I can see my ipod nano 2nd generation under finder but not under itunes.

I can see my ipod noano 2nd generation under finder but not under itunes. I can't upgrade the music on the ipod nano if itunes doesn't show it. How can't I fix this problem?

See this article first.
http://support.apple.com/kb/TS1461
If still no luck, try a low level format of the iPod using Disk Utility and the instructions provided in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Similar Messages

  • Have old ipod nano (2nd generation) with music from an old itunes account ... I have new itunes account now...how do I get my old purchased music into my new itunes library?

    I have an old ipod nano (2nd generation) with music on it from an old itunes account from a few years ago.  I have a new itunes account now.  How do I get the music (that I purchased) transferred into my new itunes library?

    Hi sid1010,
    Welcome to the Support Communities!
    You can redownload music that you have purchased directly to your iTunes Library.  Here's how:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • My ipod shuffle 2nd generation is charging but not starting.

    My Ipod shuffle 2nd generation 4 yrs old is charging when i connect it to the computer it blinks orange light then when i eject it, it shows green light. But afterwards when i start it nothing happens. It used to work very nicely before but now Its doesnt respond at all. I have reset it several times. Ipod software version is 1.0.4 and i use it in latest itunes. Please help.

    That most likely problem is that the iPod's battery is worn out and not able to hold a charge anymore.  So, it appears to charge while connect to USB for power, but a few seconds after it is disconnected, it goes dead.

  • IPod nano recognized in MY Computer but not in iTunes

    My iPod nano is recognized under My Computer but not in iTunes.
    I formaatted the iPod nano as FAT32 using the format option when right-clicking on the drive in My Computer.
    I installed the latest version of iTunes software. I adopted the five R's approach to resolve my issue. I have wanted to restore the iPod but this option is not available in iTunes, since the iPod is not recognised by the software.
    The iPod diagnostics option in iTunes indicates the following:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corp. Latitude L400
    iTunes 7.0.2.16
    iPodService 7.0.2.16 is currently running.
    iTunesHelper 7.0.2.16 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskIC25N020ATDA04-0______________________DA3OA70A, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
    USBSTOR\DiskWD_____2500BB_External0602, Bus Type USB
    Universal Serial Bus Controllers:
    NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 0. Device is working properly.
    NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 1. Device is working properly.
    Standard Enhanced PCI to USB Host Controller, PCI bus 129, device 0, function 2. Device is working properly.
    Intel(R) 82371AB/EB PCI to USB Universal Host Controller, PCI bus 0, device 7, function 2. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information
    ORLAITH'S I (I:\), iPod nano running firmware version 1.1.1
    Serial Number:
    Bus Speed: 61440
    The last connected iPod serial number:
    The iPod Service Logging Information:
    [SERVICE: 0x834,09:19:26 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Fri Dec 15 09:19:26 2006)
    [SERVICE: 0x834,09:19:26 INFO] ##### iPodService starting as a service, version: 7.0.2.16
    [SERVICE: 0x848,09:19:27 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0x87C,09:19:27 INFO] Listener Window created
    [SERVICE: 0x87C,09:35:21 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:22 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:15:58 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:15:58 INFO] device is an iPod
    [SERVICE: 0x87C,10:15:58 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:15:58 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0x87C,10:15:58 INFO] [1] Assigning session 0
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
    [SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [1] input #0 from src #0
    [SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [1] input #1 from src #0
    [SERVICE: 0x86C,10:15:58 INFO] [1] input #0
    [SERVICE: 0x870,10:15:58 INFO] [1] input #1
    [SERVICE: 0x86C,10:15:58 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
    [SERVICE: 0x86C,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x870,10:15:58 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0x870,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x87C,10:16:01 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:01 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:01 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:01 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:01 INFO] [1] input #2 from src #0
    [SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\H:
    [SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x87C,10:16:01 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x874,10:16:02 INFO] [1] input #2
    [SERVICE: 0x874,10:16:02 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
    [SERVICE: 0x874,10:16:02 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x878,10:16:02 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x878,10:16:02 INFO] [First Connect] Creating connect event for device 1
    [SERVICE: 0x878,10:16:02 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x878,10:16:02 INFO] [1] input #3 from src #0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x86C,10:16:02 INFO] [1] input #3
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\F:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\E:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress state is 2, Waiting to mount = 1
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0x86C,10:16:02 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0x86C,10:16:02 INFO] VendorId: Apple
    [SERVICE: 0x86C,10:16:02 INFO] ProductId: iPod
    [SERVICE: 0x86C,10:16:02 INFO] revision: 1.62
    [SERVICE: 0x86C,10:16:02 INFO] vendor bytes:
    [SERVICE: 0x86C,10:16:02 INFO] 02 01 00 00 00 00 00 00 00 0C 00 06 92 00 00 00 00 00 00 00
    [SERVICE: 0x86C,10:16:02 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0x86C,10:16:02 INFO] [1] Power State: Powered
    [SERVICE: 0x86C,10:16:02 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\D:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x86C,10:16:02 ERROR] Did not find first letter of stage
    [SERVICE: 0x86C,10:16:02 INFO] got HotPlugState 0
    [SERVICE: 0x86C,10:16:02 INFO] [1] serial number 000A270018314842
    [SERVICE: 0x86C,10:16:02 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:02 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:02 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:02 INFO] [1] input #4 from src #0
    [SERVICE: 0x870,10:16:02 INFO] [1] input #4
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\H:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\F:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0xD40,10:16:03 INFO] <0x4> Got Serial #
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\E:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x870,10:16:03 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0xF74,10:16:03 INFO] [1] Progress state is 2, Waiting to disconnect = 0
    [SERVICE: 0xAD8,10:16:03 INFO] Mounted
    [SERVICE: 0xAD8,10:16:03 INFO] [1] already mounted!
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\D:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x870,10:16:03 ERROR] Did not find first letter of stage
    [SERVICE: 0x870,10:16:03 INFO] got HotPlugState 0
    [SERVICE: 0x870,10:16:03 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x870,10:16:03 INFO] File does not exist!
    [SERVICE: 0x870,10:16:03 INFO] [1] iTunes Preference file does not exist!
    [SERVICE: 0x870,10:16:03 INFO] [1] ===== iPod Nano =====
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] [VolumeArrive] mask = 0x100
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:03 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:03 INFO] [1] input #5 from src #0
    [SERVICE: 0x878,10:16:03 INFO] [First Connect] Creating mount event for device 1
    [SERVICE: 0x878,10:16:03 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\I:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x878,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x870,10:16:03 INFO] 10:16:3, year 2006, day of yr. 348, GMT offset 0 isDST 0
    [SERVICE: 0x878,10:16:03 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x878,10:16:03 INFO] [1] input #6 from src #0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\H:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x870,10:16:03 INFO] [1] progress is now 0
    [SERVICE: 0x87C,10:16:03 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:16:03 INFO] [1] input #7 from src #0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\G:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\F:
    [SERVICE: 0x878,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\E:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\D:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x878,10:16:04 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:04 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x870,10:16:05 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x870,10:16:05 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x870,10:16:05 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0xAD8,10:16:05 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x870,10:16:05 INFO] [1] input #5
    [SERVICE: 0x86C,10:16:05 INFO] [1] input #6
    [SERVICE: 0x874,10:16:05 INFO] [1] input #7
    [SERVICE: 0x870,10:16:05 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
    [SERVICE: 0x870,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x86C,10:16:05 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Mount
    [SERVICE: 0x86C,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x874,10:16:05 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0x874,10:16:05 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x844,10:16:05 INFO] iTunes already running in current session.
    [SERVICE: 0xD40,10:16:05 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xF74,10:16:05 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xF74,10:16:05 INFO] Mounted
    [SERVICE: 0xF74,10:16:05 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xF74,10:16:05 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x858,10:16:05 INFO] <0x4> COM request for device 1 drive letter - I
    [SERVICE: 0xF74,10:16:05 INFO] Mounted
    [SERVICE: 0xF74,10:16:05 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xF74,10:16:05 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xF74,10:16:05 INFO] File does not exist!
    [SERVICE: 0xF74,10:16:05 INFO] [1] CreateFileW error 0x3
    [SERVICE: 0xF74,10:16:05 INFO] [1] WriteNewPrefs FAILED!
    [SERVICE: 0xF74,10:16:05 INFO] [1] ReadDevicePreferences() failed!
    [SERVICE: 0x858,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x858,10:56:59 INFO] Mounted
    [SERVICE: 0x858,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x858,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xCFC,10:56:59 INFO] Mounted
    [SERVICE: 0xCFC,10:56:59 INFO] [1] already mounted!
    [SERVICE: 0xCFC,10:56:59 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x858,10:56:59 INFO] Mounted
    [SERVICE: 0x858,10:56:59 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x858,10:56:59 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x858,10:56:59 INFO] File does not exist!
    [SERVICE: 0x858,10:56:59 INFO] [1] CreateFileW error 0x3
    [SERVICE: 0x858,10:56:59 INFO] [1] WriteNewPrefs FAILED!
    [SERVICE: 0x858,10:56:59 INFO] [1] ReadDevicePreferences() failed!
    [SERVICE: 0xD68,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xD68,10:56:59 INFO] Mounted
    [SERVICE: 0xD68,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xD68,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    I think a more comprehensive format might solve the problem. Anyone with any ideas.

    see if this helps
    http://docs.info.apple.com/article.html?artnum=93716

  • IPhoto on my macbook air does not see my ipod nano 2nd generation. Is there a way to get the photos from this device into my photo stream without wiping them, which will happen if I sync with iTunes

    I have photos on an old 2nd generation ipod nano, that have since been wiped from any other source.
    I now have a shared photostream through icloud between all my other apple deivces (iphone, ipod, ipad, macbook air, apple tv), but I cant find a way to get the ipod nano photos onto the stream. The original photo files were detroyed with an old computer, that also had the itunes library to which the nano was linked.
    The photos are the only items I want from the nano. Can anyone help?

    You need to copy the photos off of the Nano and onto your MacBook Air first.
    The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos.  So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
    In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
    http://www.macroplant.com/podtopc/
    B-rock

  • Ipod nano (2nd generation) serial number is not being recognized

    so i got a silver 2nd generation 4gd ipod nano and for some reason, everytime i try to go to register my product it says that the serial number is not found. i am then asked to type in the manufacture number or something. it then says that that is found, but the serial number is still not found. what's up???

    http://www.apple.com/support/service/help/warrantycheck/
    As mentioned by another poster, the article above directs users whose serial number is not recognized to call Apple.

  • My new ipod nano appears on my desktop but not in iTunes

    Initially the setup of the iPod nano work perfectly on the iMac, it came up in iTunes and synced everything without a problem. I then plugged it into my Macbook Pro just to charge it and it came up in iTunes yet I never synced it.
    Later I went to sync music onto the nano from the iMac and it is appearing on my desktop, not in iTunes. I have tried reseting the computer, changing USB ports, restting the iPod and nothing has worked. What should I do??

    Hello!
    You need to put your iPod into Forced Disk Mode and restore it using iTunes.
    Try resetting your iPod by following these steps:
    1. toggle to hold switch on and then off again
    2. press the Menu and Center/Select buttons together until the screen goes black (should take no longer then 30 seconds)
    3. as soon as you see the Apple logo let up on the buttons and press down the Center/Select and Play/Pause buttons until a checkmark appears on the screen.
    4. connect your iPod to your computer and restore thru iTunes

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • Can you get games on the iPod Nano 2nd generation?

    This is probably a simple question, but can you get games on an iPod Nano 2nd Generation?

    No, unless you previously bought iPod click wheel games and still have copies of them. Apple no longer sells those.
    (114468)

  • Can someone guide or let me know Ipod Nano 2nd Generation watch video?

    Hi all,
    Just want to know IPOD Nano 2nd Generation can update the Firmware to 4th Generation to watching video?

    writewhat wrote:
    if you want to watch video you should download " Linux " if will help you
    Not possible on a 2nd gen nano.
    http://www.ipodlinux.org/wiki/Nano2G

  • Can I replace my ipod nano 2nd generation with ipod nano 3rd generation.?

    I bought an iPod Nano 2nd generation last year in June and the warranty lasts until June of this year 2008. I want to know if there is any way to upgrade to an iPod Nano 3rd Generation without paying for a whole new iPod. If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano. Is there any way to get the 3rd Generation iPod Nano?
    [x|http://www.parikesit.com]

    If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano.
    If they still have iPods in stock of the older generation, you will get one of these; the color may vary, but other specifications should be the same. If not, you will most likely get a current model.
    You may want to find someone willing to purchase that iPod, and then put the money toward a current one.
    (32512)

  • I have an ipod nano 2nd generation with a non responsive click wheel

    I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
    The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
    I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

    You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

  • Battery dead on ipod nano (2nd generation) What do I do?

    Dead battert on my ipod nano (2nd generation) What do I do? Should I get it replaced or just buy a new one?

    You have 1 of three routes if you want to get it replaced. Whether or not it is worth it is entirely up to you.
    1) Have Apple replace the battery in it for a flat fee.  See this page for pricinghttp://www.apple.com/support/ipod/service/prices/ and this page for setting up the service request. http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    2) Locate and utiltize a third party service (there may even be some shops/service centers in your area).  I have no suggestions as to which one is better than another, so for now you'll have to Google for "iPod battery replacement" and you should get a number of results. This is slightly cheaper than the Apple route although a bit riskier in terms of having the job done right.
    3) If you consider yourself handy with small electronics you can purchase a new battery from an online retailer and use one of the numerous guides online to swap it out yourself.  I usually stick with http://www.ifixit.com for parts and step-by-step guides. Of course this route is the cheapest, but is the most difficult.
    B-rock

  • White screen on iPod nano 2nd generation

    I get a white screen on my iPod nano 2nd generation.  iPod still plays but I can't see what's on screen to control it.  Do I need a new battery?

    Hi mmeves,
    Any luck ? I have got the same problem with my iPod nano too.
    I tried resetting but in vain!
    Pl. let me know if you could get yours fixed
    rgds
    Mahesh

Maybe you are looking for

  • ARD asks for computer passwords at every launch

    Every time I launch ARD on my admin machine, it asks for the computer passwords in my list of computers.   I have 120 computers, and the pw is different for each one!!  This is getting annoying, to say the least. Is there a plist or some other file t

  • How to give f4 help to oo ALV ?

    How to give f4 help to oo ALV

  • Full screen canvas problem

    switching between the fullscreen canvases makes the screen flashes on some mobiles. I want to make one fullscreen canvas and several game state classes which paint on the same canvas. Is there any sample code or tutorial about this. thanks

  • Help with Custom Component: Ajax and ValueChangeListener

    Hello, I am trying to create a custom component that triggers an update via Ajax. However, I would also like to trigger a ValueChangeListener method from the same component, however I am unsure of how to obtain and trigger the ValueChangeEvent. The c

  • Calling one DAO from another DAO

    Ok I am having a problem. But let me first give you the background: I have a BaseDAO in which Connection is encapsulated: public abstract class BaseDAO {    private Connection _connection = null;    public BaseDAO( Connection connection ) {       thi