I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

Similar Messages

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
There are ways to do this however, try searching Google for: Installing Logic 8 under Lion or Mountain Lion.

Mac not recognizing AP Express after AP Extreme password change...

I have an Airport Extreme Base Station and a Airport Express as an extender. I went on Airport Utility and changed my wireless password. Since then my macbook pro is unable to recognize my Airport Express and the yellow light is flashing on the unit itself. I am still connected to the internet through the Extreme Base Station but am no longer picking up the express's signal and there is no output. Any suggestions? Very frustrating

Welcome to the discussion area.
I suggest that you temporarily, move the AirPort Express close to your computer and connect an ethernet cable from your computer to the AirPort Express to see if AirPort Utility can communicate to the Express that way.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
You will need to enter the same wireless network password that you gave to the AirPort Extreme so the Express will be able to join the wireless network.
Click Update to save your changes and move the Express back to the desired location.

Airport Utility will not display any base stations.

I just had a new hard drive installed in my two year old MAC, since the last one crashed and have Mavericks installed. I have tried to un-install the application so I can re-intall a new one but the system will not let me. I am running a 5th generation of Airport Extreme which by forcing the back methoed of pulling the airport and continualiy doing a hard factory reset on the device, we have determained that the application Airport Utility for Mavericks is defective but there is no patch or update available; how do i get the application to show my base station so I can monitor who is conected to my internet.

I'm not interested in ascribing blame either but waiting for Apple to fix something that isn't broken will only divert attention from seeking the problem's underlying cause. Assuming the AirPort Utility app on your Mac remains unaltered, it's exactly the same one everyone else is using. Should there be any doubt about that, reinstalling OS X will obviate any concern.
I suggest the following for you to consider as you deem appropriate.
Apple's Wireless Diagnostics may supply some additional helpful information.
To use it, hold an option key while you click your Mac's Wi-Fi icon, and choose Open Wireless Diagnostics...
The following authentication dialog will appear:
Authenticate with your Admin password, then click the Continue button in the following:
The network analysis and diagnostic tests will take several minutes to complete:
When it completes, if your wireless network is functioning properly the following will result:
If something is amiss, supposedly the results will be different and you will be presented with helpful information.
Assuming your connection is "working as expected" select Continue to summary and click Continue:
Ignore the pre-populated text field, which is provided as a place for you to type in additional information should Apple ask for it in the course of obtaining technical assistance from them. Apple has no way of knowing where your router is located in your home, and certainly doesn't know if you even have an upstairs bedroom closet.
Click Continue.
The next step will also take a few minutes:
When it finishes, you will be presented with a summary that may or may not be useful to you. Let me know if it is.
The WirelessDiagnostics-xxx.tar.gz file deposited on your Desktop can be dragged to the Trash, or you may wish expand it and examine its contents. It's up to you.

HT4759 I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"

I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"

Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

On my new ipod touch 5g is imovie ,iphoto not installed or free on the appstore while apple says that it is normally installed on the new ipod touches what can I do?

On my new ipod touch 5g is imovie ,iphoto not installed or free on the appstore while apple says that it is normally installed on the new ipod touches what can I do?

The do not cme preinstaled but can be purchased at no cost if you meet these requirements
GarageBand is free on the App Store for all iOS 7 compatible devices; additional GarageBand instruments and sounds are available with an in-app purchase. iPhoto, iMovie, Pages, Numbers, and Keynote are free on the App Store for qualifying iOS 7 compatible devices activated on or after September 1, 2013. See www.apple.com/ios/whats-new/ for iOS 7 compatible devices. Downloading apps requires an Apple ID.
copied from http://www.apple.com/ipod-touch/specs.html
Just go to the App Store and find the apps. They should say free . Just tap to install

2 medical softwares often can't open pdf, just after the adobe reader install but IExplorer succeded

Hello,
We have two softwares ( medical application) which open pdf via adobe reader XI.
Theses softwares often can't open pdf, just after the adobe reader install( using adobeArCleaner+Customisation Wizard XI).
At this point Internet Explorer is ok to open pdf with adobe reader...
We have to launch manually adobe reader once on the computer to make the two applications to manage openning pdf
Launching adobe reader seems to finish the installation...
Did the editors have to put an "option" when they open pdf ( to act like Internet Explorer...) ?
Thanks

I am very glad to have a so rapid answered!
Sorry I was not precise...
When the file should open,
for one application an error is happening,
for the other application which is a "web" application, an other window ( not "web") opens with adobe reader and the pdf document ( the expected behavior is to open adobe reader and the pdf file in the web window already opened)
I think that the file association is ok, if we double clik on a pdf, adobe reader is opening and then the file is opening in adobe reader window...
If I open Internet Explorer and I search for a pdf on the web, It is openning in the same window web.
But something seems not finish for the medical softwares...

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?

Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

HT201407 Per the "Completing Authorized iPhone Unlock" instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate.

Received an authorized unlock code from apple/AT&T for my off-contract 3GS (8GB). Per the “Completing Authorized iPhone Unlock” instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate saying “Your iPhone cannot be activated because the activation server is temporarily unavailable”. I tried this again and again for countless times, no way! I have my old AT&T simcard and other carrier’s simcard. Both will not help. Please help me to activate and start using my phone.

Hello,
I got like the same problem, last days I get message to restore my iPhone, so I did it yesterday and it work very well. In the afternoon I saw that at top in the left corner show invaild sim card or so (only knew the german version). so I restore it again but now it won`t activate after I enter SIM-PIN and it accept it, it shows "No Service".
Anybody can help? My Carrier is o2 Germany.
Thanks!

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you :)

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you

If you factory reset, it wont make the update go away, but you should back up and reset before you install the update.

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

Marco,
is your main system language set to English? If not, change the language to English in the "Language&Region" System Preferences (see: Re: I bought Aperture in a box et can't upgrade from 3.4.5 to 3.5.). Then sign back into AppStore and reload the Updates panel.
Other things that could prevent the update are, if you moved Aperture from the Applications folder or renamed it. Then put it back.
Léonie

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

Similar Messages

Maybe you are looking for