I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

i can't get any sound to work on my iphone 4s unless the headphones are plugged up

http://support.apple.com/kb/TS2802

Similar Messages

  • I can't get any sound to work on my ipod touch

    I cannot get any sound on my ipod touch. When I am listening to music the volume bar is not visible and when I am on my apps it says no volume available. Anybody have any suggestions on what I can do to fix this?

    Here is what Apple Says: http://support.apple.com/kb/TS2771
    No sound through internal speaker*
    Verify that the iPod touch is not set to pause.
    Verify that the volume is set appropriately.
    Verify that headphones are not attached to the headphone port.
    Verify that Bluetooth stereo headphones are not paired wirelessly.
    Try turning the iPod touch off and then on again.
    No sound through headphones*
    Verify that there's no debris in the headphone port.
    Plug and unplug the headphones. Reconnect headphones and verify the connector is pushed in all the way.
    Check the volume setting on your iPod touch.
    If you are trying to listen to music and cannot hear any audio, make sure that the music is not paused.
    Make sure the latest version of iTunes is installed on the computer that you are syncing the iPod touch with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
    Try another set of Apple headphones.
    Try a different song or video.
    Check other content, such as videos, to see if they exhibit the same audio issues.

  • HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter.  How do I resolve this?

    I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
    The phone gets WIFI from AT&T.  My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router. 
    That must be the problem.  How do I resolve that?

    For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
    Can you connect your iPhone to the Netgear router WiFi?

  • Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

  • [SOLVED] Can't get any sound working at all

    I've just installed Arch again on my MacBook 5,2 and I can't get any sound (speakers or earphones) to work. I've tried the ALSA wiki page for troubleshooting, but none of that has worked. Does anyone have any ideas where to start with this?
    Last edited by dave1022 (2011-05-07 15:04:31)

    When you try something and it doesn't work, post the commands and the errors you get here, so that someone can actually help you with your problem.
    Please help us help you.

  • Can't get ac3 sound to work

    I have rent a movie and cannot get ac3 to work properly.
    I have rent movies before so it's nothing wrong whit my computer. But this time I can't get any sound at all is it to do whit iTunes update I am running the last update for iTunes.

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • I can't get any sound out of iTunes when i play a song.

    Ever since i upgraded iTunes i can't get any sound out of it. The player shows the bar moving through the song but nothing is heard.

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My phone thinks the headphones are plugged in and I can't get any sounds.  How to fix?

    My iphone 5 thinks that the headphones are plugged in and they are not.  I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones.  Any ideas on how to fix?

    I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.

  • Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites!

    Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites.  Advice please!

    Check System Preferences > Flash Player > Advanced
    Click:  Delete All under Browsing Data and Settings
    Then empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show develop menu in menu bar
    Now click Develop > Empty Caches
    Quit and relaunch Safari then try Flash on a website for sound.

  • I can t get any sound notication sounds on my ipad 2 such as new email etc

    I can t get any sound notication sounds on my ipad 2 such as new email etc

    You need to turn off the mute.  The side switch is the key.  Depending on your settings, it may affect the mute or it may affect the rotation lock.  This support article from Apple provides detail.
    http://support.apple.com/kb/HT4085
    In case you're wondering, here is the history.  Originally, the mechanical switch affected only the rotation lock and the mute was a software switch elsewhere.  In IOS-3, it was changed to be the mute switch and the rotation lock became a software switch.  This was done to ensure consistency among IOS devices.  Unfortunately, a large quantity of users complained loudly, alleging that they turned the rotation lock on and off several times every hour and the convenience of the mechanical switch is essential.  In IOS-4, Apple bowed to the whiners and made the switch function selectable and now we're stuck with a mess.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I can't get any sound from ITunes. The computer's internal speakers are fine (they play utube sound, for example). And the sound bar on itunes is all the way to the right. Still no sound from the music library. Any insights?

    I can't get any sound from my ITunes library. The IMac is set to internal speakers, the volume bar on ITunes itself is all the way to the right, there seems to be no problem with the speakers themselves (they play sound from internet videos, for example), but I can't play music from the ITunes library on the IMac. Please help!

    Is it possible that you have iTunes set to send audio through AirPlay to an AirPort Express, Apple TV, or other AirPlay device (which is itself not turned up so you can hear it)?

  • I can't get any sounds from my ipod, only through earphones

    I can't get any sounds from my itouch. I can only hear through my headphones. I completely reset my itouch and still nothing

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem. I do not know what you meant by "completely reset my itouch".
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar

  • I have a brand new Nano Ipod 7th Generation.  I can't get any sound out of earphones.  Yes, have pushed the cord all the way in.  Screen shows tunes are playing, but I can't hear anything.  Volume bar shows volume all the way up.  Now what?

    No sound out of earphones.  Yes, cord is all the way in the jack.  Screen shows tune is "playing", but I can't get any sound out.  Help

    If this is the case, I recommend to visit Apple store to request for replacement. Cheers!

  • I can't get any sound through speakers with monitoring on either - using imac with guitarlink audio interface

    I can't get any sound through my speakers with monitoring on - i'm using a behringer usg102 audio interface and garageband is recognizing the input - i just can't hear the output - any suggestions?  thanks!

    vickyfromla quinta wrote:
    i have the usb selected as the input device
    and the output?
    vickyfromla quinta wrote:
    but it won't allow me to set the input level.  when i try to move the slider, it automatically moves itself back to the far left side.
    that's not the problem:
    http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can't get any sound on YouTube simce September 29, 2013

    I am very said and disgusted, because i cannot get any sounds what so ever on youtube.  I have trIed every thing i am capable of doing....I know googles has been blocking my sent video's from time to time because I like my toutube name and do not want to use my real name...For over three years this has been my name.  This might be the problem, or not...I just want to hear my video's and add to ma place list.  Someone please HELP ME!

    I understand you can't get any sound on YouTube since September 29, 2013.\
    If you do a System Restore it should fix what changes took place on or before that date.
    If I were to do the Restore I would take it to the 27th of September, that way you will be sure to correct the issue. Follow the link for how to options.
    Windows 8
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    Windows 7
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    I hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for