I can not access the home page

I have installed Oracle Portal 3.0 EA on a Windows NT 4.0 Workstation
running Oracle 8.1.6.
And now I can not access the home page and login from a local browser installed on the server by typing http://<hostname>/pls/portal30/portal30.home.
Apache is still working.

Jan-Peter,
Obviously the browser recognizes the servername:port because your sample works. It must have a problem with the pls or DAD.
Can you access:
http://servername:80/pls/admin_/gateway.htm
If yes,
Then check to make sure you are calling the correct DAD and they are setup. You can do this through the gateway.htm page.
If no,
Then your 9iAS did not setup mod_plsql correctly. Check oracle_admin to see if it points to plsql.conf
null

Similar Messages

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I can not access the welcome page

    After i installed oracle application server soa suite 10.1.3.1.0 ( soa_windows_x86_101310_disk1) successfully . I want to access the welcome page of oracle application server control
    by going all programs -->oracle(instance name)--> oracle application server control
    It said Page can not be displayed
    then i went to c:\productz10.1.3.1\OracleAS-1\install\readme.txt to check hostname and port number which is correct (http://localhost:8888/)
    i typed in the browser manually ,but it still showed the page cannot be displayed.
    after that, i was using command prompt to check status of the process
    c:\productz10.1.3.1\OracleAS_1\opmn\bin>opmnctl status
    it showed only OC4JGroup:default group -->process status: alive
    but i could not see the http server process
    and still was trying to start the oracle http server and it seemed useless i did not how can i access the welcome page and access to the application server control
    I need help
    thank you very much

    Which install type did you choose? If you chose Custom, you may not have installed OHS at all...

  • I can't access the home page of my bank. i can;t get into my acct.

    i entered my bank site and it didn't go to the home page where i enter my user name and pw. i downloaded firefox because i couldn't read my messages from my bank on ie.

    Do a malware check with some malware scan programs. You need to scan with all programs because each program detects different malware. Make sure that you update each program to get the latest version of the database before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and Searches are redirected to another site

  • After I updated the iOS version on 11/23/13, I can not access anymore my Pages. It says it's updating. How long would this take to update?

    After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • On my ipad i am receiving a message iCloud backup "i cloud backup can not access the account . review your account in information settings .  the screen goes blank  if i push  the ignore or the settings button. what do i do

    on my ipad i am receiving a message iCloud backup Cloud backup "i cloud backup can not access the account .
    review your account in information settings . the screen goes blank  if i push  the ignore or the settings button.
    what should i do

    Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again

  • I forget the lock code and now I can not access the iphone. What I can do?

    I forget the lock code and now I can not access the iphone. I try to restore it, but ask me to go to iphone settings to which I have no access and I can not download the latest version of iOS to do it.
    Thanks!

    If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034
    If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod),  however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
    http://support.apple.com/kb/HT5818
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I can not access the program

    Suddenly I can not access the keynote &amp; pages &amp; number (program)

    did you try a hard reboot? Hold down the sleep button until the slider appears and slide to shut down. restart with the power button.
    Jason

  • I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?

    I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?
    The app is not found at all in my computer

    If you’ve deleted or damaged the Safari application, you don’t have a backup, and you don’t have another web browser, proceed as follows.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Copy or drag — do not type — the line below into the Terminal window:
    open /Library/Application\ Support/Apple/.SafariArchive.tar.gz
    Press return. The Archive Utility application will launch and run briefly. When it exits, enter the following line in the Terminal window the same way as above:
    sudo cp -R Downloads/.SafariArchive/Applications/Safari.app /Applications/
    Select the whole line by triple-clicking it, then copy or drag it to the Terminal window. Press return. This time you’ll be prompted for your login password, which won’t be displayed when you enter it.
    There should be no output from the above command. If that’s the case, launch Disk Utility, select the boot volume and run “Repair Permissions” (not “Repair Disk.”) This is one of the few times there’s a reason to do that.
    Next, two more commands in Terminal:
    chmod -R -N Downloads/.SafariArchive
    rm -r !$
    Those are two separate lines; press return after each one. You can then quit Terminal.
    Test Safari. If it works, you’re done. If not, you did some other damage to your system and need to reinstall.

  • Can not access the Instance Data of a Singleton class from MBean

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • TS1398 I have connected my iPad 2 to my Mac Air over blue tooth.  Booth say they are connected to each other.  But I can not access the internet on the IPAD.  I can connect over blue tooth from my iPhone to my iPad with no issue.  Any thoughts?  Thank you

    I am trying to connect my Ipad 2 to my Mac Air over bluetooth.
    I can connect them to each other, and both machines say they are connected over bluetooth.
    However I can not access the internet on the Ipad...says it is not connected to the internet.
    Does anyone know if you can fix this?
    THank you

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

    About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... " I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

    Your profile indicates your Mac is running v10.7.2
    If that is correct, updating your system software may help.
    Click Software Update from the Apple menu.
    Restart your Mac after updates are installed then try the App Store.
    If you can't update that way, there's a workaround.
    Install the OS X Lion Update 10.7.5 (Client Combo)
    Then restart your Mac and try the App Store.
    messaged edited by:  cs

  • I can not access the app from itunes

    Hi, can someone help me solve this problem?
    I have an iPhone 4 with iOS 7.0.3 with iTunes 11.1.2 and when I want my iPhone to sync from iTunes can not access the iTunes app tab I close iTunes without possibility of doing something.
    this only happens to me with the iPhone, I have also an iPad 2 and it works ok.

    Hi tankard77,
    Thanks for visiting Apple Support Communities.
    If iTunes is quitting unexpectedly when you try to sync your iPhone, start with the troubleshooting information in this article:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best Regards,
    Jeremy

Maybe you are looking for