I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?

It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security.

Similar Messages

  • My iphone 5 does not turn on anymore.  when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

    My iphone 5 does not turn on anymore.  when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

    from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

  • Using an apple extreme with an apple express as a wired bridge for roaming. Thinking of adding a wireless express to extend network.

    Hi
    I have an Apple extreme AC installed with an Apple Express N setup as a bridge through ethernet to extend my network. Im thinking of adding another express to a location that has no ethernet.
    All I should need to do is set the extreme for "extend my Network" and setup the express that way as well?
    Thanks!

    You should not have to make any changes at all on the AirPort Extreme.
    Temporarily, locate the new Express near the AirPort Extreme and power it up for a few minutes
    On the iPad....
    Tap Settings on the home screen
    Tap WiFi
    Look for a listing of Setup a new AirPort Base Station
    Tap on AirPort Express
    The setup utility will take a minute to analyze things, then announce that the Express will be configured to extend the AirPort Extreme network
    Enter a device name that you want use for the Express and tap Next
    Wait a minute while things are set up for you, then tap Done when you see the Setup Complete message.
    Now move the Express to a location that is about half way between the AirPort Extreme and the area that needs more wireless coverage and power it back up
    Everything above assumes that the AirPort Extreme was set up correctly by 10.6.8.  It would have been better to use the iPad for the setup of the new AirPort Extreme, but what is done is done.

  • HT202213 Apple TV sees my network, says it is connected but I cannot access my "Computers" on apple TV, keeps saying please log in your computer,  any Ideas,  Firewall or something I tried everything I can think of???

    Trying to access my purchases from Itunes but cannot get my computer on the Apple TV, also this all occurred right after last update??? any ideas??

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Trying to install new printer.  can't  password required.. tried everything  how can i restore or restart my computer

    can't install my new printer.  password required.. don't know it my son set up computer and he can't even remember doing a password.  tried tech support. that didn't work.  if you can't help i have to take this computer to geek squad.  help…. can i restart or reset my computer

    Hi-
    Welcome to Discussions!
    the guy says it needs a low level format?
    That's not within the realm of the end user.
    Low level formatting is done at the factory.
    If the drive can't be erased, return it. Something is wrong.

  • HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

    Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I can not sync my Iphone 4s with Itunes.  I get a "required file can not be found" error.  I went the apple stroe yesterday and they said a file may be corrupt.  I have uninstalled and re-installed Itunes so it is up to date.  ANy thoughts?

    I can not sync my Iphone 4s with Itunes.  I get a "required file can not be found" error.  I went the apple stroe yesterday and they said a file may be corrupt.  I have uninstalled and re-installed Itunes so it is up to date.  ANy thoughts?

    Anybody?

  • Can not use default screen saver with this version of Mac OS X

    Hello,
    I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
    Also, the flurry screen saver runs extremely slow.
    Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?

    The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).

  • I can not get my Airport extreme to login to my Drobo exterior HD. Any thoughts?

    I can not get my Airport extreme to login to my Drobo exterior HD.., although it definitely recognizes  it.
    Any thoughts?

    First check to make sure that you have the correct versions of Apple products to do what you want. The AirPort Extreme (AEBS), needs to be the "square" version with rounded corners, not the older round, domed shaped AEBS.
    Next, the AirPort Express (AX) must be the newer "n" version of the product. Check the label on the side of the AX for the model number. This needs to be Model No A 1264.
    Next, using AirPort Utility on your PC, select the AEBS and click Manual Setup. Then click the Wireless tab below the icons. Make sure that a check mark is entered next to "Allow this network to be extended"
    Then check the AX using Manual Setup. Click the Wireless tab to check that the setting for Wireless Mode is "Extend a wireless network" and that there is a check mark next to "Allow wireless clients"
    Reference....Apple Support Document http://support.apple.com/kb/HT4259 for complete step by step instructions.

  • I got this macbook pro last December 25, upon setting it up I did not put any password. Now I want to install an app, it is asking me for a password. How can I give one if I did not set it up? I tried putting my apple ID password but it wont work.

    please. waiting for your replies.

    You should have set up a password. It is important to have one in order to prevent other users from installing applications and to make your Mac safer.
    If you have set up your Apple ID, you can try resetting your user password with your Apple ID > http://support.apple.com/kb/HT1274
    If it does not work, reset your user password through Recovery > http://discussions.apple.com/docs/DOC-4101 Then, set up a different Keychain password > http://support.apple.com/kb/ht1631

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

    I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

    With a new account, you'll need to rebuy the games.
    Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want.  But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
    If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  This only disconnects the device from that account, no data is lost on icloud.  Then enter the account ID that you want to use.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • Can I Re-Associate my iPad with my Apple ID?

    Long story short I had a problem with my Apple ID when re-downloading my music so I contacted iTunes support and they removed my iPad from my Associated devices in my Apple ID, can I Re-Associate my iPad with my Apple ID? I can still download all my stuff without a problem so I'm not sure.

    If you have iTunes Match, use automatic downloads on it, or re-download past purchases then that might associate a device with your account : http://support.apple.com/kb/HT4627 - though I'm not sure what it achieves apart from stopping another account being used on it for 90 days

  • HT204291 After updating software on my Apple TV home sharing will not work. Both Apple TV and iMac have home sharing on but when Computer is selected on Apple TV I just get a message saying "turn home sharing on".  But it is.  How can I solve this problem

    I have just updated the software on my Apple TV since then home sharing will not work though I had not used it since installing iOS6 on my iPad 3.  Home sharing is shown to be on on the Apple TV and on on my iMac.  The Apple TV is connected to the router with an ethernet cable and all functions work correctly apart from my computer.
    I have done the following. 
    Switched off the Apple TV and rebooted, did the same with iMac
    Turned off home sharing then turned it on.
    Checked that home sharing is on on both devices.
    Selected Computer
    Get a message telling me to turn home sharing on - IT IS!
    Tried using airplay mirroring on the iPad but the airplay function is missing from iPad.
    It is so annoying since before iOS6 and updating the Apple TV software everything worked perfectly.  Any help would be very gratefully received.
    Thanks

    Hi Everyone,
    hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
    Here's how to do it:
    1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
    2) Download your ipsw restore file from Apple.
    5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3) In iTunes select yout ATV, hold SHIFT and click on Restore
    4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
    5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
    Enjoy!
    raadore

  • Hp Photosmart 7510 keeps going offline.  Any advice?  Have tried everything I can find online about it but the answers are all dated 2008.  Surely Apple has a way of correcting this by now.  I have IMAC 10.6.8.  It did this with my hp photosmart premium a

    I have tried everything I can find online to correct this.  Nothing works and all I can find online is dated 2008.  Surely Apple has found a cure for this problem by now.  This happened with my hp Photosmart Premium c309a as well.  I thought it was a printer problem but It's happening now with the 7510 that is only a week old.  And please, if you have a cure, don't explain in high tech computer language.  I'm ok with the computer but not that up on high tech stuff.  Thanks.

    It is connected wirelessly.  The other printer was connected with a USB.  Getting it to print again---usually by just turning printer off and back on again.  This usually results in getting 1 page printed.  Then I have to do it again.  I have deleted printer and reinstalled.  I have changed IP from automatic to manual.  I unplugged printer for a short time (1-2 minutes) and plugged back in.  I have restarted both IMAC and printer after each process.  This is really frustrating and time consuming, driving me nuts.

Maybe you are looking for