I can not get any volume on the ringing tone when somebody is ringing me can you help

I can get any volume on my ring tone when people are phoning me can you help.

Hello, Martin Stuart. 
Thank you for visiting Apple Support Communities. 
I would recommend making sure the vibrate switch is not engaged.  If the ringer switch is set to audible alert, try the steps in the second article below. 
iPhone: Ringtones
http://support.apple.com/kb/ta38610
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jason H. 

Similar Messages

  • On my Iphone 4, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. help?

    On my Iphone 4s, I can not get any response accept the apple logo after recharging for an entire day and trying to connect to iTunes. A few days before that the speaker suddenly stopped working during a call. I also reset everything by connecting to itunes but no luck then. help?

    Hey there xntricj,
    It sounds like you are putting a password for your Apple ID that works without issue on your iPad into your iPhone but get a message saying that the password is incorrect. I recommend the steps from the article named:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    After completing iOS 7 setup, go to Settings > iCloud.
    Scroll down and tap Delete Account, then enter your previous Apple ID and password.
    If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I can not get any volume at all from my hp pavillion dv6 notebook pc.

    I have done nothing differently? Any suggestions? It isnt on mute and I have checked the volume in the control panel.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58001-58500/sp5822​6.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

    I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

    1. Check the Side Switch
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
    2. Double-click the Home button and swipe to the right and check volume control
    http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
    3. Settings>Notification>Game Center>Sound>ON
    http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

  • TS1702 I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any furthe

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

  • Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Sign out of the iCloud control panel and then back in.

  • TS1398 bought a mini and also have an IPAD2  have used ITunes to download all programs to the mini but have NOT BEEN ABLE TO have the connection to the Internet and CAN NOT get any emails. I NEED HELP!!!!!!!

    I thought when I bought a MINI that all I'd need to do is sync up with ITunes to get all apps and setting to the Mini. I was wrong as I can not connnect to the internet and can not get any emails. Have tried just about all suggestions under support  but need to reach out to actual users who may have run into similar prblem. I must be missing something as I have to believe that Apple would make it as simple/easy as possible to connect to the interne. I still have my internet connect with my Ipad2.
    appreciate any help on this one as MY WIFE is driving me crazy as she wants to use the internet with HER MINI!!!
    Thx  Wayne

    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • HT1338 I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

    I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

    So what happens when you boot it up? What do you get?

  • HT1725 I can not get any app to finish loading from the app store.  Anyone else having this problem

    I can not get any app to finish loading from the app store.  Anyone else having this problem?

    Why has nothing been done on this? I still have this problem today on Chrome and on the latest OSX.

  • TS3274 I can't get any volume on my I Pad.

    I can't get any volume on my I Pad.   My grandson used it to play games yesterday.  Today it makes no noise

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • HT1386 I have a brand new Iphone 5, I use Itunes 10.7 I can not get any music on my Iphone,

    I have a new Iphone 5
    Add a new music cd to the library and then sync music
    Also tried manual
    TRied on several computers for some hours and evenings
    Can not get any music on my Iphone at all
    Sometimes I get informed that after copy some are not copied as they have the wrong formet
    Also tried with a new CD
    No fault during sync, but no music

    Good.
    Three things come to mind:
    1.  I think you're implying when you travel away from your home to a more populated area, the cellular coverage improves and your iPhone works well.  Is that right?
    2.  Do you have a case or some other obstruction over or near your iPhone's antenna?  Have you tried moving or removing any possible obstructions near the antenna?
    3.  AT&T has a (free) app in the App Store called "Mark the Spot".  You can use this app to report voice and/or data issues to AT&T, as well as keep up on progress they may be making in improving coverage in your area.  Your trouble reports are geotagged (if you wish).

  • I can not get sound out of the HDMI output on my mac mini. happened before after unpluging headphone and had to change some hrz number.

    I have had this problem before. I just cant remember how I fixed it. I am not getting any sound from the HDMI output. Everything is selected properly and volumes are set correctly. Last time I had to change a megahrz thing and thats where I am stumped.

    Mac HD/Applications/Utiltiies/Audio MIDI Setup
    441000 or 48000 Hz for Format

  • My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • I can't get any widgets onto the Desktop in Lion (10.7.2) even with devmode on. Any ideas anyone?

    So, new on the forum.
    The problem is, that My sister baught a new iMac 27" with Lion preinstalled and we then updated it to 10.7.2.
    Then she wanted the world clock from dashboard to desktop to stay and we found instructions how to do it with dashboard devmode made on in terminal.
    But.. it just doesn't work.
    We just can't get any widget onto the desktop not for a short time, not for stay.
    Does anyone any ideas.
    The third party software is not what we are looking dfor..
    In the meantime, my mom baught a new iMac 21,5" with Lion and updated it to 10.7.2.
    On this machine the widget instructions work fine!
    What can be the difference between these two?

    The Class.forName method throws a class not found exception, so ...as the compiler has told you ...you need to catch it or otherwise handle it.
    It "must be caught, or declared to be thrown".
    try {
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    }catch (ClassNotFoundException cnfe) {
      System.out.println(cnfe.toString());
    }Here, I have 'caught' it.

  • Where can i get any information about the application of labview on remote control??

    Where can i get any information about the application of labview on remote control??for example using labview to build a virtual laboratory.

    This is a big question. Contact me directly and we can discuss in detail what you are trying to accomplish.
    Mike...
    [email protected]
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for

  • Non ascii characters being sent from a parameter in a form

    Hi! I have seen many topics posted on passing non ascii characters through parameters from one servlet to another and converting them into whatever format is necessary. However, I have not seen anyone answer the following question. I have a jsp page

  • QTs rendered in Flash don't work in FC

    None of the QTs that I exported from flash with 25fps work in FC 6. Depending on the codec I used they all come out different lengths, and they are all listed as 10fps in the FC browser. Any ideas? Thanks a lot.

  • Unable to edit ReadItem and ReadList operations on one specific external content type

    I'm experiencing a strange behavior.  Here is the scenario: - In Sharepoint Designer I create external content type A that uses external system X - I define ReadItem and ReadList operations for this external content type - I then create external cont

  • AS 3.0 and Components

    So I read the FlashBrighton Flash CS3 tutorial on how to make components using Actionscript 3.0. It worked insofar as I learned how to make the component and bring it into Flash. Let me correct that: I follow his steps to do it, not that I entirely u

  • Webservice deployment in Oracle e-Business Suite

    Oracle e-Business Suite R12 contains Oracle AS 10.1.3.0. My question is: Is it possible to deploy webservices build in JDeveloper to this application server version? Iam not talking about BPEL, just a custom build webservice or a webservice generated