I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.
I can't connect to I tunes with my I pad 3, it say cannot connect to I tune store, any tips on how to overcome this issue, thanks.
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Similar Messages
-
I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?
Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone. -
I have the new iPad and I could not use I tunes , every time I get an error says "cannot connect to itunes store " please help
Sorry, yes iTunes on your computer.
When I updated my iPad 3 and iPod Touch 4th generation to iOS 6 a few months back, I was able to update the iPad effortlessly over WiFi. but I kept getting error messages when trying to update the iPod over WiFi, so I used iTunes on my MacBook Pro.
Connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
If you are using iTunes 11, go to View>Show Sidebar at the top - so the sidebar is visible. -
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
Can't synch iphone. Get message "synch server failed to synch the iphone. Anyone have any suggestions on how to fix this issue?
Windows 7
ios 7.1
iphone 5Hello, skifmli
Thank you for visiting Apple Support Communities.
I understand that you are unable to sync your iPhone and receive an error. I was start with restarting iTunes and your computer. Once this is done, test the results by attempting a sync. If the issue persists, go through the troubleshooting steps in the article below.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Cheers,
Jason H. -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
Hi. I can't get the flash on my iPhone 5 to work. Does anyone have any ideas on how to troubleshoot this. Any help would be appreciated. Thanks.
Tap Camera App > switch to video > see if the flash will turn ON. If still problem, Restore your iPhone with iTunes on computer. See if fixed. If still problem, your iPhone has full Warranty with Apple.
-
I am trying to download an update to my iphone, but in the middle of the download, I get an error message that reads, 'There was problem downloading the software for the iphone. The network connection timed out'. Any idea how to reslove this issue?
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than YouIf it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase. -
I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?
Take a look at the FileSelector
First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one. -
All I get is a blank home page, along with a spinning beach ball. I cannot open the preferences to try to clear the cache, and must force quit to get out of Firefox. I have tried clearing the cache from the Library, and trashed the preferences file. I uninstalled the application, and reinstalled a newly downloaded application. I have restarted the computer many times, and run the disk utility to repair permissions. Nothing has worked. I have not added or upgraded anything on my computer since Firefox was working just a few days ago. Safari works fine connecting to the web. I have read through most of the support documents at Firefox Help, but cannot find anything that addresses this specific problem of hanging immediately after launch.
I have the exact same problem--and it just started around November 11, 2011. I have rebooted, reinstalled, and relaunched many times and Firefox just hangs on launch. Spinning beach ball of death and all that.
I have not installed any new software or changed anything on my computer.
Using Mac OS X 10.6.8, Aluminum Mac with 2.4 GHz Intel Core 2 Duo, 8 GB RAM. -
I have a new MAC and when I start it up, the wifi connects ok, but when I wake it up, I have to manually connect it to my wifi, any suggestions?
Take it to Apple and purchase an out of warranty replacement for it.
Replacement is the only way to fix broken electronics.
Allan -
I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb
You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
Cheers, Tom -
I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,
Maybe you are looking for
-
How to reset the location of a Time Machine taken to a different time zone?
I have recently moved my Time machine to a different country and time zone. I have reset the whole thing, entered the right time zone in the manual set up, but it still displays the old location when automatically searching for time zone. Also, when
-
How do i know if my samsung tv is compatible with my macbook pro?
I have an LCD samsung TV, the model is LE40R86BDX when i connect my macbook pro by mini displayport HDMI adapter on my samsung tv i can't see the monitor of my macbook pro, and tell me : no signal! help me!!!!
-
Import InDesign CS2 Interchange format into CS5
I have a lot of InDesign CS2 templates and documents. Since it is not possible to open them directly in InDesign CS5, I have used Interchange format from InDesign CS2 and everything worked beautifully. But there is a problem. Every text frame from In
-
Hi all, I'm integrating Oracle Maps (10) in BISE, I've used Navtweq maps with my spatial data and I've created some maps, themes etc. Now I'm trying to create some more complex JDBC themes. Everything works fine if I use simple query, but I'm not abl
-
Hello, i have a UCCX server configured as First Node, this is in a domain, when a try to add a new server this message appears Add to cluster is failed because of ClusterException invalid AdminPwd: AdminPwd(CSERVUCCX01)=conetwor*2009, AdminPwd(CSERV