I can no longer log into my online banking website and have tried all of the suggested Firefox fixes apart from resetting Firefox, any other suggestions?
When I try to enter my customer number to log into my online banking website, an error message reads:
This form has been re-submitted. Re-enter your customer number and submit only once.
When I called the bank to find out if they could help they said it was a browser issue and suggested I should use IE or Chrome (No thanks!).
I have gone through all of the Firefox suggested troubleshooting fixes including deleting the cookie files. I have not yet tried resetting Firefox as I was hoping for a simpler solution before taking this step.
Thanks for any help you may be able to offer.
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Similar Messages
-
When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....
See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.
-
unable to get a network
MMaybe it is defective or your phone isnt registered right. Did you contacted the provider virgin? it uses cdma network.
-
HT5012 Why can't I log onto my online banking after updating my software
Why can't I log into my online banking after updating my software on iphone5 and ipad
In this case you would have to add this account in "Settings > Mail, Contacts, Calendars > iCloud" for email, calendars, contacts, reminders etc. After you have finished checking emails, etc. you can delete your account in the same way.
-
i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.
Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
After recent OS update (10.8.2) I can no longer log into icloud.
After recent OS update (10.8.2) I can no longer log into icloud. I've reset password, but when I try to login on the icloud preferences panel it gives a little "bonk" sound and then spins forever. Open to suggestion. Thanks!
Signing out and signing back in seemed to do the trick as suggested here: https://discussions.apple.com/message/19827058#19827058
-
I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?
You can update your AppleID info here: Manage your Apple ID
Also check this page for more details about iTunes: Apple - Support - iTunes -
Installed SAP Master and can no longer log into old xIEP portal
Hello there,
I am very new to SAP so please bear with me. We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct. I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
However at the end of the installation, I clicked on start and it began to install SAP Master. Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of. Please tell me that this isn't true, and that somehow I can get access to our old portal. Any suggestions would be greatly appreciated. Thank you.You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
After I installed OS X Mountain Lion system, I can't use my Safari to log into my online banking and some other websites which require passwords. Can some one please help?
It could be browser incompatibility or something else. When you say you can't log in, what happens? Is the bank website generating an error saying you're not using a supported browser? Does the login form for your bank account display as usual, but once you submit the form to log in it doesn't work? Give me a specific step-by-step of what you're doing, such as...
1. I load bankofamerica.com
2. I type in my login
3. When I submit, the page does nothing
Obviously that may not be your issue, but giving us details like that will help us come to a quicker conclusion. -
My IMac is so slow after having to do a hard restart. I have BitDefender 2011 for Mac and it was running a scan when I tried logging into my online banking. At the same time, I accidentally hit "update" on the Bitdefender icon to update the latest virus and malware definitions. Now my iMac is slow and useless. I have iOS5 and the latest Snow Leopard. Help please!
Before we get too far, please clarify this part:
I have a 2009 iMac 4,1
A 2009 iMac cannot be an iMac 4,1; they are 9,1 and higher. Did you mean to type "2006?" That would be an iMac 4,1. We need to pin down the model issue before proceeding.
It could be the drive, not the disk, that is dirty. Try a drive cleaning disk, usually about US$5-15 at home entertainment, electronics stores and office superstores -
Since updating Firefox every time I click on something another site (v. dodgy looking) opens and I can no longer log in to secure (bank etc.) sites, what has happened and how do I cure it? It's reached the point where I no longer use Firefox.
Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.
-
Because I can no longer open Adobe files, and have tried all obvious solutions, I've been told to defrag the Intel portion of my MacBook Pro. How do I do this?
I never use the Intel side, and have never partitioned the MacBook Pro.
Message was edited by: MacGirl221bI never use the Intel side,
Not understood, Intel make the processor that runs your Mac, there is no other 'side' to your Mac.
What Adobe application are you trying to open files with? -
Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?
when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN -
HT201412 I have tried all of the above and still can't get my ipad to respond
I have tried all of the above and still can't get my ipad to respond
Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues. -
How do I fix a cd that did not download correctly. I have tried all of the above fixes, but the songs either stop halfway through, or won't play at all.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
Maybe you are looking for
-
Internal dvd drive no longer plays idvd burned projects
My internal dvd drive has been acting strange lately. It will play mass produced dvds but does not play my idvd projects, which it used to do. Anyone know if cleaning will help? If so, can you recommend a cleaner for an imac dvd drive? If cleaning wo
-
Routine does not get its value from: quantity* net price
Dear all, I have a problem with routine. Could you suggest me any solution for it. If quantity =1 there is no problem. But if quantity different than 1 routine still calculates as quantity 1. What migh be problem here? I have routine as:xkwert = xwor
-
How to create a delivery for Sales Order
Hi, I am in process of creating a delivery(T-Code: VL01N). for the Sales Order. in one of the Fields it is Asking for ORDER. i am not sure what details to pass here. as i already created a sales order any body tell me where can i get this ORDER detai
-
Someone's Q10 wouldn't come up. Thinking it's a battery issue, on getting home he put on a spare battery. It still wont come on. Hours later its still not coming on. He tried reloading the software using BB Link without success. The solution was to l
-
Does anyone know what on earth possessed the designers at Apple to come up with the Magsafe 2 connector on their new power adapters? There has been a trend for Apple connectors to become smaller over time, but the Magsafe 2 has bucked this trend and