I can play my video clips as events but unable to load them into project this just started

I can play my video clips as events but unable to load them when I drag them to project.

I am using a macbook pro not a mini

Similar Messages

  • HT1338 I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?

    I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I can open my hotmail email but cannot reply or send new messages. this just started last week.

    I can open my hotmail email but cannot reply or send new messages. this just started last week. Don't know why not. Is this a Firefox issue or a Microsoft issue? 'Cause it's near impossible to get Microsoft to get back to me. Hope you can help me.

    I resolved both my problems.  The problems with Walgreens is that my own Frontier internet connection is very slow and will allow only minimal  downloads.  When I used a Verizon Hot Spot to download pictures they downloaded without any problem.  So I am working iwth Frontier to resolve my slow internet speed.  The problem with pictures be syncronized to a gallery was resolved by using the Help column and the pictures were easily deleted by following their instructions. 

  • I can see my Aperture library in FCX, but I cannot import them into Timeline!

    Please Help me understand!
    I am using FCX 10.0.5 and Aperture 3.3.2 on a Macbook Pro 10.7.4 with OS X.
    Last year around november I was able to "drag and drop" video clips and stills from the media browswer into the FCX timeline.
    Now I get this message:
    "None of the selected files or folders can be imported. Change the selection and try again."
    What changed?? What do I do??

    I am having this same issue. I actually like iTunes, but it'd be nice if my music didn't disappear.

  • When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?

    When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?

    The latest is happening with the 12 little video clips sent to me by Apple entitled "Get to know your new iPad"
    They run from 3 to 32 seconds and then "lock-up" on my iMac.
    I don't have photobooth on my iMac
    The link to the Apple promotion is :-
    http://www.apple.com/ca/ipad/guided-tours/?cid=CDM-CA-DM-P0009300-160603-EN&cp=e m-P0009300-160603&sr=em
    D

  • I just purchased this machine ,in i photo i can not play my video clips

    help please
    I just purchased this beautifull machine
    In Iphoto i see that this photo is a video clips but it will not play it it gives cant find a good reference to data....

    Hi Alexander,
    Could you describe your issue in more detail?
    You've imported the contents of your camera into iPhoto, some of which are video clips.  However, when you try to play the video clips, you get an error.  Is that correct?

  • Please help: Why JMF does't play .avi video clip?

    The player doesn't play .avi media file, or plays sound only, but it works fine when palying .mpg files, anything I need to pay attention to when using the following code to generate a player to play video clips?
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import javax.swing.*;
    import javax.media.*;
    public class PlayClip extends JFrame {
    //singliton design pattern
    private static PlayClip instance;
    protected Player player;
    private File file= new File ("goal.avi");
    private PlayClip () {
    instance=null;
    initComponents();
    public static PlayClip getInstance(){
    if (instance==null)
    instance=new PlayClip ();
    return instance;
    private void initComponents() {
    JButton OK = new JButton ("OK");
    OK.addActionListener (
    new ActionListener () {
    public void actionPerformed (ActionEvent e) {
    player.close ();
    instance = null;
    dispose();
    getContentPane ().add (OK, BorderLayout.NORTH);
    setSize (300, 300);
    show ();
    createPlayer ();
    /** Creates new form PlayClip */
    private void createPlayer () {
    if (file == null) {
    return;
    removePreviousPlayer ();
    try {
    //create a new player and add listener
    player = Manager.createPlayer (file.toURL () );
    player.addControllerListener (new EventHandler () );
    player.start (); //start player
    catch (Exception e) {
    JOptionPane.showMessageDialog (this, "Invalid file or location", "Error loading file", JOptionPane.ERROR_MESSAGE );
    System.exit (1);
    private void removePreviousPlayer () {
    if (player == null )
    return;
    player.close ();
    Component visual = player.getVisualComponent ();
    Component control = player.getControlPanelComponent ();
    Container c = getContentPane ();
    if (visual != null)
    c.remove (visual);
    if (control !=null)
    c.remove (control);
    private class EventHandler implements ControllerListener {
    public void controllerUpdate (ControllerEvent e) {
    if (e instanceof RealizeCompleteEvent ) {
    Container c = getContentPane ();
    Component visualComponent = player.getVisualComponent ();
    if (visualComponent != null)
    c.add (visualComponent, BorderLayout.CENTER);
    Component controlsComponent = player.getControlPanelComponent ();
    if (controlsComponent != null)
    c.add (controlsComponent, BorderLayout.SOUTH);
    c.doLayout ();
    }

    JDunlop,
    thanks for your quick reply to my java.sun.com forum posting! i just got back from vacation, so i didn't get a chance to try your method til now. i pulled your email address off the website to update you on my problem playing an avi file in JMStudio (JMF).
    as per your instructions, i downloaded the divx player at www.divx.com and tried to play the avi file. this is the error the divx player gives:
    Divx Player 2.1
    The file contains unknown video data
    The file contains the following type of data:
    Video data: FOURCC code "MP42"
    You may need to install a new video codec on your computer to watch this video
    Some quick questions:
    1. Where could I find the "MP42" codec to play my avi file in JMStudio (JMF)? Does java.sun.com have video codecs?
    2. You mentioned in your posting "If you don't have the one that was used in the encoding, your out of luck." Does this mean that I need to know how the avi file was originally coded and have the original codec to decode (play) it?
    Thanks,
    lac410
    P.S. If you need more Duke Dollars for your help, I'd be happy to award them to you.
    Re: Please help: Why JMF does't play .avi video clip?
    Author: JDunlop Jun 5, 2003 5:00 AM
    sounds to me like you are missing a video codecs. If you don't have the one that was used in the encoding, your out of luck. Download the player from divx.com, it will tell you which codecs the video needs (if it won't play). You can then search the net for that particular codecs.

  • I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

    I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

    I going to recommend again, downloading and installing some video helper applications.
    1. http://perian.org/ (this will add a number of different file types to the ones QuickTime already plays)
    2. http://www.divx.com/en/software/mac (will add more file types to what QuickTime can play)
    Either one of these might be necessary to get MPEG Streamclip to export the video. Failing that the only other thing I have found is an obscurve discussion thread on Avid.com:
    http://duc.avid.com/archive/index.php/t-277791.html
    I've figured out what the problem is on my end. The video came from Avid on a Windows machine and was encoded with Squeeze. I found out that the 2 seconds of black at the top of the video were at a different frame rate than the rest of the video. I chopped off the 2 seconds of black and started at the first frame of video, exported it with Quicktime Pro and was able successfully view the video in ProTools. Apparently Squeeze will let you create a movie file that has different frame rates within the same movie... This fixed my issue that was exactly as you describe, hopefully it might work for you.
    Lastly, you could try converting the video clip using HandBrake

  • When I try to play a video clip in Safari I get a Plug-ins blocked message

    When Safari is open and I try to play a video clip, it won't play and I get a Plug-ins blocked message. How can I fix it?

    Go to Adobe's website and use the uninstaller for FlashPlayer. Go back and download and install FlashPlayer.

  • I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How can i export video clips in iPhoto into iMovie?

    how can i export video clips in iphoto into imovie?

    Hello andrewmarkp,
    As long as the videos are in a format that can be used by iMovie, they will appear in your Event Browser, under 'iPhoto Videos.'
    iMovie '11: Use video from your iPhoto library
    http://support.apple.com/kb/PH2196
    If you’ve imported video from your digital camera into iPhoto, it appears automatically in your iMovie Event Library (as long as the video is in a compatible format).
    To use iPhoto video in iMovie:
    Click iPhoto Videos in the Event Library.
    The videos appear in the Event browser on the right. You can select and use the video just as you would any other footage.
    To learn about importing video into iPhoto, open iPhoto and choose Help > iPhoto Help.
    Cheers,
    Allen

  • Can a YouTube video clip be opened in the Firefox browser, so it is the only thing visible?

    Watching a concert in YouTube is nice, but small, so it would be nice to only open the video clip in the browser without the comments and other video clips in offer, so it is easier to see more en detail, even though it is not gone into full screen.

    Tap the ESC key to return your Firefox window to normal mode with the tabs (when in video full screen mode).
    Alternately, you can download and save the video to your hard drive, then open a separate video player and play the video which will not interfere with your current browsing, if you are just listening to a concert. You can switch back and forth between Firefox and the video player by clicking the appropriate icon in your Windows task bar.
    *Good video downloader (there are others) - https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/
    *Good separate video player (there are others) - http://www.videolan.org/

  • No keyboard shortcuts for playing / resuming video clips?

    Are there any keyboard shortcut to play / resume video clips in the Photos app?
    It's super annoying needing to click on the play button every time I navigate to a new clip!
    If there's no way to do it now, are there any place we could submit feedback to Apple?

    Ok found the feedback link...https://www.apple.com/feedback/photos.html
    If anyone else is troubled by this, please also send feedback with the link above.

  • Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
    https://discussions.apple.com/docs/DOC-2491
    MtD

  • HT1551 I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us).  Ever since downloading the update, we cannot access movies, play movies, or access iTune store.  We can play YouTube videos so not a connection

    Help.  I recently downloaded the latest software update for on my Apple TV (per the prompt Apple TV gave us).  Ever since downloading the update, we cannot access movies, play movies, or access iTune store.  We can play YouTube videos so the problem is not related to the connection.  It happens only when we are trying to access Movies.  Very confused.  Our AppleTV was working fine until I did the new software update.  Now this problem!  Help!

    re-add the shared lib
    check the firewall on the computer

Maybe you are looking for