I can't drag and drop iTunes music files into Roxio Jam 6 anymore and, now I have to import music one song at a time by using the " " or "-" buttons on the bottom. What is going on? G5 Dual 2 Ghz and OS 10.4.11

Hi. I have not used Roxio Jam for quite a long time and I just wanted to make a few CDs. Jam used to work easily and well. I have a problem. I can't drag and drop iTunes music files anymore and, now I have to import music one song at a time by using the "+" or "-" buttons on the bottom. What is going on? I trashed the preferences file and restarted Jam to no avail. I also have selected that Jam should open files with iTunes in the Jam preferences. I have a G5 DP 2Ghz PPC  machine with OS 10.4.11, iTunes 9.2.1 and Quicktime's version is 7.6.4. I have 2 GB of RAM and the machine has dual 1.25 Ghz. processors plus a 500 GB HD. Can anybody give me any suggestions?
Thanks in advance,
Larry

I found an solution.
Uninstalling AirParrot as well as the two offending AirParrotDriver.kext and APExtFramebuffer.kext files in System>Library>Extensions was the fix. All problems disappeared.

Similar Messages

  • When I drag and drop a wav file into garage band it is rejected. How to imposrt a wav file?

    Hi Everyone,
    I want to edit a voice recording, done in WMA format, in Garage Band.
    I saw a video in which the fie is simply draged and dropped in the timeline area, and the time line appears. Then youcan edit it.
    But when I drag and drop this WMA file into the editing area, it jumps back out to where I dragged it from.
    Is there any way to import WMA files intoGarage Band?
    Thank you, Giorafromny

    Giorafromny wrote:
    Is there any way to import WMA files intoGarage Band?
    not directly, you'll need to use some software to convert it to a format supported by GB:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importformats
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Best settings for exporting and dropping a MOV file into iDVD7?

    I have a movie (originally shot in HD), made in iMovieHD6, and that I'd like to export and drop into iDVD7. *What settings would the brain trust recommend?* I cannot seem to get iDVD to render a good version through direct export from iMovie. (As a side, I wonder if it is because I started this process by bringing AVCHD files from my camera into iMovie8 and "going backwards" to iMovieHD6.)

    I have used Pro-res from Final Cut Pro into iDVD and it works.
    *This is from iDVD help menu:*
    Video and image formats that work with iDVD
    You can use these movie and graphic formats in iDVD:

    Most video or image files supported by QuickTime (see the list of unsupported QuickTime formats below)

    16:9 widescreen formats

    AAC, MP3, and AIFF audio files

    Any format from iMovie: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD
    High definition video is converted to work with the format of your project. iDVD supports using 16:9 widescreen video; therefore, when your DVD plays on a DVD player that supports widescreen format, the footage appears in its original aspect ratio.
    The following video and image formats are not supported in iDVD:

    Copyrighted or protected videos.

    Movies saved in thousands of colors using the “none” compression setting in iMovie.

    48-bit color images (16 bits per color). To use source files in one of these formats in iDVD, save them in a supported format.

    Aurora uncompressed files. For best results, export Aurora clips as DV-format video before importing them into iDVD.

    QuickTime VR, MPEG-1 or MPEG-2, Flash, streaming or encrypted movies, or QuickTime spanned movies. You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks.

    QuickTime Fast Start movies. (Fast Start movies are intended for Internet playback.) When saving a QuickTime movie for use with iDVD, click the Options button in the QuickTime Export dialog and make sure that the “Prepare for Internet Streaming” checkbox is not selected.

  • Drag and drop of html-files into Firefox 3.0.1 no longer works after going from XP to Win7

    I use firefox portable 3.0.1 on an external disk.
    Used to have a portable PC with XP SP2, now have a new Windows7 Professional machine.
    On the XP machine I was able to open Firefox from the USB disk and drag&drop html-files into its window to open them. Suddenly on Windows7 this no longer works?? Any ideas/fixes?
    Note: I do have to start the portable Firefox in XP SP2 compatibility mode, after which it seems to work fine (apart from this issue thus far)
    A lot of configuration went in this Firefox portable install, so it would be nice to get this to work with a quick fix instead of having to start from scratch with a newer version.

    -
    It, .. or they, don't within either browser that I have installed - and am using, ..
    .. they had previously, ... don't know what I did exactly to caused this circumstance.
    .. is my question. (.. if not fully clear.)
    Just looking to try to find out what I can do, either whether to "back-off" from what I've done - more recently, regarding the two different downloads that I've pointed to above, .. apparently - only, having, superseded a more simply configuration .. previously working.
    This, or either, adjust the settings - broader / somewhere (more generally) - otherwise, .. in order to have these files, play, .. in browser.
    Rm(richard583)

  • Drag and drop simple ".mov" files, into 2 dif. browsers, no longer working

    -
    Did something, that caused my main drag and drop, of simple ".mov" files, into 2 different browsers - "Safari", Version 3.0.4, and "Camino", Version 1.6.8, .. to stop working.
    To be clear, this is regarding, just some simply ".mov" files which I have generated. (Individual hourly, weather images - like; in sequence. Generated, in / with, QuickTime - itself.)
    At this point, where dropped from a folder, into "Camino", .. it routes these back to my main desktop. - (Before the problem, .. played them, in browser.)
    "Safari", only brings up the folder that the main file is in — within a separate folder window.
    (As with "Camino", played these in browser, previously.)
    (Have gone into "preferences", either browser, .. and can't figure things from there.)
    Problem occurred follow two different downloads / installations
    "DjVu Browser Plug-in"
    http://www.caminova.net/en/downloads/download.aspx?id=1
    and, ..
    "Flash Player" (.. for Mac OS 10.4 - 10.5)
    http://get.adobe.com/flashplayer/otherversions/
    Have tried, either "uninstalling", .. or "trashing" these.
    (Uninstalled, "Flash Played" - with specific "Uninstalled" app.. / "Trashed" "DjVu Browser Plug-in".)
    Any help, certainly appreciated.
    Rm(richard583a)

    -
    It, .. or they, don't within either browser that I have installed - and am using, ..
    .. they had previously, ... don't know what I did exactly to caused this circumstance.
    .. is my question. (.. if not fully clear.)
    Just looking to try to find out what I can do, either whether to "back-off" from what I've done - more recently, regarding the two different downloads that I've pointed to above, .. apparently - only, having, superseded a more simply configuration .. previously working.
    This, or either, adjust the settings - broader / somewhere (more generally) - otherwise, .. in order to have these files, play, .. in browser.
    Rm(richard583)

  • New JNDI name created for each drag and drop of database table into table

    Hi All,
    I'm using Netbeans 5.5 with Visual Web Pack with Mysql as backend. Whenever I drag and drop a database table into table component it creates new JNDI (data source) name for each table. I want to use single JNDI name for all tables. If I change the JNDI name to default name then the design disappears and shows error . Is there any option to set the JNDI name unique for all tables?
    Thanks in advance.

    Hi again,
    Well I've tried using the MouseListener / MouseMotionListener approach but it doesn't quite seem to work, although it does get the events correctly. I think the reason is that it doesn't interact correctly with the Java DnD machinery which is something that V.V hinted at. It's something that I may need to look into if / when I have more time available.
    I have to say though that I haven't had any problems with scrollbars - we're making fairly heavy use of large tables and if you drag over a table with a scroll bar and move to the top or bottom then it scrolls as you would expect and allows you to drop the data where you like. For this situation I've used pretty much the same approach as for the toy example above except that I've implemented separate source and destination TransferHandlers (the source table is read-only, and it really doesn't make sense to allow people to drag from the destination table so I've essentially split the functionality of the example handler down the middle).
    I'm not actually particularly in favour of messing too much with the mechanics of DnD, more because of lack of time than anything else. Guess I'll just have to put up with this for the moment. Doesn't help that DnD is so poorly documented by Sun.
    Thanks for all your help.
    Bart

  • Why do i get a pop up saying"the Itunes library file cannot be saved. You do not have enough access priviledges for this operation" when i add music to my itunes library?

    Why do i keep getting a notice from Itunes saying:
    "The Itunes library file cannot be saved. You do not have enough
    access privileges for this operation" every time i add music my Itunes library?

    Hello deborahjael,
    Thanks for using Apple Support Communities.
    To troubleshoot this error message in iTunes please follow the directions in the link below.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Take care,
    Alex H.

  • I use to drag and drop an web address into a link toolbar, can't seem to figure out how to do this...?

    I just upgraded to Windows 7 and with it I got the latest Firefox. There is nothing like learning 2 things at one time. On my old XP and 3.? all I have to do was drag and drop a web address into a link toolbar. Saving all my frequent visited or just sights I want quick access to, to a toolbar quick button. I have been playing with this for days and decided to try this Forum. I did find the Bookmark toolbar, but cant seem to figure out what is if for or if you can drop into it. When I right click it and Customize, it shows me add on buttons, but nothing to do with web addresses or alike...
    Bottom line; I want to be able to drag and drop a web address into a toolbar for recall latter and be able to edit the address with a right click at a latter date in necessary...
    Thanks, Mike

    You can drag and drop the favicon also known as the [https://support.mozilla.com/en-US/kb/Site+Identity+Button site identity button], at the left hand edge of the location bar onto a toolbar to bookmark the site.

  • ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want it?

    iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?"  I can locate it and all my other music, but can only open one song at a time.  How do I set it to open all my music whenever I want?
    Message was edited by: Woildbill

    I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
    This is how I did it on Windows 7 with iTunes 10
    1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
         Example: C:/Users/Woildbill/My Music/iTunes/Music
    2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
    3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
    4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
    5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
    6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
    Hope this helps!

  • HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

    After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

    Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

  • How can I drag and drop a Tidal job into another group?

    How can I drag and drop a Tidal job into another group? In Tidal Help, it says-
    In the Jobs pane, press and hold the Ctrl key and at the same time right-click and either individually select individual jobs within a job group or drag your mouse cursor over a block of jobs that you wish to select. You can only move multiple jobs between job groups if the jobs being moved are on the same level.
    Keeping the right mouse button depressed, drag the cursor to the job group that you wish to move the jobs to and release the mouse button.
    When moving jobs from one job group to another, you must decide if the moved jobs keep their original job group attributes or assume the calendar and agent characteristics of its new job group.
    A confirmation dialog, offers three inheritance options for the jobs moved to the "new" job group parent. Select one of the following options:
    However, when I attempt to follow those instructions, it doesn't work at all and there is no indication that it's even trying (i.e., I don't see the selected job following my cursor at all and all I get is the normal menu when you right click anywhere on the screen.)
    Is there another way to do this or is there a master setting that needs to be changed so that ability is enabled?
    Thanks.

    Go into edit mode for the job group group and just manually edit the section for Parent job/Group.
    Cheers

  • InDesign CS5 stopped working and Can't drag or drop

    A colleague of mine has a Mac G5 with OS 10.5.8 and Adobe InDesign CS5 installed which has suddenly stopped working. On top of that she can't drag or drop items either.  She didn't have this issue yesterday. She didn't install anything new or added any new hardware.
    Does anyone have a solution?

    Hello,
    In the Finder, at the locations/folders she's trying to Drag & Drop, & see if they're Locked or whaat Rights she has.

  • I don't see the AirPlay button on the bottom right of my iTunes (v 10.6.3) window. Does anyone know why and how I can set it up? Thanks!

    I don't see the AirPlay button on the bottom right of my iTunes (v 10.6.3) window. Does anyone know why and how I can set it up? Thanks!

    You do not have to have an Apple TV, but you should have an AirPlay capable speaker on your network.

  • Help, I can not drag and drop address book contacts into numbers.

    i have read the manual. watched videos on youtube, but I can not drag and drop address book contacts into numbers or pages.  I upgraded to Numbers 09.  set up the fields as stipulated, but when I drag a contact to the numbers canvas it just bounces back to address book.  I tried reinstalling 09 thinking it was a faulty install.  no luck.  Have tried dragging to balnk part of canvas, to the table, and to a table with fields, no luck. 
    Thank you.

    Could be a preferences setting. See Jerry's post in this thread.
    Regards,
    Barry

  • HT4628 My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected

    My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected?? Any help out there?

    Unfortunately the Netgear DG834N router is rubbish with Macbook Pro's. I've had a few netgear routers, which were all good with my mac, which is why I bought the 'N' series one as an upgrade to the 'G' version, but basically it crashes my Mac constantly. I get the fade up grey screen forcing my to hard power off my book. everything freezes. It plain just doesn't work. wireless 'N' is still just in draft form and the difference between the Netgear and Mac version on the macbook pro just clash. Netgear haven't updated the firmware on the router since last year, so hopefully the will soon, but I've just gone back to my old 'G' version, and stuck the DG834N on ebay. I tried all the configs, with and with out security and no luck, it always disconnected, froze and crashed.

Maybe you are looking for