I can't enter to the internet using wifi, i do all the steps . You gave us in the Apple page but i still having problema, I can't enter to the internet using wifi, i do all the steps . You gave us in the Apple page but i still having problema

I can't use the wifi in my iPod when I want to enter to a page it tell me that safari can't connected to the internet

Try:
- Resetting the iPod. Nothing will be lost.
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Powering off and then back on the router.
- Resetting network settings: Settings>General>Reset>Reset>Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • TS1398 my ipod touch won't join the wifi network even after entering correct password. it just keeps trying to join but I can't use internet

    My home wifi is working for all my other apple devices but my daughter's Ipod Touch won't connect. It recognises the network and attempts to join it as usual but it just keeps 'trying' without actually connecting. Have switched on and off, renewed lease, reset networks etc - basically everything I can think of but no luck. Any help much appreciated.

    Try restarting your router, if you are still having problems try resetting your network settings.  Go into your settings>reset then tap reset network settings. 

  • When connecting to the public wifi cannot receive mails, either use internet

    when connecting to the public wifi cannot receive mails, either use internet

    I believe I may have solved this
    When you can't log into public WiFi ...
    with an iDevice…
    because the Server times out ...
    or the login/registration page just won't load ...
      ********Simply do this***********
    Go into settings> WiFi and tap the little info icon for the network you are trying to join
    If you see two slider buttons, these are the cause of your woes
    One says "Auto Join" (or similar) - you can leave this ON
    The second button is "Auto Login" - you must turn this OFF (slide it left so it is grey not green)
    Now go back and reselect the network.
    If the login page doesn't come up automatically, open a Safari window and enter any address
    Bingo!
    I have reproduced this issue and solution in 100% of the public WiFi spots which I could previously not access. Please not that I also have "Block Pop-Ups" turned OFF in Settings> Safari, though I do not know if this is a necessary step.
    I have filed a bug report with Apple. Feel free to contact them yourselves if this workaround works for you.
    Peace y'all
    <Edited by Host>

  • My mac book appears to stops other computers using the same Internet from accessing the wifi

    I only have this problem when I come home to my parents house. Never had had this problem when at a home shared with 5 others all using the same wifi. But when I come home and connect my Mac book to the wifi and let's say watch netflixs, it will prevent all other devices (pc, iPhone, ipads) from getting an Internet connection. Just wondering if there was something in my settings that was making this happen.

    Most often BitTorrent, iCloud, Dropbox, or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least iCloud Drive in its preference pane and see whether there's any change. If you use third-party network backup or file-sync software, disable that. If you use a torrent client, remove it.
    Otherwise, if you're running OS X 10.9 or later, you can see which processes are most active on the network.
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select All Processes from the View menu, if not already selected, and also select the Network tab.
    Click the heading of the Sent Bytes column in the process table to sort the entries by bandwidth usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Repeat with the Rcvd Bytes column.

  • My iPhone 5 won't use 3G when 4G isn't available. I live in the middle of nowhere, but with my iPhone 4 I could use the Internet on 3G just fine. Now I don't get anything unless I'm on wifi. I have AT

    My iPhone 5 won't use 3G when 4G isn't available. I live in the middle of nowhere, but with my iPhone 4 I could use the Internet on 3G just fine without needing wifi. Now I don't get anything unless I'm on wifi. My phone says '4G' but then says 'could not activate cellular data' or gives me the gray google failed because you dont have internet page. I have AT&amp;T if that matters. I just want to get Internet and my email like I used to be able to. Slow 3G is fine with me, but I need it to work on my iPhone 5. Can anyone help me?

    Oh ok, thank you! So I just got a bum SIM card when I bought this phone or something?

  • How to connect an apple tv to an enterprise network with a username and a password?   I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    How to connect an apple tv to an enterprise network with a username and a password?
    I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

  • Safari of my Macbook (on WiFi) suddenly fails to connect to the Internet.  A popup window message says another device on the network is using my computer's IP address.

    But then there was still no Internet access even after I have disconnected all other home computers (a total of four including the Macbook and one iMac desktop.  For simplicity, I shall categorically called them Mac hereafter unless otherwise specified.  The Macs are operating on WiFi.). 
    The window message recommends changing the IP of either the Macs or the other device.  The latter of course does not apply because I don't think the other device is one of my computers. 
    My questions:  
    (1) Why did that happen suddenly since the Mac and other computers on the WiFi was working fine in the morning (as well as days before) and then all of a sudden an unknown device is using my computer's IP?  As far as I (we) can remember, we did not do any thing unusual this morning nor had we downloaded any special programs.
    (2) How do I change the IP since it requires Internet acess to do it and since I can't access the Internet on the Mac? 
    (3) I am almost sure the problem is not caused by the Internet service because when I connected the Ethernet cable from the DSL modem to an old Windows PC, I got Internet via Internet Explorer.  [I am actually sending out this message via IE on my PC.]  However, when I cennected the Ethernet line from the modem to a WiFi router (Airport Extreme) and then connect the router and the old PC, I did not get Internet on either the Mac nor the PC.  Similarly, there was no Internet on both Mac and PC If I connect Ethernet only between the modem and the router but not between PC and router.  So, the question is whether a third unknown party has gotten hold of my Mac IP address and is trying to break into the Mac?  Can it steal my personal info?
    (4)  How can I repair the Mac now and prevent future recurrences?  Is changing the IP address the way to do it?  (But like I said before I had tried but could not change the IP because I did not have Internet access on the Mac.  Is there an alternative method?) 
    (5) I wonder if a computer's IP address remains constant if you don't change it.  The reason I am asking this question is because the aforesaid window message on the Macbook--not sure about the iMac--shows a different IP address--a few numerical digits were changed--almost every time it pops up following every failure trial of mine to access the Internet.  Was the Macbook trying to change the IP for me or was there some thing not right?

    Re: Another device on the network is using your computer's IP address.
    This message/problem was occuring intermittently for me in a household with two MacBooks accessing one Airport extreme.  Rebooting the modem and router would only temporarily fix the issue for me, so I spoke with a friend who works for Apple and it seems that the Airport Extreme settings were at the root of our particular issue.
    The router(Airport Extreme) recieves only one IP address from the modem and in order to allow it to share the IP address with two computers at once, the solution in my case was through:
    Applications>Utilities>Airport Utility>Manual Setup>Internet
    under Internet Connection- Select "share a public IP address"
    under NAT, check the box for "enable NAT Port Mapping Protocol"
       (this will allow the sharing of one public IP address with multiple devices)
    if this is a new setting, then click "Update" and the Airport Extreme should reboot itself with new settings applied.
    When all else is working properly, this is a satisfactory solution in my case.

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

    Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

    Hi SandyS_VZW,
    Yes tried resetting the wifi connection and problem still persist.
    Here it is...to make it clear. Connected thru the same wifi at home...
    -> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
    -> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
    THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
    My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
    Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
    Was there a known issue similar about this case?
    thanks,

  • HT3819 Hi there. If I use "home sharing" on the same wifi network, does it use internet data, or only sharing over a home network?

    Hi there. If I use itunes over home sharing in my house on 2 pc's, does it use data from my internet, or does it work over local home network?

    You'd need both computers to be connecting to the same wifi network in order to Home Share.

  • How to use an iPad 2 for web search (via 3G only) while using AirPrint via Airoprt express wifi (NOT connected to the internet)

    Heres the setup: I have an IOS 7 iPad 2 that I want to use 3G only for web searches/ emails while using an Airport Express generated wifi bubble (without any connected internett) to print web seraches via airprint to a wifi printer.
    The problem: the ipad deafults to searching via the AE's wifi and vainly waits for the non existent interent to connect. It ignores the available 3G internet.
    The workaround: a) turn off the AE's wifi, search the web via 3G b) once I have something to print, turn the wifi back on and print via airprint and the AE's wifi to the printer.
    The question: Is there a way to turn off the AE's internet access. Using Airport utility, I have tried setting Bridge mode and static IPs to no avail. There is no turn-the-internet-off tick box.
    In the ideal setup I would like the ipad 2 to search the web via 3G only (straight away versus waiting vainly for the AE to find it!!) and then print the results via the AE's wifi and airprint without having to toggle wifi on and off all the time.....
    Thanks in advance,
    Bill...

    Hi,
    You can consider to configure the Forefront TMG Arrays or NLB.
    Planning for Forefront TMG server high availability and scalability
    http://technet.microsoft.com/en-us/library/dd897010.aspx
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

    Hello all.
    I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
    I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
    Is anybody able to help me please.

    You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
    You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

  • How do I use my ethernet connection for printing on my LAN and use my Wifi on a different router and ISP to connect to the internet?

    I'm in a small office, and I have to use my ethernet connection to connect to the networked copier to be able to print, but connection to which I hooked my Time Capsule is literally 20x faster when connecting to the internet.
    How can I tell the computer to use the ethernet connection to print, while everything else should go through wifi?
    I have been manually going back and forth changing the order in Network Preferences between ethernet and Wifi, but I'm know there must be an easier way.  Thanks for your help!

    A packet going to Apple is not local. It is going to 17.149.160.49  -- So it is sent to the topmost working connection to be Routed and sent to the Internet.
    A packet going to a local computer or other device that is on the same subnet (has an IP address very close to the topmost IP Address of your computer) gets sent out that port as well, but is sent directly to that computer on the local subnet, since no Routing [changing of Addresses} is needed.
    A packet going to a local computer or Printer or Network Attached Storage device that is not on the topmost subnet, but is on a secondary subnet such as the second network connection would be sent directly to that computer, since no Routing is needed.
    I do not understand why two Routers have the same IP Address if they are not cross-connected. That makes everything very difficult when it should be simple.

  • My Apple Macbook Pro is connected by Telstra wireless Broadband to the Internet. Is it possible to connect to a WiFi Printer using Air Express or some other system? to the Internet.

    Hi
    Can someone please advise if it is possible to connect my Apple MacBook Pro 13.3" to a WiFi Printer, as I am connected to the Internet through Telstra Wireless broadband.
    Is it possible by using Airport Express or some other way?
    Thanks

    1.Power Cycle
       Power off the router. Unplug it from the wall. Wait a while.
       Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
       It will take a while.
      Restart the computer.
      Start up in Safe Mode.
       http://support.apple.com/kb/PH11212?viewlocale=en_US
    2.  Turn off Extensions, if any.
         Safari > Preferences > Extensions
    3. Turn off proxies, if selected.
         System Preference > Network > Advanced  > Proxies Tab
         Under "Select Protocol", uncheck any box if selected.
         Click "OK" then  "Apply"
    4. Uninstall anti-virus software, if any.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273

  • HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud.  Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

    Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud. 
    Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Maybe you are looking for

  • ICloud calendar no longer syncs to Outlook 2010

    I am putting appointments on my iPhone 4 and they post to iCloud, but they will not post to Outlook 2010 calendar. When I click Refresh button in Outlook to refresh the calendar from iCloud, nothing happens. I have my iPhone set up to sync calendars

  • Trouble mounting external hard drives to my Macbook after restoring it to factory settings. Solutions??

    I just restored my Macbook Version 10.4.11 to factory settings because I heard that it is good to do that to clean it up. I had saved everything on a WD My Book 1110 Media, but now when I try to retrieve the stuff on there, the WD won't even mount. T

  • [solved] Nautilus freezes when opening "properties"

    Heya, unfortunately I can no longer open the "Properties" dialogue when right-clicking on any file in Nautilus. Nautilus just freezes and sometimes Mutter notifies me about the freeze and asks if I want to kill nautilus. When opening Nautilus in a sh

  • J1IH ---- Excise JV

    Hi Gurus, In Tcode J1IH, while saving, system is showing following error (Message no .KI281) "Do Not assign any objects in cost accounting to account 272043" Account 272043 is my Balance sheet account. System response is as follows "Auxiliary Account

  • Rendering squashes video/Crash

    I have been using CS4 just fine using HD footage from 5D/7D. I usually render everything and begin editing the HD files, however during the last render another program was updating DirectX... After the render finished, the preview monitor shows the v