I can't find application loader after installation

I have not installed the Xcode, but instead installed the dmg application loader. But I can't find it within the my Applications or Utilties. Any idea where it is, or how to run it from the command line?

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

Similar Messages

  • Can't find live type after installation

    I reinstalled FCP and components and now I can't find Live type anywhere in the computer. Even I tried to reinstall the live type data and at the end of installation a message says "intallation was succesfull". What can I do to recover it?
    Thanks in advance.

    What have you done to find it? Spotlight will find LiveType. The installer is a very simple application, not very bright. If it says it installed it, it's there someplace. Search for recent creation dates and huge folders.
    bogiesan

  • Can't find photoshop cc after installation

    just downloaded photoshop cc from the cloud and i can't find it anywhere on my pc.  i installed premier pro and after effects on the same computer without problems.  any ideas? thanks.

    Did you look in
    C:\Program Files (x86)\Adobe\Adobe Photoshop CC
            or
    C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)
    and then look for the Photoshop.exe
    Usually after installation it should be listed somewhere near the top on the All Programs menu.

  • I can't find ios partition after installation of Windows 7 via boot camp. can someone help please?

    I installed Windows 7 via boot camp and now I can't find my Mac partition. My commuter boots up to a blank gray screen and after several minutes the Windows partition starts. I don't know what to do. Can someone help me?

    In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
    and Boot Camp: Install or repair Boot Camp drivers.
    The other option is to use
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    How to Reset NVRAM on your Mac - Apple Support

  • Can't find Application Builder after installing AB 7.0 in a LabView 7.1 system

    Hello, I just installed applivcation Builder 7.0 on my windows desktop (XP, SP2) that has already installed a Labview 7.1. But nothing happens...I just can't find it. Not on "Werkzeuge" (Tools) or anywhere else in the application.
    Only in the explorerI can find Labview7.0\Applibs...
    I reinstalled it 3 times now...what else can I do ?
    or does the Application Builder 7.0 not work with LV 7.1 ?
    any help would be appreciated
    regards
    fluxgate

    No, it does not work. You need the 7.1 app builder. If you had purchased the 7.0 app builder separately (and not as part of the profession version), when you did the upgrade to 7.1, you should have requested the 7.1 app builder. Since 7.1 is no longer sold by NI, I'm not sure how you can get the correct app builder. You should contact NI directly or your local field engineer.

  • Time Machine can't find external drive after installing Lion

    Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro  says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

    Does the drive work when just directly connected? If so, have you prepped the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Where can I find my mountain lion installer included with 2012 mac mini

    I just bought a 2012 mac mini and I want to install mountain lion on an SSD that I bought separately.  Where can I find the mountain lion installer file to create a bootable USB install drive?  When I go to the mac app store, mountain lion is not listed in my purchases and when I try to buy it, it says "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer."  It's already installed on the mac mini, I just need the installer file so I can install it on my SSD.

    keg55 wrote:
    You might be able to simply boot into the ML Recovery HD, select Reinstall OS X and point to your SSD drive. You won't capture the InstallESD.dmg file to create a USB thumb drive installer.
    OR.... to create a USB thumb drive of your pre installed ML, you would need to redownload Mountain Lion then grab the InstallESD.dmg file and create your USB thumb drive.Here is how I've done it using Internet Recovery to get my pre installed OS X.
    Attach a USB external drive to your system. Formated as Mac OS Extended (Journal) and GUID partition table.
    Restart using Command+R+Option to boot into Apple's Recovery HD. This will get you the original version. Or just Command+R to boot into your ML Recovery HD.
    Select Reinstall OS X from the OS X Utilities menu.
    You will  have to watch the download. After it completes and your system restarts, at the black screen disconnect the external USB drive.
    After you are back to your current desktop, insert the external USB drive. There should be a single folder on the drive called 'Install Data' (I think). Find the InstallESD.dmg file and copy it to a folder on your current system (Downloads, for example).
    Follow any of the internet instructions to create a ML USB thumb drive.
    I tried this method, and while it did get me the installer image, when I restored it to an external and tried to use it to restore a Late 2012 Mac Mini, I got the same "No" symbol I did with other ML installers.
    Here are some screenshots of what was loaded onto my external before I yanked it, when the screen turned black durring the restart. The highlighted file is what I restored to my external to use to restore the Mac Mini.

  • Quicktime 7.0+ with Vista = error 46: can't find or load quicktime activex

    For awhile, Quicktime Pro was working on my 32bit Microsoft Vista PC that I built, then sometime around 7.1.5 Internet Explorer would no longer play Quicktime files in my browser. No biggie, but then after 7.1.6 it would not longer load at all. I keep getting Error 46: Can't find or load Quicktime ActiveX control.
    If I try launching Quicktime as the administrator, I still get the Error 46. And it just won't load. Even Sony Vegas Video won't render Quicktime files as that gives me an access violation.
    I managed to find a Quicktime 7.0.1 installer, so I deinstalled 7.1.6 and installed 7.0.1 and all was well again. The program would launch and play Quicktime files and Sony Vegas Video would render Quicktime files again.
    But as soon as I rebooted...Error 46 again...even after downgrading. Something's going on with the permissions and I cant seem to fix it.
    The one shining light with 7.0.1 is if I launch it as an Administrator it will work after rebooting. But only if launching it as an Administrator.
    7.1.6 will not do this. It will error everytime regardless of launching as an admin or not.
    Anyone have any ideas how to solve this? And does anyone know if Apple is working to solve this issue? Hopefully this isn't too limited of a bug, otherwise I might be in for a long wait for a fix.

    Hi, all
    I thought I would post the link to another thread where I got this working on my machine.
    http://discussions.apple.com/thread.jspa?threadID=948432&tstart=15
    Hope this helps.
    Thanks,
    David Eaton

  • Can't find home drive after reinstallation of O.S.X

    Dear friends,
    I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
    finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
    It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
    Headache! Please advise ASAP.
    thank you,
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
    Reply Email
    what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
    sudo chflags 0 /
    you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 7:11 PM in response to: V.K.
    Reply Email
    dear V.K.
    When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
    is there any other options to try out?
    many many thanks
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
    Reply Email
    run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
    ls -ladeO /
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:03 PM in response to: V.K.
    Reply Email
    I run the command as follows.
    Last login: Tue Nov 3 11:04:49 on ttys000
    cjunxing:~ junxingchen$ ls -ladeO /
    drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
    cjunxing:~ junxingchen$
    pls advise
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
    Reply Email
    these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 1:11 AM in response to: V.K.
    Reply Email
    hi, V.K.
    after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
    Can you please instruct again.
    thank you.
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
    Reply Email
    aha, so it was a hidden flag after all. then run
    sudo chflags 0 /volumes/*
    you may need to restart after that to make the second drive show up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 5:33 PM in response to: V.K.
    Reply Email
    Dear V.K,
    I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
    Pls guide me.
    thanks
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
    Reply Email
    sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

    I don't have a source attribute for this (maybe I wrote it myself!):
    There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
    If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

  • I can't find application " viber " and "tango" in mac app store ., I can't find application " viber " and "tango" in mac app store ., I can't find application " viber " and "tango" in mac app store .

    I can not find applications "viber " and "tango" in mac app store .

    I am running snow leopard
    James....
    You arne't necessarily doing anything wrong.
    Install the Mac OS X 10.6.8 Update Combo
    That should reinstall the App Store for you.
    Restart your Mac after the combo is finished installing.
    You should see the App Store icon in the Dock and be able to access from your Apple menu also.
    Make sure your Mac meet's Lion's requirements

  • Where can I find primier CS5 trail installation?

    Hello,
    I'm a studnt. has a 32 bit computer
    looking for a trail version that will feet my computer.
    where can I find primier CS5 trail installation?
    best regards,
    nana

    You would need CS4 to be compatible with a 32-bit operating system.  That being said we no longer have the trial of Premiere CS4 available for download.  If you purchased CS5 or 5.5 or purchase CS6 there is an option to obtain a copy of Premiere and After Effects CS4 depending on which software package you purchased.

  • Can't find my loaded content on itunes

    just got a computer with windows 8.  Started loading my albums to my itunes library.  All of the sudden I can't find my loaded content and can only see my purchased music in itunes.  It is still on the computer but I can not see it in itunes

      Thank you.  I see what you mean, and I'll use your method when I need apps. 
      For syncing my phone, however, I am automatically sent to the iTunes page, and to the sync/device screen I want.   After I sync, though, it's gone and I can't view my other details.  The only reliable way back there is to unplug the phone and plug it in again.  Fair enough, I guess.  But, weirdly, the little phone icon does sometimes show up (by the menu upper left) and will let me back in, but there's no rhyme or reason to when or why.  It's funny - kinda like some random game of Whack-a-Mole. 
      I appreciate you taking the time.  Cheers, -- Gordon180

  • Can't find Application Support for Address Book in Lion. Any ideas where to go?

    I need to re-establish my Address Book after iCloud doubled all of the entries in it. But I can't find Application Support for Address Book in Lion.
    Can someone help?

    Go menu -> Go to folder.
    Enter ~/Library
    And select Go.
    Your contents will now be visible.  
    WARNING: messing around with these contents without at least twice backups may make your data inaccessible or worse if you don't know what you are doing.

  • Lync 2013 "Setup can't find or validate an installation file...."

    Enterprise client installation.
    We're running Windows 7 32bit SP2, Office 2010 32bit SP2.
    Attempting to run the install for Lync 2013 (32-bit) on a test system and get the following warning immediately:
    "Setup can't find or validate an installation file.  Please try installing Office from your installation source, or if you installed from a downloaded package, please re-download and re-install....."
    The source Lync 2013 file is direct from MVLS.
    Any reason why this install from MVLS refuses to run from the source?  Obviously, Lync 2013 wasn't included with Office 2010, so re-installing Office won't resolve this issue.
    Any help is appreciated.

    Hi,
    It may also cause by the issue of the conflict with other software, please use clean boot to test the issue. In this mode install Lync 2013 file again.
    You can refer to the link of “How to perform a clean boot in Windows”:
    http://support.microsoft.com/kb/929135
    If the issue persists, please also try to download Lync 2013 file and install again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

    I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

    If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

Maybe you are looking for