I can not set up my skype to go number on my accou...

I can not seem to set up my skype to go number on my account.. i had recently .. created another account.. and tried to ad my number from the previous account to the new account.. i says number is already registerdd with another account.. as i deleted the number from the old account.. and tried it again on the new account.. it wont let me complete the steps in setting up my skype to go number to my acount
EDIT : title/message case changed.

amandamarsh wrote:
I can not seem to set up my skype to go number on my account.
Hello,
Please let me have the following information:
1) are you seeing the problem in the client or on the web browser
2) browser (Chrome, IE7, IE8, IE9, Firefox etc)
3) browser version (usually available under Help->About)
4) OS (e.g. Mac, Windows 7 etc)
5) what exact behavior or error message are you seeing (e.g. clicking on the Add but nothing happens, clicking Save but nothing happens, no page loads up, etc)
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

Can I set up a Skype to go number for myself?

Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me? I just learned Skype doesn't have any Canadian numbers. I'm a Skype video conference subscriber. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.

Danberesford wrote:
1. Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me?
2. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.
Hello,
1. Yes this is possible in a limited way. You would need to register each of your family/friends/clients' phones in your Skype To Go program. Only those who are registered could dial your Canadian STG number and have it ring on your Skype or on your phone. You wouldn't be able to give out the number at random because STG will ask for verification if a non-registered phone calls the number.
2. Unfortunately the Online # program can't be introduced in Canada until the Canadian telco authorities issue the necessary licenses.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can not set breakpoints due to missing line number attributes

Hi,
I am using Eclipse 3.0, Jboss to run my Java applications. Till yesterday I could set breakpoints and everything was working fine.
I didn't change any settings but it is not allowing me to set breakpoints anymore.
Error is:
Unable to install breakpoints due to missing line number attributes
I double checked the settings in window->preferences->compiler->classfiles
Add line number to class files is checked.
Is there anything else I can do?
Any help on this would be greatly appreciated.
Thanks
nmadhava

I'm facing the same problem (no line number information) on the following configuration:
Eclipse 3.1.1 SDK with WTP 1.0 feature, Weblogic 7.1, running on weblogic provided JVM: JDK 1.3.1_08
I have already done the following:
1/ Re-checking debug preferences in Eclipse and rebuild all projects in the workspace then redeploy via ANT.
2/ Building via ANT1.6.2 with all javac tasks set to debug="on" and redeploy
Breakpoint is located in code section residing in one of the workspace's projects. But I don't know weather 3rd-party jar resources have been compiled with debug enabled or not; I suppose however it does not matter as I do not try to debug 3rd-party code but ours.
Any suggestion appreciated.
Regards

How can i set up my Skype Number

Can i set up my skype number to be accessible in two skype accounts and if the other skype account is not available it call gets diverted to another skype account?

Note: when I click on South Korea, takes me to a page informs me there are special requirements for South Korean Skype numbers. However, when I click on "Next" to verify I am a resident of Korea, it informs me of technical difficulties. Is any one else getting this error?

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

HT1277 i have set up an email account on my iPad, but i can not set up same account on iMac or iPhone , it keeps saying wrong password for account, any help please

i have set up an email account on my iPad, but i can not set up same account on iMac or iPhone , it keeps saying wrong password for account, any help please

i am trying to use my sky email on imac & iphone 4gs

My microphone does not appear to be working, people can not hear me on Skype.

My microphone does not appear to be working, people can not hear me on Skype. TIA

I have the same problem..-_-

TS2972 My Apple TV 3 can not set time network, since one week from now, before was working perfectly

My Apple TV 3 just stop working, it can not set the time network I have call for support and done everything as requested and still nothing, can somebody help me with This it has pass a week and nothing yet. I even restored as support toll me too, no timé still can be set. HELP PLEASE

I have the exact same problem as KAR1973, and have tried everything. Relatively new latest Gen ATV, worked fine for couple months, then suddenly today will not set network time, will not activate, and only shows the "computer" and "settings" icons on menu screen. Will not allow me to log into AppleID/Itunes account.
Very frustrating. Tried resetting, restoring (on screen and directly connected to Itunes) mutliple times, rebooted router multiple times, even checked the ntp settings in router (get network time shows as "enabled"), tried it all on wireless and ethernet, and still same problem.
Appears many people have same problem based on google searches. My question is what is Apple doing about this?? Am tired of spending hours trying to figure this out, so am putting it away, and will buy a Roku or another competitor's box instead.
Apple needs to do a better job standing by its product, figure out what the problem is, and put out some helpful guidance, particularly for people who don't have advanced computer or network expertise (inculding myself.)

I can not set Yahoo as my default search engine in my Firefox. How can I fix it?

My Firefox's default searc h engine is Google. I have updated my Firefox to 35.0, but still I can not set Yahoo as default search engine.
Please help me to fix this probeblem. I want to use Yahoo for searching.
Thanks,
Munir

Check these out;
Book mark and use this;
'''Download the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home
page.
'''[https://addons.mozilla.org/en-US/firefox/addon/searchthissite/ SearchThisSite]''' {web link}
Allows you to search the website currently viewed with
the website's internal search engine (and not the default
FF search engine or an external engine)
'''[https://addons.mozilla.org/en-US/firefox/addon/add-to-search-bar/ Add to Search Bar]''' {web link}
Make any pages' search functionality available in the Search Bar

I can not set up a firewall for my computer. I can get to the place I'm supposed to get to but am unable to click start.

I can not set up a firewall for my computer. I can get to the place I'm supposed to get to but am unable to click start.

If the Start Firewall button is grey (inactive) check to see if the pad lock is "locked" in the lower left corner of the screen. If so, click it and enter the Administrator password to unlock it. Then you can start the firewall.
Hope this helps.

I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?

The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions

Lightdm - can not set wallpaper and empty shutdown dialog.

hello guys!
i can not set wallpaper in my lightdm-gtk-greeter - screen behind login dialog is still black.
besides when i click on the shutdown button - where are no options at all!
here is my lightdm-gtk-greeter.conf and lightdm.conf:
# logo = Logo file to use, either an image absolute path, or a path relative to the greeter data directory
# background = Background file to use, either an image path or a color (e.g. #772953)
# theme-name = GTK+ theme to use
# icon-theme-name = Icon theme to use
# font-name = Font to use
# cursor-name = Cursor theme to use
# xft-antialias = Whether to antialias Xft fonts (true or false)
# xft-dpi = Resolution for Xft in dots per inch (e.g. 96)
# xft-hintstyle = What degree of hinting to use (hintnone, hintslight, hintmedium, or hintfull)
# xft-rgba = Type of subpixel antialiasing (none, rgb, bgr, vrgb or vbgr)
# show-language-selector (true or false)
[greeter]
logo=/usr/share/icons/hicolor/64x64/devices/archlinux-icon-crystal-64.svg
background=/usr/share/pixmaps/backgroundlfm.png
theme-name=Adwaita
icon-theme-name=mate
font-name=Sans Regular 11
cursor-name=Human
xft-antialias=true
xft-dpi=96
xft-hintstyle=slight
xft-rgba=rgb
show-language-selector=true
# General configuration
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# xsessions-directory = Directory to find X sessions
# remote-sessions-directory = Directory to find remote sessions
# xgreeters-directory = Directory to find X greeters
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#xsessions-directory=/usr/share/xsessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#xgreeters-directory=/usr/share/xgreeters
# Seat defaults
# type = Seat type (xlocal, xremote)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xserver-layout = Layout to pass to X server
# xserver-config = Config file to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# exit-on-failure = True if the daemon should exit if this seat fails
[SeatDefaults]
#type=xlocal
#xserver-command=X
#xserver-layout=
#xserver-config=
#xserver-allow-tcp=false
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
greeter-session=lightdm-gtk-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-guest=true
#guest-session=UNIMPLEMENTED
session-wrapper=/etc/lightdm/xsession
#display-setup-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-session=UNIMPLEMENTED
#pam-service=lightdm-autologin
#exit-on-failure=false
# Seat configuration
# Each seat must start with "Seat:".
# Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.
#[Seat:0]
# XDMCP Server configuration
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
# it can be a word and the first 7 characters are used as the key.
[XDMCPServer]
#enabled=false
#port=177
#key=
# VNC Server configuration
# enabled = True if VNC connections should be allowed
# port = TCP/IP port to listen for connections on
[VNCServer]
#enabled=false
#port=5900
#width=1024
#height=768
#depth=8
any ideas?
upd: here is lightdm.log
[+0.08s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.12s] DEBUG: Starting Light Display Manager 1.4.0, UID=0 PID=504
[+0.12s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.12s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.58s] DEBUG: Registered seat module xlocal
[+0.58s] DEBUG: Registered seat module xremote
[+0.58s] DEBUG: Adding default seat
[+0.58s] DEBUG: Starting seat
[+0.58s] DEBUG: Starting new display for greeter
[+0.58s] DEBUG: Starting local X display
[+3.88s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+3.88s] DEBUG: Using VT 7
[+3.93s] DEBUG: Activating VT 7
[+3.93s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+3.95s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+3.95s] DEBUG: Launching X Server
[+3.95s] DEBUG: Launching process 534: /usr/bin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+3.96s] DEBUG: Waiting for ready signal from X server :0
[+3.97s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+3.97s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+5.56s] DEBUG: Got signal 10 from process 534
[+5.56s] DEBUG: Got signal from X server :0
[+5.56s] DEBUG: Connecting to XServer :0
[+5.58s] DEBUG: Starting greeter
[+5.58s] DEBUG: Started session 558 with service 'lightdm-greeter', username 'lightdm'
[+6.15s] DEBUG: Session 558 authentication complete with return value 0: Success
[+6.15s] DEBUG: Greeter authorized
[+6.15s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+6.18s] DEBUG: Session 558 running command /usr/sbin/lightdm-gtk-greeter
[+7.77s] DEBUG: Greeter connected version=1.4.0
[+7.77s] DEBUG: Greeter connected, display is ready
[+7.77s] DEBUG: New display ready, switching to it
[+7.77s] DEBUG: Activating VT 7
[+16.32s] DEBUG: Greeter start authentication for shohart
[+16.32s] DEBUG: Started session 649 with service 'lightdm', username 'shohart'
[+16.49s] DEBUG: Session 649 got 1 message(s) from PAM
[+16.49s] DEBUG: Prompt greeter with 1 message(s)
[+24.87s] DEBUG: Continue authentication
[+25.00s] DEBUG: Session 649 authentication complete with return value 0: Success
[+25.00s] DEBUG: Authenticate result for user shohart: Success
[+25.01s] DEBUG: User shohart authorized
[+25.01s] DEBUG: Greeter sets language ru_RU.utf8
[+25.02s] DEBUG: Greeter requests session mate
[+25.02s] DEBUG: Using session mate
[+25.02s] DEBUG: Stopping greeter
[+25.02s] DEBUG: Session 558: Sending SIGTERM
[+25.03s] DEBUG: Greeter closed communication channel
[+25.03s] DEBUG: Session 558 exited with return value 0
[+25.03s] DEBUG: Greeter quit
[+25.18s] DEBUG: Dropping privileges to uid 1000
[+25.18s] DEBUG: Calling setresgid
[+25.18s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Restoring privileges
[+25.24s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Calling setresgid
[+25.24s] DEBUG: Dropping privileges to uid 1000
[+25.24s] DEBUG: Calling setresgid
[+25.24s] DEBUG: Calling setresuid
[+25.24s] DEBUG: Writing /home/shohart/.dmrc
[+25.33s] DEBUG: Restoring privileges
[+25.33s] DEBUG: Calling setresuid
[+25.33s] DEBUG: Calling setresgid
[+25.46s] DEBUG: Starting session mate as user shohart
[+25.46s] DEBUG: Session 649 running command /etc/lightdm/xsession mate-session
[+25.51s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+590.03s] DEBUG: Session 649 exited with return value 0
[+590.03s] DEBUG: User session quit
[+590.03s] DEBUG: Stopping display
[+590.03s] DEBUG: Sending signal 15 to process 534
[+590.89s] DEBUG: Process 534 exited with return value 0
[+590.89s] DEBUG: X server stopped
[+590.89s] DEBUG: Removing X server authority /run/lightdm/root/:0
[+590.89s] DEBUG: Releasing VT 7
[+590.89s] DEBUG: Display server stopped
[+590.89s] DEBUG: Display stopped
[+590.89s] DEBUG: Active display stopped, switching to greeter
[+590.89s] DEBUG: Switching to greeter
[+590.89s] DEBUG: Starting new display for greeter
[+590.89s] DEBUG: Starting local X display
[+590.89s] DEBUG: Using VT 7
[+590.89s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+590.89s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+590.89s] DEBUG: Launching X Server
[+590.89s] DEBUG: Launching process 2172: /usr/bin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+590.89s] DEBUG: Waiting for ready signal from X server :0
[+591.33s] DEBUG: Got signal 10 from process 2172
[+591.33s] DEBUG: Got signal from X server :0
[+591.33s] DEBUG: Connecting to XServer :0
[+591.33s] DEBUG: Starting greeter
[+591.33s] DEBUG: Started session 2177 with service 'lightdm-greeter', username 'lightdm'
[+591.35s] DEBUG: Session 2177 authentication complete with return value 0: Success
[+591.35s] DEBUG: Greeter authorized
[+591.35s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+591.35s] DEBUG: Session 2177 running command /usr/sbin/lightdm-gtk-greeter
[+591.41s] DEBUG: Greeter connected version=1.4.0
[+591.41s] DEBUG: Greeter connected, display is ready
[+591.41s] DEBUG: New display ready, switching to it
[+591.41s] DEBUG: Activating VT 7
[+591.41s] DEBUG: Stopping greeter display being switched from
[+591.57s] DEBUG: Greeter start authentication for shohart
[+591.57s] DEBUG: Started session 2197 with service 'lightdm', username 'shohart'
[+591.58s] DEBUG: Session 2197 got 1 message(s) from PAM
[+591.58s] DEBUG: Prompt greeter with 1 message(s)
[+595.21s] DEBUG: Continue authentication
[+595.26s] DEBUG: Session 2197 authentication complete with return value 0: Success
[+595.26s] DEBUG: Authenticate result for user shohart: Success
[+595.26s] DEBUG: User shohart authorized
[+595.26s] DEBUG: Greeter sets language ru_RU.utf8
[+595.27s] DEBUG: Greeter requests session mate
[+595.27s] DEBUG: Using session mate
[+595.27s] DEBUG: Stopping greeter
[+595.27s] DEBUG: Session 2177: Sending SIGTERM
[+595.27s] DEBUG: Greeter closed communication channel
[+595.27s] DEBUG: Session 2177 exited with return value 0
[+595.27s] DEBUG: Greeter quit
[+595.28s] DEBUG: Dropping privileges to uid 1000
[+595.28s] DEBUG: Calling setresgid
[+595.28s] DEBUG: Calling setresuid
[+595.28s] DEBUG: Restoring privileges
[+595.28s] DEBUG: Calling setresuid
[+595.28s] DEBUG: Calling setresgid
[+595.29s] DEBUG: Dropping privileges to uid 1000
[+595.29s] DEBUG: Calling setresgid
[+595.29s] DEBUG: Calling setresuid
[+595.29s] DEBUG: Writing /home/shohart/.dmrc
[+595.38s] DEBUG: Restoring privileges
[+595.38s] DEBUG: Calling setresuid
[+595.38s] DEBUG: Calling setresgid
[+595.55s] DEBUG: Starting session mate as user shohart
[+595.55s] DEBUG: Session 2197 running command /etc/lightdm/xsession mate-session
[+595.57s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1
it seems that lightdm does not even trying to make background.... wierd.
Last edited by shohart (2012-11-15 08:08:09)

I have the same problem... IDK why I have an empty shutdown dialogue. I also have a bunch of non user users appear through it's menu.
It appears the problem has to do with most Arch installs not having consolekit anymore...
https://bbs.archlinux.org/viewtopic.php?id=151799
Last edited by akspecs (2012-11-17 23:59:40)

SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF

We are running SUM 1.0 SP10 on IBM i with V7R1 to put EHP6 and SP's on an ERP 6.0 system. Phase PREP_PRE_CHECK/SCANDIR_EPS0 repeatedly ends with multiple errors that SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF file. We tried increasing the sidADM and R3GROUP authority to the file, but it changes them back and ends with a different number of errors each time, see example:
SAPup> Starting subprocess with PID 4295601 in phase 'SCANDIR_EPS0' at 20140319101619
    ENV: DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/bin:.
    ENV: LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/server:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/jli:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64/jli:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LANG=en_US
    ENV: PASE_LC__FASTMSG=true
    ENV: PASE_LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LOCPATH=/usr/lib/nls/loc
    ENV: PASE_NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/lib/nls/msg/en_US/%N:/usr/lib/nls/msg/en_US/%N.cat
    ENV: PASE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: PASE_STDIO_ISATTY=N
    ENV: PASE_THREAD_ATTACH=Y
    ENV: PASE_TZ=<EST>5<EDT>,M3.2.0,M11.1.0
    ENV: PASE_USRGRP_LIMITED=
    ENV: PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: SAPSYSTEMNAME=Y60
    ENV: dbms_type=db4
    ENV: dbs_db4_schema=R3Y60DATA
    ENV: ILE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_LIBPATH=/usr/sap/Y60/SUM/abap/bin
EXECUTING /usr/sap/Y60/SUM/abap/bin/SAPCAR -flat -R /usr/sap/transD60/EPS/in -xvf /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR
SAPCAR: processing archive /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR (version 2.01)
x CSR0120031469_0080800.PAT
x SIGNATURE.SMF
SAPCAR: can not set permissions for /usr/sap/transD60/EPS/in/SIGNATURE.SMF (error 13). No such file or directory
SAPup> Process with PID 4295601 terminated with status 13 at 20140319101623!
Has anyone lse exprienced this and can share a fix?
Thank you,
-Margie

Hi,
We had the same issue, and in my opinion it is caused by the parallelisation of sapcar during SUM phase PREP_PRE_CHECK/SCANDIR_EPS0
I did see several parallel SAPCAR jobs running during this phase.
So what happens when one job extracts SIGNATURE.SMF at the same time another job tries to finalize its extraction by setting the permissions for /usr/sap/trans/EPS/in/SIGNATURE.SMF?
It can happen that permissions are being set at the same time another sapcar yust deletes this file to begin extracting.
Since we had 146 SAR archives that needed to be extracted, a retry allways ended up in 4 to 12 conflicts.
What did do the trick was adding
/sapcar/extrcact_parallel = 0
to the file
../SUM/abap/bin/SAPup.par
Just as Christoph Langer suggested.
We had to restart the whole phase, a repeat was not enough to solve the problem.

Can not set multicastRelayMarginDuration

hello
i try set the multicastRelayMarginDuration in my p2p application multicast broadcaster
netStream.multicastWindowDuration = 31; // change default for everybody
netStream.multicastPushNeighborLimit = 10; // change default for everybody
netStream.multicastRelayMarginDuration = 5; // change default for everybody
netStream.publish("stream");
netStream.multicastRelayMarginDuration = 5; //test for HD
//netStream.multicastPushNeighborLimit = 10;
//netStream.multicastWindowDuration = 30;
i test with http://osmf.org/dev/1.6gm/setup.html and see the
multicastWindowDuration is set to 31 sec for everybody this works fine
the multicastPushNeighborLimit is alwys 4 i think this is ok because its an security limit set this value to more than 4
but the multicastRelayMarginDuration is alwys 2 sec is this normal? i can not set this value?
best regards

the multicastPushNeighborLimit and multicastRelayMarginDuration are set individually at each member; they are not inherited from the publisher. the defaults are 4 and 2 seconds respectively.
you can override any of the multicast parameters (including the window duration) at each peer. listen for NetStream.MulticastStream.Reset (which signals (re)attachment of a low-level multicast stream) and set/override the ones you want to change each time.
the parameters that are inherited from the publisher (but can still be overridden at each peer) are:
multicastWindowDuration
   multicastAvailabilitySendToAll
   multicastAvailabilityUpdatePeriod
also, if multicastPushNeighborLimit is 0, peers will inherit 0. if the publisher has a non-zero multicastPushNeighborLimit, peers will start with the default of 4.
these parameters are not inherited from the publisher, and have default initial values at each peer:
multicastFetchPeriod
   multicastPushNeighborLimit (see exception/explanation above)
   multicastRelayMarginDuration

Can not set the default printer

Hello,
we have HP LaserJet Pro MFP M125-M126 PCLmS network all in one printer, as the installation in every user was successful, and was working fine on installation day, after a day all user facing issue like can not set default pritner , can not print, all user are facing issue at a time,
prompt reply is appreciated,
This question was solved.
View Solution.

Hi @darshan9 ,
I see that you are experiencing issues setting the default printer for users and you are unable to print over the network.
I would be happy to help you.
Do you mean individual computers setup with the printer over the network users or one computer with multiple users?
Do you have Admin Rights on the computer to make changes?
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
I would suggest you to check if you have a different user account or from an administration account.
I would also suggest you to create a new user account and check if you are able to set the printer as default.
Create a user account. Create a user account.
If you are still having issues run the Fixit Tool. Diagnose and fix printer and printing problems automatically.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I can not set up my skype to go number on my accou...

Similar Messages

Maybe you are looking for