I can no longer see my iphone on my computer. the ipone is gone blank only showing the apple logo
my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?
Your iphone is shown at the top of the page.
You can also simply click View>Show Sidebar and it will look about the same as it did before.
Similar Messages
-
After the latest itunes update I can no longer see my iPhone listed on the left column. How can I get to the section where I can pick & choose apps etc to be synced?
Also I had to get a new iPhone & so I backed up the night before to the cloud & my computer. When I tried to restore from back up with the new phone my back up wasn't there - shouldn't it be automatic via wifi from the cloud?
What am I doing wrong?Your iphone is shown at the top of the page.
You can also simply click View>Show Sidebar and it will look about the same as it did before. -
Can no longer see projects in library viewer in imovie ’08 and need to find a different apple editing program
I had approximately 15 projects that I can no longer see in imovie. I have read almost every thread on this community for imovie regarding error messages associated with looking for clips. In each case I have rebuilt the project. However, today I continually received a message to search for a .dv file. I have located the file and even changed the .dv file to .mov file and yet none of my projects will appear. I have rebooted, deleted the plist and nothing works.
I was planning on buying a new Mac in 2014 with new editing, and use my old Mac as a backup for imovie files. Very frustrated that I can’t work with any projects now! I se the files in my Movies/imovies/iprojects folder but they don’t appear in the viewer.
Does anyone have a suggestion on how to get back my projects into the viewer? Or, can someone recommend a basic program compatible with imovie 08 that I can use to import my exiting projects into?No, Wasn't sure if I could continue to upgrade to 9.0.9 since my Mac is relatively old.
Just don't understand why I have to keep starting a project over and over again. As I type this, the imovie icon is jumping and asking for "clip 135-02-05-05;27:15" cannot be found. Without this file, the movie cannot play properly." I have located this clip and pointed imovie to the clip, and nothing happens. I even try to locate the corresponding clip in the event viewer but it is not there.
Today is the first time I have not been able to see my projects in the viewer. -
I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?
Tim is correct.
But, first step with 3GS white screen and most iPhone problems is Reset, hold both home and power buttons until iPhone begins to restart itself, usually about 10 seconds of holding both buttons. If still white screen.
Next step would be Restore the iPhone Firmware with iTunes on your computer. If still white screen.
Next step would be to follow Tim's advice, if you had not already. -
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!
Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
after i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.
Try a reset by pressing and holding the home and power buttons for 15-20 seconds.
If it still does not boot up properly, put the device in DFU mode (google it) and restore. -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
Windows XP can no longer "see" my iPhone as a camera/imaging device
can't sync photos from iPhone to computer; Windows XP doesn't even see it as a camera or imaging device. Weird, since iTunes is able to synch music/contacts.
No matter how I check, Windows XP can't find the device:
control panel --> scanners and cameras - nothing!
My Computer --> devices with removable storage - no iPhone
Computer Management--> Device Manager - no iPhone or scanner/cameraUPDATE - I think I've resolved my problem and that it is related to having my iPhone "passcode locked".
1. I connected it and unlocked the iPhone, synced music, but had the problems I noted in my original discussion post
2. I disconnected the iPhone, closed iTunes, reopened iTunes and reconnected the iPhone (making sure it was NOT passcode locked before connecting it) -- everything works fine.
3. now I can get back to my original issue, was to figure out how to get only my NEW iPhone captured photos to synch, or at least have them date ordered. But that's a subject for another post.
BOTTOM LINE - passcode lock may be the key for those who are having problems with their PC not able to see the iPhone as a camera/imaging device -
Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)
From this support document http://support.apple.com/kb/TS3694 see this:
Unknown Error containing "0xE" when restoring
To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets. -
After my last itunes update there is no longer a button in the tool bar for me to view what is on my ipod. I can see screens that allow me to sync but I can't see any of the content, which means I can't add or delete anything without doing a full sync. I have always had my ipod set to manually manage my music because I don't want my entire library on my ipod (I also don't think it would fit). I don't want to have to restore my ipod as I have spent a lot of time setting up playlists that I use for work that aren't in my main library. What happened to the "on this ipod" button that was in the tool bar a week and a half ago? Is there a new route to get to view my ipod content? I have spent a lot of time trying to figure this out and now I'm just getting angry. I buy apple products because they are supposed to be straight forward and easy to use... is this changing?
Go to the View menu and turn on the Status Bar. If you don't see the menus, go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards. -
please help
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I connect my iphone 4 to the itune. It asked me to download a new update for my phone. After I downloaded the update, the itune no longer able to detect my iphone through the USB. My phone is un-responsive showing the plug into the itune icon only on the screen. Please help.
http://support.apple.com/kb/HT1808
-
After I updated to 10.7.2, iTunes can no longer see my iPhone.
It won't charge either. I've used another cable & another iPhone without sucess. Both iPhones and both cables work fine on my work Mac. I'm at a loss. Help!
see > 10.7.4 lost RAW format: Apple Support Communities
plus others just to your right in "More Like This"
Maybe you are looking for
-
Spry Slideshow works in Firefox/Safari but not in Explorer
I'm still unable to get my slideshow to work. It works fine in Safari and Firefox, but nothing shows up in Explorer. Does anyone have any ideas or maybe another reputable source for a different slideshow widget? www.epaaudio.com
-
Can't delete specific e-mails??
I received un-solicited e-mail(s) without any text and when I try to delete them it immediately takes me back to desk top If I have deleted several B4 that none get deleted??
-
System.speech.synthesis implementation in web applications
When I press the button, the voice is successfully saved in the directory given and works perfectly when i play it but the problem is the page in the website after the click is always waiting for localhost. Is it a problem with the code, or with the
-
Hi all, We have a requirement to change VAT registration no. to allow 12 character length (instead of current 11). Belgium changed their VAT # system in 2005. i changed confing via path: SPRO > IMG>General settings>Set countries>Set country-specific
-
Blotchy image in Lightroom and Photoshop/difficulty waking from sleep
I am suddenly having problems with my 15" 2.4ghz MacBook Pro. There are two problems actually, the first is that I am not looking at gradient colours when I open an image in Photoshop or view it in Lightroom. The image looks blotchy, almost as if I h