I can not drag clips into timeline with adobe premiere CC

I can not drag clips into timeline with adobe premiere CC, I created a sequence and still does not work

See if this works... 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153

Similar Messages

Can't drag clips into timeline (newbie warning)

I'm sure that this has been discussed previously on this board, but I couldn't find a post.
Back to my problem: All of a sudden, the current project that I'm working on will not let me drag clips into the timeline. The clips turn to a "lite" color of gray and freeze. I'm brand new to this so a uncondescending response would be greatly appreciated.

Hi larget2 - this being a very friendly board, it is most unlikely that you will be scorned! We've all sought and been given willing help here from time to time.
Some more details might be of help in solving your problem:
How big is your project, and how much storage space do you have?
What is the source of your clips?
Is this your first project, or have you successfully completed others?
How far into the project were you before the problem began?
Is your project stored on your start-up disk, or on an external drive?
try repairing permissions (Applications>Utilities>Disk Utility), and with iMovie closed down, trash this file: Users(you)>Library>Preferences>com.apple.imovie.plist.

Can`t left click and drag clip into timeline..Need advice

Can`t left click and drag clip into timeline, or drag clips around in timeline.
Can insert into timeline from Source Window but can't drag from source window.
Can cut and paste within timeline.
Restarting cs5 doesn`t help, but restarting computer solves problem for a while.
Tried many mouses, but that didn`t help.
Have no idea how I got the name OLD PRO, must have been drinking champagne years ago, because I am a bumbler par excellence!
Message was edited by: old pro

Thank you so much for asking
In the Project Panel a left click highlights the asset but ignores the drag.
In the timeline, a left click highlights the panel and when I try to drag it gives a flicker but that's all.
I can cut and paste in the timeline.
A restart of CS5 has no effect. Restarting the computer solves the problem for a while.
Four different mouses--same problem.
Doug

Can't drag clip into movie

I have a library of clips. I've created projects before. I create a new project. I try to drag a clip into the new movie. It fails. The little clip icon just snaps back to the original location of the clip. I try other clips. Same thing.
Something has changed iMovie such that I can't create a new project and drag clips into it.

My bad. Error was between the chair and the keyboard. I was trying to drag whole clips rather than selections of frames.

I can't drag clips into my timeline - HELP!

I am working on a project at the moment and I am having issues with dragging imported clips into my timeline. I click on them to drag them down but they go grey and stay put! What is going on, can anyone help me as this is quite an urgent project.

What happens if you drag them to the clips viewer instead of the timeline? (Click on the small film frame next to the small clock at lower left before you drag.)

Can't drag transitions into timeline

Hi, I am trying to drag dissolves into the timeline but they won't take. Can anyone help?

markyj2000 wrote:
Though i think it's a shame, because I film quite tightly so often only have the amount of clip that I need.
You don't really loose much if anything. You only need to move the in on one and the out on the next 15 frames for a one second transition. Plus the 30 frames are not gone, they are part of the transition and can be seen, depending on the type of transition.

Can't drag video into timeline premiere cc

Been working with PP CC since it came out and have had almost no problems. Now I have a head scratcher. I can't drag a video clip from the project panel to the sequence. The audio comes but the video won't. All I get is the close hand with a line through it when I hover over any of the video tracks. The clips play fine in the source monitor but still cant drag it from source to sequence either. Tried this with clips from several projects and cameras but no go. Started a new project, different name, folder and footage, still have the problem.
[Text formatting corrected.]
Message was edited by: Jim Simon

Heaven sent. Had the same problem and just about lost my sanity over it.
Thanks Chaps!

Can't move clips into Timeline

I've just installed Premiere CC onto my macbook pro
I can see the clips in the projeckt window When i importing my project but i can`t get it it from there to the timeline
How can I get this to work properly?
Thanks!
Changed title to be more descriptive. Message was edited by: Kevin Monahan

thank you for your help. it was just the problem.
keld

Can not drag songs into new playlist

itunes issue, Unable to drag songs into new playlist folder.
New itunes 10.4
has not worked since I installed Lion
Macpro 2.66 GHZ Quad-Core xeon

Probably something very simple and might be quicker answered if posted in one of the iTunes forums?
https://discussions.apple.com/community/itunes
Regards,
Colin R.

Crashing when dragging clips into source box! "Premiere Pro has encountered an error."

Hi, I just installed the CS5 Premiere Pro software trial version and it keeps on crashing when I drag my imported clips into the source box?
It says:
Premiere Pro has encountered an error.
Does anyone know why this is happening? Please help b/c I would like to use this program for a project due Monday. Thank you so much!

@ Andrey V.: I tried that but it did not work. I still get the same error message. =(
@ Jeremy D.: It's "protected MPEG-4 movie"

The form can not be saved if open with adobe reader

Hi all,
I create a registration form using Adobe LiveCycle Designer 8.0.1291 then I Save As both into static and dynamic
Then when I'm open the registration form file using Adobe Reader 9 then there's message appearing says "Please Fill it up this following form . You CAN NOT save data Type into this document bla.. bla.. "
My question is why if I open it with acrobat then the form able to be saved but it can not be saved if I open with adobe reader ?
Need suggestion for this matter
Thanks

You need to Reader Extend the form to work with Adobe Reader..
Open the same file in Adobe Acrobat and goto Advanced Menu -> Extend Features in Adobe Reader and save the file..
Thanks
Srini

PrE 10 freezes when dragging clips into timeline

Computer stats: Windows7, 64-bit, Intel i5-450M (Dual Core) 2.4 GHz, 4 GB RAM, 325+ GB free on hard drive
As soon as I drag-n-drop media into the timeline, PrE 10 instantly freezes. I can Add Media to the edit window without problem. I wait for all processing to stop, and then as soon as I drag just one clip to the timeline, PrE 10 freezes. I tried different clips - including just short ones - with the same results. I was using an external hard drive, but I copied the clips over to my computer's hard drive to see if that made a difference (the NTFS vs FAT32 discussion) ... no change; same problem even when adding the media directly from my computer's hard drive.
I appear to be having this problem with video shot from my Canon S95, but not my Canon T3i. The S95 shoots video at 1280x720, 23.976 fps and uses the .MOV wrapper. I have tried using both the project settings for AVCHD 720p, 23.976 fps and the DSLR project setting for 720p / 23.976 fps. GSpot read the CODEC as the AVCHD / 23.976fps, so I assumed that project setting would have worked. I checked for any PrE 10 updates as well as QuickTime updates - all good.
As a comparison, my T3i shoots video at 1940x1080 at 30fps, and I used the DSLR project setting that matched those #'s -- had absolutely no problem with dragging media to the timeline and editing. Worked great.
I went through this FAQ and didn't find anything of note:
http://forums.adobe.com/thread/792580?tstart=0
Thanks,
Judd Baker

>Intel i5-450M
Is that a laptop?
If yes, and IF that laptop has dual graphics, read on...
Dual video laptop problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
If not a laptop, more information needed
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Can not drag clips from events to a project

Help!
I create an event and import videos. I then select the section of videos I want (yellow box) and drag into a project.
Nothing happens the clip is not put into my project.
If i do the same but instead of trying to drag I push E the clips move into my project but do not show in the preview screen. The preview plays the videos in the events, the projects area has apparently become redundant.
I have completely removed and re-installed imovie. Reimported new movies to test (from iphone) with no luck. Repaired permissions in disk utility. Problem still there!
There are other threads with this problem but they seem pretty old, with no solution that has worked for me so thought it was best to start my own. I have a stack of footage waiting to be edited and really need to get this sorted quickly so any help, from anyone would be much appreciated.
iMovie11 | Mountain Lion | imac
Processor 2 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2400 XT 128 MB
Software OS X 10.8.1 (12B19)

Then I'm at a loss. See if You find help in this.
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Can't drag effects into timeline in Fcp

Hello, so I just installed final cut studio 2 and am used to being able to drag effects (like dissolves and such) into the timeline right from the effects window. Final Cut is not letting me do this. Also I have this weird problem where I can't see anything i put on the timeline in the canvas. I can hear it when I play the timeline and I can look at the files in the viewer (they are quicktime) but not on the canvas. Occasionally I can see one fram and when the project is un-rendered and the red bar shows up above the timeline I can drag through and watch some of it. But never when playing. Weird dilemma. Anyone know what to do?
Thanks in advance.

here's the settings: 640 x 480 ntsc 4:3, pixel aspect ratio: square, anamorphic not checked, field dominance none, editing timebase: 29.97, compressor: motion JPEG A, quality 100%
video processing: render in 8-bit YUV
I'm doing everything as i've always done with regard to transistions.. it just won't let me drag them in to the timeline.. this goes for everything under the effects tab: such as video generators: text and things like that. I appreciate your help.

Can't drag photos into timeline

I opened a new project with the widescreen setting and can't load photos onto the timeline. They act like they are loading, show up as a blip on the timeline, then disappear. The same photos work on a standard non widescreen project, but not here. Audio imports fine. Any ideas?

markyj2000 wrote:
Though i think it's a shame, because I film quite tightly so often only have the amount of clip that I need.
You don't really loose much if anything. You only need to move the in on one and the out on the next 15 frames for a one second transition. Plus the 30 frames are not gone, they are part of the transition and can be seen, depending on the type of transition.

I can not drag clips into timeline with adobe premiere CC

Similar Messages

Maybe you are looking for