I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
Similar Messages
-
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?
I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?
-
iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but prEntry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?
I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH -
Just installed the latest version of Mozilla Firefox and now can't get into Firefox due to the following error message, The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsglite3.dll.
Just installed the latest version of Mozilla Firefox and now can't get into Firefox due to the following error message, The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsglite3.dll.
-
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
I received a message that an update of QuickTime was available. I decided to update. When I re-started my computer, a shrill noise (error noise) occurred and a message popped up in a box: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Does anyone know what this means and how to correct it? PLEASE!
Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
I can't get iTunes to install/start on my HP laptop. When I start/install the current version, I get the following error "The procedure entry point "JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll". Why isn't this dll included in the distribution? What do I do to get iTunes to install on my 64-bit AMD HP laptop.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.
Maybe you are looking for
-
I have an Ipad 2 and have about 20 apps that will not update, How can I delete these?
I have some apps that will not update on my IPad 2. They say they are installing, but Installing is grey..not black, and they have been like this for several weeks. I cannot find out how to finish the updates or delete them. Can someone suggest a
-
Hello, I am new to this whole Mac experience and am quite pleased so far but i do have a question about iCal and the way it's month view shows events. I frequently have events that span multiple days, i.e. begin at 3am on the 3rd and end at 11pm on t
-
How does one double-space in Mail? If copy double-spaced text and paste in Mail email, it comes out as single spaced.
-
Hi All, I need help on one requirement in SSIS 2012, Please let me know for any suggestions or solution. I have two XML files having different structure, I have to manipulate data by applying XSLT and creating single output xml. (Which needs to pass
-
I am using Elements 9 on a Acer Aspire 5742 lap top running Windows 7 home premium. When inserting my memory card from my Nikon D90 It only shows the standard dialog and not the advanced button. On my desk top machine the adavanced button is visible