I can't edit sound during multi-camera editing

Hi!
When I work with multi-camera I can't cut audio. Only video. You can see it in picture. I can't find any settings to fix it. What should I do? Premiere Pro

Had the same problem: Couldn't edit main audio in a multi camera timeline, razor tool does not work and audio transitions cannot be added.
To solve the problem:
Go to the affected audio track and click on the 'show keyframes' button for that track. Make sure 'clip keyframes' is selected. The track should now become accessible to be cut and add transitions. You cannot alter the track if one of the other options is selected. For example I had Track Keyframes > Volume selected. Your volume markers will still be there and you can jump back and forth at your leisure.

Similar Messages

  • No sound in Multi-cam sequence

    Hello, Good People of this Forum,
    I have no sound in a multi-cam sequence. I have 4 audio tracks in the originating sequence with all but track 4 silenced. The audio plays fine in the originating sequence but it's silent in the MC sequence.
    Any suggestions are greatly appreciated.
    Thanks!
    wsmith

    FAQ:Why is there no audio during multi-camera editing?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Premiere becomes completely unresponsive during multi-cam preview

    While editing a 5 camera multi-cam project, Premiere completely locks me out during playback of the project.  It's like my user interface just completely died.  The project plays and nothing I do will stop it.  Autosaves do not occur and I am forced to wait an hour for the whole timeline to play (haven't waited to see if I get control even after then) or 'end task' to kill the Premiere application, thus losing all my work up until the last save.  I have had moments where Premiere locked my out for a few seconds, but I always managed to eventually get control.  The last 2 times I never got control back.
    I'm running the latest version of Premiere CC on Windows 8.1.
    Any help in how to interrupt Premiere's coma in this situation would be greatly appreciated.  Really sucks doing the same work 3+ times over.
    Michael

    i3770k 16gb RAM.... I don't think that's the problem.
    I called Adobe Tech Support and they located the problem.  I had the wrong sequence settings, which had the wrong preview format (codec).  Apparently, the best way to create a sequence with a multi-cam track is to right-click on the multi-cam clip and select 'create sequence".  This way Premiere chooses the optimal preview format for the video clip types it contains.  And this is the only way to get Premiere to optimally handle multi-cam clips with various different video formats properly, such as mine.
    I don't understand why one even has to worry about this sort of thing.  Why shouldn't Premiere ALWAYS choose the optimal playback format?  Coming from other editors I always found it really weird in Premiere that I had to select a sequence preset that was related to the video format I was editing.  For one thing, many projects have mixed format types so this system that Premiere employs seems flawed and outdated.
    Anyways, eventhough Premiere still drops a few frames during playback of my five 1080p streams, I can now edit and watch the multi-cam preview without fear of being completely locked out and losing control of Premiere.

  • Video glitch: Flashing during multi-cam playback

    Mac OSX Yosemite 10.10.2.  Maxed out iMac 2013.
    Latest Adobe PP Patch 2014.2 Release Build 8.2.0 (65)
    I'm having an issue with my multicam.  When I perform a roll or slip edit, it causes the Program Monitor (which is in multi-cam mode) to flicker between either a black screen, or a previous edit.  It won't do playback either when this occurs.  Sometimes I can fix the issue by opening a non-multicam sequence, and then clicking back to the multicam sequence, but more often than not, I have to quit.  In a 30min multicam, this occurs however often I need to change my tool, which may be 10 times.
    Anyone else had this?  Is is my GPU drivers on my Mac?  I have no idea how to update those drivers on mac, traditionally it's done for me via App Store and not often since drivers are not updated as often as Windows.  This was never a problem on Mavericks.  Anyone else?

    Hi Lawrence,
    Try this:
    Please go to File > Project settings > General and change the Video Renderer to Mercury Playback Engine software only. Click Ok and select Delete Previews.
    Let me know if this helps.
    Thanks,
    Rameez

  • I can't get sync'd multi cam Clip.

    I'm shooting with 2 cameras, both with audio.  I highlight the clips, right -click and select new multicam clip and use audio waveform to sync.  Instead of getting 1 synced multicam clip with both (camer) angles (clips) showing in the viewer, I get a multiclam clip with the 2 (camera) clips (angles) in sequence: one after the other,  Ive also tried syncing with markers as the starting point, but the same thing happens.
    The workaround is to make  synchronized clip, open it in the timeline, and carfully hack out one camera to reveal the other. Ouch.
    Anybody?

    I am having a similar issue. My system and FCP are latest updates.
    I have a set of clips shot with one tripod camera for the full length, and what looks like one or two other "roving" cameras getting closeups and other angles, but start and top points (not runnign the entire interview). Effectively these are B roll with matching audio.
    If I run Sync Clips, it makes a huge mess piling them all one atop another. The audio souds like a party, not a conversation with two people.
    When I make a Multicam clip, FCP does a "pretty good job" but some short clips are WAY out of sync...
    Then it becomes a puzzle to find where they go.
    Is there a keyboard shortcut for monitoring the video of the track on which I have just clicked the clip it's on? the one Multiclip when I am done?
    Also, ••• How do I close the Timeline back down to

  • No audio in multi-cam edit

    I finally managed a near perfect sync of my 3 sources and am ready to do the multi-cam edit thing. Except, when I bring the source sequence into the multi-cam sequence and enable the source sequence for multi-cam, there's no audio when i go play it or edit in multi-cam.
    Anyone know what's going on?
    Thanks for any help you can throw at me,
    Jon

    FAQ:Why is there no audio during multi-camera editing?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Using Audio Sync for Multi-Cam Edits Premiere Pro CC

    Hello everyone - I wanted to share some issues I've come across while using Audio to sync multiple camera angles....
    For my music video shoot I have two cameras and an external recorder where I capture the audio and then edit in GarageBand or Adobe Audition. The problem I've discovered is that when I sync the clips using audio it will degrade the quality of my finalized audio clip.
    Basically, something is happening to the audio clip quality once Premiere completed the synchronization process. I've rendered the video, exported the video etc... But there is still audio quality degradation.
    I've compared this with Final Cut Pro X and the Audio in FCP X remains unchanged and is not altered in any way.
    Has anyone else experienced this issue?

    Update: I just happened happened to have a pair of ath m50s lying around.... put them on and I can see that in the multi cam sequence, I can hear only out of the left ear... once I drag and drop something to my timeline the audio's good again...
    Sorry for this question... operator???
    I shoot tech videos on YouTube and I edit my own videos, so I guess I am the operator & observer here...
    Am shooting a tutorial...
    Cam 1 - My Camcorder that shoots the phone
    Cam 2 - Actually a screen recorder that records the steps on screen & audio from webcam
    Audio - Blue Spark Digital recording to audacity
    Now if I merge Cam 1 & Audio or Cam 2 & Audio alls fine... I can check the audio meters and everythings the same as before
    But if I create a multicamera sequence then the audio output is about 20% lower (and no Premiere's not using the audio source from Cam1 or 2 here since they are too low and am 100% sure its not either of those)
    I guess am messing up something but am unable to identify what..
    Syncronize Point - Audio
    Track Channel - 1
    Sequence Preset - Automatic
    Audio Sequence Settings - Camera 1
    Audio Channels Preset - Automatic (or Mono since my Blue Spark records in mono)
    Camera Names - Enumerate Cameras
    Any Idea where am messing up?
    Ash
    Message was edited by: C4ETech

  • No Audio when multi-camera monitor up

    For somer reason there is no audio playback when ever I open up the multi-camera monitor to edit. The audio does playback in the timeline though. Can anyone help? thanks

    Ever heard of Google? :p
    FAQ:Why is there no audio during multi-camera editing?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • No sound during import from camcorder

    When I am importing video from a DV tape in a camcorder I don't hear any sound. After the clip is captured, you can hear the sound during playback. Is there a setting that allows you to hear the sound during import? I have tried importing HDV format from a camcorder and regular DV from a tape deck with the same results.

    iMovie does not play sound on import. This makes sense if you consider that most current camcorders do not import in real time. They are faster or slower than real time depending on the speed of the Mac.
    See if your camera has a speaker. You can listen from the camcorder.

  • Solution for Multi Cam Crashes on Audio Sync?

    I am having major issues when trying to create a multi-cam clip by syncing audio. It will process a few clips and then I will get a serious error message. I would say it occurs on about 8 of every 10 attempts. At first I thought it was because I was selecting too many clips (I'm shooting a doc and sometimes need to sync 100 plus clips from multiple cameras to multiple audio tracks) But it also crashes when I try to sync a single audio track to only a handful of clips.
    I'm on an I-Mac mid 2011. I've updated the OS to Yosemite, no luck. Tech support said to upgrade my RAM to 16g, I did that and it still crashes. I've re-installed the software, still crashes. Reset the preferences, still crashes. I've installed the software on a new administrator account, still crashes. I've changed the renderer to software only, still crashes.
    I also have a Macbook Pro Retina 2013 running OS 10.8. I've tried creating multi-cams by syncing audio on that computer as well. Still getting crashes. I've tried all the changes on the lap top that I did on the I-Mac (change renderer, re-install, new administrator, reset preferences, etc) Still getting crashes.
    I've tried different projects, different footage, different drives, placing the media on the internal hard drives. Still crashes.
    I'm assuming there must be a conflict of some sort, but can't figure it out. Tech Support has been less than helpful (when I can reach them) and I'm hoping someone knows a solution. I just moved to Premiere Pro and this issue might make it a non-starter for me.
    Any thoughts would be appreciated.

    Update: I just happened happened to have a pair of ath m50s lying around.... put them on and I can see that in the multi cam sequence, I can hear only out of the left ear... once I drag and drop something to my timeline the audio's good again...
    Sorry for this question... operator???
    I shoot tech videos on YouTube and I edit my own videos, so I guess I am the operator & observer here...
    Am shooting a tutorial...
    Cam 1 - My Camcorder that shoots the phone
    Cam 2 - Actually a screen recorder that records the steps on screen & audio from webcam
    Audio - Blue Spark Digital recording to audacity
    Now if I merge Cam 1 & Audio or Cam 2 & Audio alls fine... I can check the audio meters and everythings the same as before
    But if I create a multicamera sequence then the audio output is about 20% lower (and no Premiere's not using the audio source from Cam1 or 2 here since they are too low and am 100% sure its not either of those)
    I guess am messing up something but am unable to identify what..
    Syncronize Point - Audio
    Track Channel - 1
    Sequence Preset - Automatic
    Audio Sequence Settings - Camera 1
    Audio Channels Preset - Automatic (or Mono since my Blue Spark records in mono)
    Camera Names - Enumerate Cameras
    Any Idea where am messing up?
    Ash
    Message was edited by: C4ETech

  • Monitoring sound during dubbing

    Attempting to dub sound from audio recorder to garage band. Can't hear sound during dubbing. Why?

    http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
    (Let the page FULLY load. The link to your answer is at the top of your screen)</p

  • Color adjustment on Multi-cam clip in 10.1 not working and crash the app

    In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
    However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
    Anyone having similar issue?
    Any solution?

    In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
    However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
    Anyone having similar issue?
    Any solution?

  • Multi Camera editing & stuff

    I'm hoping to try something new if it is possible.
    I want to edit a recorded multi camera sequance as though it was a live transmission i.e. have 'monitors' showing the various synced video sources. I'm not sure if this is possible with Adobe (I have the master collection).
    If it isn't possible could someone advise on the best way to edit from 4-5 camera set-up (the cameras are set-up and are unmaned during meetings/ events).
    Whilst I am posting I slip in a cople of simple questions. How do I clean my hard drive of old files (my C: drive is rapidly running out of space although all projects etc should be stored on by D: drive)? Is it possible to export back to a similar encoded file as originally captured from DV tape. Un compressed DV yields a data rate too big to handle easily (300mbps) and MS DV is much smaller (3mbps) - the original capture was just under 40mbps.
    Thanks for any help you can offer

    Hi chaps, thanks for responses.
    Just to clarify my hardware is a home built PC with a i7-950 processor corsair SSD 256gb system drive and 2 raptors running raid 0 as by data (D:) drive.
    I have read the help files about multicam view but unless I'm missing something you can only view one feed at a time. What I want to do is show all four syncronized feed running in real time so that I can choose which source I want.
    All captures except 1 are from DV cameras (import via firewire - no problems) the other is a digital camera which uses the MP4 format (not so easy - problems encoding).
    It would appear that if I tried to save the produced 1 hour video in uncompressed DV format the file would be just over 135gb!! (300mbps x 60 x 60 /8).
    The captured files are about 13gb/hour.
    Is there a better way to save the media for possible further editing i.e. a different encoder?
    Thanks for your help

  • No sound in mulit camera edit. CS3 premeire pro

    Followed instructions exactly on tutorial disc for syncronizing clips.
    I have 2 .avi clips with the sound dis-abled and a .wav file with the sound enabled.
    All three clips have been syncronized and multi cam edit has been enabled.
    In multi camera edit window: When playing there is NO SOUND.
    My OS is Windows XPpro
    I am using CS3 production premium.
    Why is there NO SOUND?
    Thanks, Scott
    [email protected]

    Hurray!
    I unlinked Video/audio 1 and deleted the audio track 1.
    I then moved the .wav file in Audio 3 into the now vaccant audio track 1. Making sure to have the audio selected for that track.
    IT WORKED. IT WORKS. I NOW HAVE AUDIO IN MY MULTI CAM EDIT WINDOW. The audio ( .wav file ) that I want to use.
    Thanks for jarring my brain in the right direction. I can now FINALLY finish the wedding video.
    They will be so so happy to finally receive it.
    Thanks so much Stan.
    Date: Sun, 16 May 2010 13:12:21 -0600
    From: [email protected]
    To: [email protected]
    Subject: No sound in mulit camera edit. CS3 premeire pro
    I hear you, but I don't see how that work flow could have ever worked in CS3 (or other versions - I'm still CS3) unless the .wav is in Audio 1.
    In addition to my suggestion above, I suppose you could put the wav in track 1 with no video in v1; and put the cams in v2 and 3.  Keep the audio set to NOT follow cams, and then select between cam 2 and cam 3 for the video.  It won't matter whether you mute tracks 2 and 3; you won't hear them anyway.  You should hear only track 1 audio.
    Here's the CS3 help file:
    http://livedocs.adobe.com/en_US/PremierePro/3.0/index.html
    Now I may have to take back what I said.  I see that the help file says that if you select DO NOT follow cam for audio, it will use the audio in the selected track.  So perhaps you used to select that track (I assume audio 3) and do not have it selected now (in the multicam source sequence).
    >

  • Help with multi camera editing in Premiere Pro

    Ok I'm new...so bear with me.
    I am editing a basic interview shot on two cameras and cutting away to some still images.
    The rushes are 4 lots of film about 10 mins in length.
    I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
    So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
    Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
    I am a bit confused about creating clips v creating sequences.
    I'm sorry if this is making some of you cringe :/ ....but I really can't find any help in online tutorials.
    I need basic step by step instruction.

    I am editing a basic interview shot on two cameras and cutting away to some still images.
    The rushes are 4 lots of film about 10 mins in length.
    I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
    So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
    Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
    humm, sounds like your 4 lots do not overlap in time, and that there is space between each lot. So would that be 4 multi-camera sequences with the two cameras?
    If so, why even multicamera edit that? and just set up to Video tracks, sync the audio and opacity keyframe between the two tracks.
    Good to get your multi-camera edit workflow going proper though.
    Sounds like you need to multi-camera edit your 4 sequences separately, unless you sync each lot with its corresponding clip and put on the same timeline, then do one sequence and one multi-camera edit

Maybe you are looking for

  • How to get and delete questionable mail without actually opening it first.

    I am new to Apple again, having bought my first Apple many years ago (an Apple 2C). Does anyone know if I can get mail and delete it without opening it first? If so, I am thinking it is somehow in Preferences but I cannot figure it out. I often get m

  • Save page input to a file

    Hi, I have a task where a user should be able to save the nput on a page to a file. The page contains a form and a tabular form. The user must also have the possibility to upload the saved files and save the corresponding data to the database. This o

  • Need to setup a liability GL as  inventory revenue account

    Dear All, Is there a way to setup a liability GL as inventory revenue account? When I setup GL by item level then go revenue GL for either warehouse, I can only select revenue account. But some of the revenue GL should be liability account. Our consu

  • How do I stop highlighting in Notes

    iPad 2 iOS 8.2 I've known for some time that whenever I include a date or address in a note, it automatically highlights w/ gold color and an underline. I'd much prefer to be able to undo that highlighting for printouts. How is that done? Can it be d

  • 2.1 EA Bug: group by auto complete generates group by for analytic function

    Hi, when using an analytic function in the sql text, sqldeveloper generates an automatic group by statement in the sql text. Regards, Ingo