I can not find (see) the Data Control Accordion

Hello all,
I cannot find (see) the Data Control Accordion, I just installed the Jdeveloper 11g (Oracle JDeveloper 11g (11.1.1.2.0) - November 2009) from this link http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html
I started a new ADF BC application, but I cannot find the data control accordion to drag and drop the components I created in the application model. Is there anything I must do after installation (post installation), is there any libraries need to be installed? Please, I need a help to create my application, I’m totally stuck, many thanks for any help.
Kind regards,
Nabil

Shay Shmeltzer wrote:
Can you post an image of your screen so we can see how it looks like?
If you delete the JDeveloper\system11.1.1.2.36.55.36 directory - does your IDE get back to the right way of displaying the data control?Hello,
Many thanks for your reply, kindly find attached screenshots for the two installation of Jdeveloper 11g I have (release 1 & 2), it shows clearly that the “Data Control” is available for release 1, but not available for release 2, even we are talking about the same application!
Regarding the “JDeveloper\system11.1.1.2.36.55.36”, I’m not sure if I have it (attached a list of directories installed), I was not able to find it under my installation directory, therefore I can’t answer your question, but please advise if it could be the reason, how I may have it, do you think there is something wrong with the installation? I noticed that some persons having the same problem before me, so what was wrong, and how they solve it? I appreciate any help please, many thanks.
Regards,
Nabil
P.S. regarding the attached files, sorry I don't know how to attach files to my reply (you may email me at [email protected] so I can send you the screenshots through email, if you please), any help regarding that too will be appreciated.
Directory     Location
o.adf-faces-query-and-lov-dt.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfdt.swingcore.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfm.11.1.1.2.36.55.36
o.adfm.11.1.1.2.36.55.36
o.BC4J.11.1.1.2.36.55.36
o.bm.11.1.1.2.36.55.36
o.css.11.1.1.2.36.55.36
o.diagram.javadoc.11.1.1.2.36.55.36
o.dynamic.faces.11.1.1.2.36.55.36
o.ide.11.1.1.2.36.55.36
o.j2ee.11.1.1.2.36.55.36
o.jdeveloper.11.1.1.2.36.55.36
o.jdeveloper.esdk.11.1.1.2.36.55.36
o.struts.11.1.1.2.36.55.36
o.struts.adf.11.1.1.2.36.55.36
o.xsqldt-ide.11.1.1.2.36.55.36

Similar Messages

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

Why can't I see the data in the spreadsheet ?

why can't I see the data in the spreadsheet file in Which I wrote my output data? I set the format of write to spreadsheet file to be %.11f. Though I can see only colums of zeros, I can plot out the data.

I tried th "%.11f" format and it worked in the attached VI (6.1). Please respond and attach a small example VI that demonstrates your problem.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect
Attachments:
array_test.vi ‏15 KB

Can we find out the date/time when the datafile last extended?

Hello all,
Can we find out the date/time when the datafile last extended?
Is it possible to find out from the alert.log file?
Correct me if I am worng?
Thanks in advance
Himanshu

In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
Thanks
Himanshu

Why can not I see the name of a child process?

Hi,
I implemented a program for my project.
My program has two processes. One is a parent process. Another is a child process.
The parent process forks its child process. The child process is executed by execl() system call.
The program code implemented is followed.
=== abbreviation ===
switch(itmr_forkid = fork()) {
case 0:
RCode = execl("./itmr", "itmr", (char *) 0);
exit(0);
break;
=== abbreviation ===
I executed the program. And then I pressed "ps -ef" on command line.
[stp1ggsn1][user/shlim] ps -ef
UID PID PPID C STIME TTY TIME CMD
root 29402 29376 38 Mar 06 pts/0 11376:36 ibgfb
root 29403 29402 0 Mar 06 pts/0 0:15
However, why can not I see itmr process name for the child process?
When I executed the program for the parent process and the program for the child process respectively, I can see itmr process name for the child process.
I tried to look for the cause. But I could not find out the answer.
Please, give me your answer. Thank you for your answer in advance.

Hi,
I am sorry that I loaded my question two times by mistake.

Can not find Flush Return Data Buffer.vi

When I try to start my Labview program I get a "Error -70025 occurred at Read Home Input Status.vi" because the Return Data Buffer is not empty.
I searched for the Flush Return Data Buffer.vi in the Labview library but it is not there.
Where can I find it?

Hello Mishka,
The Flush Return Data Buffer.vi should be located in your functions palette at Vision and Motion>>73xx>>Advanced>>Flush RDB.vi. Alternatively, you can press ctrl+space on your keyboard to open the quick drop menu and then search for Flush RDB.vi.
Regards,
J_Bou

Why can not I see the process deployed to the server in workspace?

As captioned, After I deploy the BPM project to server, why cannot i see it in the workspace?

It can be because the user that you are using for log-in to Workspace is not mapped to the Initiator role for ur process.
Check the role mapping for your process either by going to BPM Workspace --> Administration --> Organization --> Roles
OR
OEM --> Application Deployments --> Right Click on any application --> Security --> Application Roles --> BPMProcessRolesApp
HTH...

Can I find out the date that a video was taken?

I am wanting to put all my videos from my iphone of my daughters first years onto a DVD, I would like to mark the dates for each one. How do I find out what the dates of each video or picture are?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

How can I find out the date of manufacture for any particular iPod?

I suppose the Subject Title says it all really!
Someone told me that there was a website that list codes but I cannot find it anywhere.
Any advice would be greatly appreciated.

http://www.chipmunk.nl/klantenservice/applemodel.html

HT1414 How can i find out the last time my iphone was restored?

Hey, i need help on how to find out when the last few times my iphone was restored.
Thanks

This is a strange question, not sure where you are going with this one. On the computer you Restored with, iTunes requests to back up the iPhone. These are time stamped and stored on the computer. You can use iTunes to search the list of back ups of your iPhone and see the dates, so you can at least see the dates of the back ups.

IPhone 5 I can not find facetime

I Bought in Saudi Arabia iPhone 5 and I can not find facetime the mobile Model ( md663ae ) And I did not find it in the settings

Maybe the FT app or s/w part was omitted from the iPhones sold in SaudiArabia when you purchased them.
But,
I have an iPhone5 bought in the US.
Currently I am in Saudi Arabia and I use FaceTime everyday to talk to my girlfriend.
In India I found that FT does not work when on 3G, it works only over WiFi.
But to my delight, in Saudi Arabia FT works on 3G as well.
Then, a month ago, I bought a new iPhone5 for my friend in India.
FT was available on the phone and we used it in India.
As I did not open the box in SaudiArabia, I am not sure if FT on the phone I purchased in Riayadh works in Riyadh.
Iam pretty sure that FT work on phones being sold in Riyadh now-a-days.

[SOLVED] JDeveloper 11g Data Controls Accordion Missing

Hello all, this is my first post in the forums. I am following the JDeveloper 11g tutorial found here:
http://www.oracle.com/technology/obe/obe11jdev/11/rich_client/adfrichclient.htm
However, once I get to the section "ADF Table Component and ADF Binding" step 2 tells me to open my Data Control Accordion in the Application Navigator, which I cannot find. In JDeveloper 10g you could easily open it via View | Data Control Palette (if I am not mistaken).
Inside the Application Navigator the only accordions I see are, "Projects", "Application Resources", and "Recently Opened Files". Also note that I am using the "Default Role" schema.
Message was edited by:
kabronkline

Shay I apologize for the mistake, I think your link is incorrect; however, I've found the correct forum at:
JDeveloper and OC4J 11g Technology Preview
You were right about this problem, I had initially started JDeveloper 11g in "Java EE" role. Eventually I changed it to "Default" role on my own via Tools | Preferences | Roles - this apparently is what caused my problem.
Being on a *nix machine I followed your instructions and ran the following command:
<jdev_home>/jdev/bin/jdev -su
I was prompted for role selection and user migration and it gave me a fresh start. I can now see my Data Controls Accordion. Big thanks!

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

I can not find (see) the Data Control Accordion

Similar Messages

Maybe you are looking for