is not connected. I would like to know how to restore back to when I bought it, 12/20/13, and then re-load the Windows 8 pro that is somewhere on the partition HD. Any help out there?????? All my other devices/laptops/computers work fine on the internet.
    Stadtusquo
    ingschan wrote:
    Hello,
    Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
    Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
    Any sort of help or ideas would be greatly appreciated! Thank you so much!
    Sincerely,
    Ingrid
    ingschan wrote:
    Hello,
    Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
    Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
    Any sort of help or ideas would be greatly appreciated! Thank you so much!
    Sincerely,
    Ingrid

  • I can no longer connect to the internet from any other device.

    Having successfully upgraded to OS X Mavericks from Snow Leopard I can now no longer connect to the internet from  any other device.  I have an iPhone 4S, a Galaxy Tab, and an internet radio, none of which can connect to the internet since the upgrade.  They connect to my BT Home Hub without a hitch, it’s just that they do not connect at all to any website.  All was fine before the update. 
    The upgrade was to my iMac and that’s fine, no connection or surfing issues. 

    Hi t0ad1e,
    The article below may be able to help you troubleshoot your Wi-Fi issue with the iPhone:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • Help, I cannot connect to the internet via airport with either my Imac or I-Pad.  Connecting via ethernet works okay for Imac.  I can connect wirelesssly with my windows laptop.  I have reset my router, created a new network. It was all okay on Monday

    Normally I have my IMac, I-Pad and Windows Laptop all working on my home network via wi-fi. This week I find that I cannot access the inetrnet on my IMac or I-pad via wi-fi but I can connect to the internet via wi-fi with my windows based laptop.
    The airport diagnostics (reds/yellows) indcate that I am connected
    I can access the internet if I plug my IMac into the router via an ethernet cable
    I have restarted the IMac and the I-Pad, rebooted the router and created a new network.  None of these changes has made a difference.  Does anyone have any ideas please?

    You have not completed your profile so we cannot assist you. In  your profile you will indicate critical information such as what version of OS X is installed on your computer and the computer's configuration. If you do not know how to complete your profile please click Profile Update

  • Why can't i connect to the internet using airport

    I can't connect to the internet using Airport. I have to use a ethernet connection.

    go to applications>utilities, and make sure your wireless is showing up in the left colum. If you see it there follow the promps to set it up

  • 10.6.8 some devices can no longer connect to the Internet

    I have a home network with two MacBook Pros (let's call them MBP1 and MBP2), two iPod Touch, and an Airport Extreme connected to a cable modem. All networking and Internet access have been working flawlessly.
    Then we updated both MBPs to 10.6.8. Now, out of the four devices, only MBP1 can still connect to the Internet. MBP2 and the two iPods can see the wireless network, but can't connect to the Internet.
    We tried a variety of things suggested in other message threads on MBP2: install the 10.6.8 combo update, fix permissions, trash preference files, to no avail. We reset the Airport to factory settings and set it up again. We ran Disk Warrior on MBP2. We have exhausted everything in our bag of tricks.
    Anyone else experience something like this?
    Is 10.6.8 a red herring, and is this due to something else?
    Help!

    Linc... I followed your advice and started looking elsewhere for the problem. I remembered one thing that was different on my laptop: some time ago, I switched my DNS settings to use Open DNS.
    So I checked the DNS settings in the other laptop and the iPods, switched the DNS setting to Open DNS, and everything works like a charm.
    Thanks for pointing me in the right direction!

  • I can no longer connect to the internet on my laptop using my personal hotspot. Stopped working all of a sudden. Any tips as to why?

    I used to always use my personal hotspot and connect to the internet on my laptop. Then one day it stopped working. I updated my phone so my hotspot password changed, so I changed that in the properties. It now says it's connected to my iPhone and there's internet access, but when I try to do anything it says not connected.

    It shows a connection. When using wifi n USB. I don't know how to connect using Bluetooth seeing what it says to do is totally different from my computer.
    I do have a connection but I can only connect to some sites, I tried YouTube n nfl.com n they both worked but google, hotmail n Facebook said couldn't connect.
    I tried using safari on my computer n like explorer I could only connect to a few different websites.

  • Can no longer connect to the internet on my hp pavilion hpe h8-1360t cto desktop.

    I recently purchased and setup an HP Pavilion HPE h8-1360t CTO desktop computer with Windows 7.
    I have a broadband connection and am able to connect to my wireless network and internet with other computers.
    About 3 days ago I loaded Blue Coat K9 web protection and have not been able to connect to the internet since.
    I removed K9 and rebooted, but I still can't connect.
    I moved the ethernet cable to my old computer, which has K9 on it and I connect to the internet just fine.
    Thanks in advance for your help.

    Hi
    Please find the link given below might help you to resolve your issue.
    Resolving Broadband Internet Connection Problems
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Can no longer connect to the internet...

    I got my Macbook about 2 years ago and since then, I have been able to connect to the wireless network in my house and various other locations just fine. Yesterday, I took my laptop to school, connected to the wifi there, browsed the web a bit and then went home. When I got home, I opened safari and it told me that it could not load the webpage because my computer "is not connected to the internet". I have tried to restore my connection, but all my attempts have failed. I "forgot" the network and reconnected, used network diagnostics (which basically told me the same thing as safari), and the only way I have been able to connect is through an ethernet cable attached directly to the wifi box. We have several other devices in the house (PC, Mac, Ipad, 2 iphones) which have all been able to connect just fine. Any ideas on what I should do?

    Welcome to Apple Discussions!
    Assuming other machines can connect to the internet wirelessly in the house, and it can't connect wirelessly in the house and outside, that says something is either wrong with the airport driver, preferences, or the card got loose. The machine is too young to have a dying CMOS battery. So to test the former, clone your hard drive twice, and erase and install the operating system that came with the MacBook. Setup the wireless network with a non-altered operating system and see if it will connect. If it does not, then your airport card somehow got loose and needs to be reseated, or replaced. This is not a user installable part. So if it is under warranty, bring it in. Otherwise look at http://www.ifixit.com/ if you want to fix it yourself, or look at these repair shops which may be cheaper than Apple:
    http://www.dttservice.com/
    http://www.powerbookresq.com/
    http://www.microdocusa.com/
    http://www.macspecialist.com/
    http://www.techrestore.com/
    If an erase and install works, then carefully bring over data which will not affect your airport connection from your backup. Use this tip:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Here's how to clone backup your system*
    http://www.macmaps.com/backup.html
    - * Links to my pages may give me compensation.

Maybe you are looking for

  • *CANT START UP, HELP!*

    hello, i bought my shuffle yesterday and im still not started up. when i try to install the ipod cd that came with the pod it comes up with the message of 'ipod does not recognise drive please update with windows 2000 sp4 or windows xp' but im on a b

  • Error creating RTP in version 11.

    This is the error that I am getting while creating a RTP in calculation manager in EPMA. Oracle EPM System Workspace - ErrorError :Error while executing query: 'insert into CALCMGRVARIABLES (ID, NAME, UPPERNAME, DESCRIPTION, OWNER, CREATED, MODIFIEDB

  • Need to update task info

    Hi, In my application I need to update task custom attributes. please suggest me. my task has 5 message attributes 1. Actual_completion_date 2. jobassignmentType 3. MatrixID 4. OffierID now my task has been created with these inputs. and I want to up

  • MS Office (Excel) Toolkit - trouble formatting cells

    I have the MS Office toolkit 1.1 and LabVIEW 7.0. I am using 'Excel easy table' to write arrays of strings (number strings and titles, etc.) to a spreadsheet but I also want to control the number of decimal places and the number format. I want to use

  • I just can't update!

    I have down loaded more than 150 apps so far which more than fills my home screens even if i just have the essentials but the worst thing is it won't let me update my apps! I think this is because iPhone needs a new space for each download before it