I can't get my Kodak Wi-fi printer to work with my Mac

Hi there, I've just taken delivery of my new iMac and loving every minute! However I can't get it to work with my Kodak ESP 3.2 Wi-Fi printer. When I try to set it up, it recognises the printer but doesn't have the drivers available in its list. When I download the (apparently correct) drivers from the Kodak site, they wont load on to my machine. Do I need to buy another printer? - this one is only 6 months old!!
Thanks all

Decision made! I've bought a HP printer. Having reviewed a number of forums and asked around, it was obvious that there was no easy fix - anyone want to buy a Kodak printer??

Similar Messages

  • I can't get my Kodak ESP 7 printer to work with OS X how do I fix it?

    I just downloaded OS X Yosemite and my Kodak ESP 7 all in one printer stopped printing from Safari.  I've gone through all the maintenance steps to update my driver and check internal printer problems and I get good test prints from the tests but noting will print from mail or Safari. How do I fix it?

    Software update Yosemite for Kodak ESP 7
    KODAK ESP 7 / ESP 9 All-in-One Printer Firmware - MACINTOSH Operating Systems
    Go to:
    http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CDsQFjAD&u rl=http%3A%2F%2Fsupport.en.kodak.com%2Fapp%2Fanswers%2Fdetail%2Fa_id%2F36454%2F~ %2Fkodak-esp-7-%252F-esp-9-all-in-one-printer-firmware---macintosh-operating-sys tems&ei=VgF_VNz0O4yBPf7egcAF&usg=AFQjCNF6y3HrsKLZnDJqmge3iRsvBN1Q2g&bvm=bv.80642 063,d.ZWU
    1. Below Quick Search type in: Yosemite
    2. Enter
    3. Click on:
    Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?
    The following page appears:
    Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?
    Do the following steps to address the issue:
    1. Go to Spotlight (top bar - click on 2nd icon from right), type in the word Terminal and press Enter.
        The terminal window/program opens.
    2. Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
    3. Enter your system OS login password when prompted.
        Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
    4. Enter sudo launchctl stop org.cups.cupsd

        Your screen will look similar to the following:
    Last login: Mon Nov 10 16:34:57 on console
    Macintosh:~ lindaterry$ sudo sh -c 'echo "Sandboxing Relaxed" >>  
      /etc/cups/cups-files.conf'
    Password:
    Sorry, try again.
    Password:
    Macintosh:~ lindaterry$ sudo launchctl stop org.cups.cupsd
    Macintosh:~ lindaterry$
        Try to print again. If the issue continues, contact us for further support.

  • Can I get my HP F4500 wireless printer to work with my Ipad?

    Can I get my HP F4500 Wireless Printer to work with my Ipad....It is an IOS 4.3.2

    Philip-
    I don't see a 4500 HP printer on the list of AirPrint printers, so you will most likely need an alternate way to print to it.
    One way is to use an iPad App such as Print n Share.  It has its own browser, mail, photo and text programs that can print to some non-AirPrint printers.  I don't know if it can print from within other iPad Apps.
    Another way is to use a computer to share the printer as AirPrint over WiFi, using a program like Printopia for the Macintosh.  For a free solution, search the web for AirPrint Activator.
    I recommend you try the free iPad App, HP iPrint Photo.
    Fred

  • I can't get my new samsung hard drive to work with my mac and tv

    I bought my first ever hard drive today. It is a Smasung M3 Portable 1.5 TB.
    At first I plugged it in and it wouldn't let me drag anything from finder over to the hard drive. I did some research (googling) and followed the steps to change the format to 'Mac OS extended (Journaled)' which allowed me start dragging files across.
    I then put a movie on the hard drive, waited for it to copy then plugged it into my TV (hoping to sit back and watch said movie). However the TV would not let me even open the hard drive.
    I did some more "research" and read that if I changed the format to 'MS-DOS FAT' it would let me use the hard drive on Mac and PC. I tried that but still had the same trouble of the hard drive not working on the TV.
    Basically, I want to use the hard drive as storage/ back up for my files BUT ALSO to put all of my movies on it and plug it into my TV.
    Can someone please help me.
    PS- I am not very tech savvy. I won't be able to do anything too technical.
    Thanks you in advance (:

    maybe this link will help http://www.makeuseof.com/answers/play-media-files-mac-formatted-external-hard-dr ive-hdtv/ unfortunately its for file up to 4 GB size, otherwise try to connect your mac directly to your Tv or I suggest contacting SAMSUNG about this issue, maybe the have assigned softwares for this formatting issues like in western digital for example.

  • I recently bought a new macbook pro and set it up using the migration assistant and my mac mini.  I can't get the text message forwarding feature to work with both computers.

    I recently bought a new macbook pro and set it up using the migration assistant from my mac mini.  I can't get the text message forwarding feature to work with both computers.  It keeps saying that I only have 2 devices setup, my iPad and my macbook pro.  When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device.  I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer.  Any ideas?

    Thanks, Sig.
    The old computer is a 2.6 Ghz Intel Core 2 Duo
    The new one is a 2.3 GHz intel core i7
    In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem.  Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page.  Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
    If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them. 
    (I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

  • I can not get the flash player plug in to work with Internet Explorer

    I can not get the flash player plug in to work with Internet Explorer

    Zoltan71 wrote:
    I just bought this computer. My Internet Explorer is version 11.0.1
    I have the box checked to Install new version automatically, but it has not done any upgrading.
    I can't get the computer to update anything as far as I can see.
    The flash plug in does work with the Crome browser but it will not work with Internet explorer.
    I looked in the manage add-ons and it says enabled.
    I also went into the safety tab and deselected
    Active X filtering.
    Restarted and still does not work.
    I need help.....
    Chrome uses a different and separate plug-in.
    There are things about IE you need to know, especially 11. Specifically:
    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

    I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

    Check out the following & do the necessary: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    What to do when you can't print
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    HP Support

  • Is there a way I get can my Dell V305 printer to work with my Mac?

    I "inherited" my son's Mac Book Pro but when I tried to hook it up to our printer, Dell V305, it wouldn't work.  I tried downloading the software from the Dell site, since we don't have the disks, but it wouldn't work.  Is there a way I can get our printer to work with the Mac?

    I would start by contacting Dell's tech support to determine if the printer is compatible. They may then be able to suggest what printer driver to use on the Mac.

  • Can't get Canon iR-ADV C5250 printer to work on Yosemite

    Can't get Canon iR-ADV C5250 printer to work on Yosemite; keep getting "printer is not responding."
    I did try and install the driver for Mavericks first. I *have* deleted printer and appropriate /Library files. And re-installed using "UFRII_v10.06.00_Mac.dmg" which is the equivalent of what worked on the previous Macbook Air.
    We do use Dept. ID Management. I know how to set that up.  Although we do not use a PIN.  Again in other macs and computers that's not an issue.
    PAHU? :-)
    Thanks!
    David

    Hi David,
    Sorry for the late reply. Printer not responding is typically an issue with the protocol or the wrong network address. Easiest way to check that the correct IP address has been used is to enter the IPv4 address into a web browser on the Mac. This should result in you connecting to the internal web page of the C5250. If this does happen, then you know the IP address used to create the printer was correct.
    As for the protocol, the UFR2 driver supports LPD and HP Jetdirect-Socket. It does not support IPP. And there have been some users who have found even the LPD protocol will not communicate with the printer, so check that you are using HP Jetdirect-Socket. If you cannot remember what protocol was used when creating the queue, then you can open System Information (Applications > Utilities) and then select Printers in the left column. If you have more than one printer on this Mac, the top right pane will list them. Select the C5250 to see its information in the bottom right pane. Then look for the entry of URI. This is the print queue. It should show socket://ip-address, indicating the HP Jetdirect-Socket was used. If it shows lpd or ipp then you know one of the other protocols was used.
    Hope this helps. Reply if you need more assistance.
    PaHu

  • How can I get address book 4.1.2 to work with osx 10.6.7

    How do I get address book 4.1.2 to work with osx 10.6.7

    You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

  • How can I get my Toshiba fingerprint password utility to work with ff4?

    My tosiba laptop has a utility that would remember usernames and passwords, so that I could just swipe my finger and the details would prepopulate - this worked in previous version of ff but not ff4

    Take a look at this page to determine if your model is compatible:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    If you can't get it to work, post back - as long as you can get your memory card to appear on the desktop, you can use something like MPEG Streamclip to convert the video to a format iMovie can work with.

  • Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1

    Hi,
    In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
    "You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
    Where I can get this patch?
    Is it RDBMS patch or OC4J patch?
    I don't have access to a Metalink.
    Thanks a lot,
    Andrei

    Check out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
    Jean-Pierre

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

  • Can't get Apple Laptop built in camera to work with Adobe Flash Player

    Is there any way to get this to work? I'm trying to build an application that will work with both PC and Mac web cams and this won't work. Are there any other choices out there or anyone with experience on this? Thanks

    Hello Brickwell
    Perhaps I misunderstand what you want, but iSight works with Flash Player web content.
    Have you configured your browser's Flash Player settings? If not, try the suggestion from this post:
      http://discussions.apple.com/thread.jspa?messageID=4761707&#4761707
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Can one get a bluetooth plantronics 510 voyager to work with skype?

    I have a Bluetooth enabled Plantronics 510 voyager and was curious to find out if it is possible to work with skype on my macbook. If so, how? If not I guess that's why my macbook is not detecting the headset.

    Yes, any bluetooth really. You have to pair up the Mac and the Earpiece via bluetooth. Once paired, your bluetooth earpiece is a new mic for your Mac. Go into the Skype preferences and select "plantronics 510" as your audio input device and you can set your audio out the same if you want to hear it in your ear, or keep it as your Mac speakers.

Maybe you are looking for