I can't drag files to my iPhone 5 from iTunes. I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes Match that I know of
I can't drag files from iTunes to my iphone 5, I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes M
Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.
Similar Messages
-
i have a iphone 4 and i have forgtten my passcode but i do not have acess too itunes is there a way i can do a hard rest manually ??
The only thing you can do when you have forgotten the passcode is to restore the device as a new phone. A restore requires a computer and iTunes. If you have the computer you normally sync with, you could restore from a backup and not lose any content, however if you don't have that computer, you will lose all content with a restore. If you don't have that computer, you can restore with any computer that has iTunes.
-
I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!
Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US -
is there anyway i can track my ipod touch with just the serial number because someone stole it but i did not have the find my iphone app
You can only track it if you turned on Settings > iCloud > Find My before it was lost/stolen, and then registered it in iCloud's Find My Phone service. You must then log in to iCloud, click Find My Phone and see if it shows up. If it is turned off, not connected to the internet or been reset to factory condiditon it will not show up. There is no way to track it except in that way.
Report it to the police, insurance and cell provider in case the will blacklist the iPhone so it cannot be used.
Change your passwords for accounts on the iPhone. -
When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
How do I enter an iTunes U course code in iTunes on a PC? My teacher gave me a course code to enroll in their course (unpublished), but I don't have an iPad or iPhone. Can I use iTunes on my PC? I don't see a place to enter my enrollment code. I also tried using the link sent to enroll but it doesn't work either. Am I out of luck?
As I noted in the other thread:
There are two kinds of content available, "courses" and "collections". If you look at the iTunes U section on the iTunes Store, you'll note some are square (collection) and some have a faux wire binder and tabs (course); you can subscribe and watch collections from within iTunes, but courses only work on iOS.
The content you see in iTunes on your PC are "collections", while your teacher has created a "course". Collections are more like podcasts, with only audio or video episodes available. Courses have more structure and richer content, including assignments and iOS-specific materials like App Store links and Pages documents.
While the distinction is not particularly relevant for iOS users – one can subscribe to either type – it is admittedly confusing for desktop users since the distinction and terminology are not explicitly defined.
Does that clarify matters somewhat? -
Apparently you can have 5 computers registered for iTunes. I have 3 active computers but I guess I have other computers that are still activated that I no longer use and I no longer have as they crashed. Is there a way to delete or see what the other computers are so that I can go in and delete them? I've tried to email Apple directly but apparently I need my hardware # and obviously I do not have that # since I don't have the equipment any longer. Any help is greatly appreicated. I am trying to add another computer and it won't allow me to as they say I'm at my limit. Please help!
Sure.
Just open up iTunes on your computer -> Go to the iTunes Store -> Click your e- maill address (top right corner of the window) -> Type in your password for your Apple ID -> Under Computer Authorisations (underneath your Apple ID account balance and address) -> Press 'Deauthorise All'
-> This will deauthorise all computers and devices from your iTunes account -> you then need to re- authorise any computers/ devices you would like to use with your Apple ID for iTunes content -> to do this, select the Store tab along the menu at the top (where 'File', 'Edit', 'View' etc..... are) -> Then click 'Authorise this Computer' -> Type in your Apple ID -> Voila!
For any iOS devices (non- computers) you wish to re- authorise, these will automatically do so when you go to play iTunes content, download an app or anything like that on those devices!
Hope this helps! -
I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer
Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup. -
Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges. I am the administrator. I have tried everything I can think of. When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?
Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over. -
Trying to play iTunes to airtunes, I get a box that says I can't have more that 5 authorized computers. I don't have 5 computers. What do I do?
For small, independent developers, this "not commonly downloaded" error is a common issues in browsers. You can see complaints from developers here:
http://social.msdn.microsoft.com/Forums/da-DK/iewebdevelopment/thread/19c57259-c a6e-4f10-a26e-d2f5e03fa52d
I have placed the setup program inside a .zip file to as a workaround.
Thanks for reporting this! -
I recently updated my wifes iphone to v5 so that it could hotpoint with our new ipad. I downloaded her photos from the iphone to our imac but they were deleted from the iphone in the update. Can you import photos onto the iphone from the imac?
Are you both using different Apple ID on iTunes?
Here's some links to get you up to speed about Home Sharing
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Setting up Home Sharing
http://support.apple.com/kb/HT4620
Message was edited by: ckuan -
When updating itunes I get the message the install package can't find a file (itunes.msi) I've searched but can't find this file. How do I install it?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB. The verison software upgrade assistant runs and my phone is up to date. I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos. Thoughts?
We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted. AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
I have an ipod touch but i don't have enough memory and 0I get an upgrade soon for my phone and i want the iphone but the thing is, can i have an ipod touch and an iphone on the same itunes account like can i use my money on my ipod account for my iphone
Your iPhone and iPod can share the same iTunes account. Apps can be freely shared and used by one or both devices. You can't use money in your iTunes account to pay for your phone, but purchased apps can be used by both the iPod and iPhone.
Maybe you are looking for
-
No Images loading in Safari 6.0
Hello, Mysteriously Safari has decided not to load any images on any website I visit. After trawling the net for a while I have tried: Deleting the Cache.db file from the library file Checked that disable images is not checked on the Safari Develop
-
How can I back up files to external HD in preperation for re-install.
HI. I'm replacing a defective HD and upgrading from Tiger to Leopard in order to interface with new iPhone software. What is the best way to copy the contents of my old system to my exteral HD so that it can be easily tranferred back to the restored
-
Converting Perl Scripts into Java Servlets
Hello, I have just been assigned the job of converting some perl scripts into Java Servlets. The first problem i have run into is with quotes. The problem is in perl you can just print out blocks of html without worrying about the quotes. ie (name="j
-
My itunes store isn't showing up
My library and everything is fine, but for some reason my itunes store won't show up and it says it's loaded completely.
-
Sql loader:loading data file name to one of the tabe column.
Hi, I want to load the data file name also to one of the table column. Table structure: File_Name varchar2 Name varchar2 Age number Data File Format: Vijay|24 Anandh|24 Senthil|26 In the above eg how to write a control file to load the data file name