I can't get the printer to accept a different paper size. I'm trying to print on 6.5x10.

I have an HP 8600 All-in-One and am printing from a Mac running 10.6. I changed the page setup to 6.5x10, but keep getting a message that the printer and document paper sizes don't match.
This question was solved.
View Solution.

Hi dawncheryl,
What printing application are you using?
Follow the steps in the documents below, and let me know what you find out?
Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing in Microsoft Word
Macintosh: Using the Paper Type/Quality Panel to Change Print Settings in Mac OS X 10.5 and 10.6
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

How can I get the wireless hardware fixed on my HP photosmart C7250 all in one printer?

I did the test by holding down the # 6 and it said that the wireless hardware needed service. Any advice on where to get it serviced? Thank you!

Hi,
Please use the following link (under "Manage Print Apps" to cancel/remove it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
You may also get this:
My Print Apps
To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
Please also try this (if the above mothod did not help):
http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll=false&destPage=document&cc=us&dlc=en&docname=c031...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have changed my ID on Apple, but it hasn't transferred to ITunes. How can I get the ITunes to accept my new ID?

I have changed my ID on my Apple account (new e-mail address), but it doesn't transfer to my iTunes, so I can't sign in. What do I do?

Nothing transfers to iTunes.
Sign out of iTunes.
Sign in with the new Apple ID credentials.

I changed my Appleid online yesterday because the old one was based on an email address that is no longer active. My phone still shows the old Appleid and will not let me access APP store etc. How can I get the phone to accept the new ID?

I channged my Appleid at appleid.com and now the phone stills shows my old id and will not let apps that require id/password prompts work.

Just scroll to the bottom of the screen in the store, log out and then login with the new ID.
As long as you changed it from the manage account option at https://appleid.apple.com/ (ie. replaced the primary email address with a new one), then all your old purchases should be fine.

How can I get the program to recognize two different types of thermocouples?

I am using a PCI-4351 card with a TBX-68T terminal block. I was having trouble writing and finding a program that would give me more than one reading/sec. I found a program on the NI website called "435x_logger_triggering", and so far it is the only program that I have found that will actually collect data at 60 Hz. Unfortunately, this program only lets you specify one mode for your thermocouples. This is a problem because we are using two thermocouples, one is type K and the other is a type R, so we get bad readings from one of the thermocouples depending on which mode it is set on. I would like to know how I can program in a seperate mode for each channel in this program. Un
fortunately, some of the sub VI's in this program are password protected, so I don't know if this is possible. Everything is entered correctly in the Measurement and Automation explorer, so that isn't the problem. I will attach a copy of the program that I am using. I have modified it slightly from the one I got off the NI website, so that the thermocouple readings have a time stamp and are saved to disk. Any assistance you could give me would be greatly appreciated.
Thanks,
Jordan
Attachments:
Forest_Fire_Thermocouple.vi ‏140 KB
435xlogger_triggering.vi ‏110 KB

Jordan,
You should be able to sample two different thermocouples in the example that ships with the 435x driver called "Getting Started with multiple tranducers Continous". Simply put each type of thermocouple in a different index . Each index of the Transducer Group Array can have a different type and specify the channels that correspond to that type.
One way that you can speed this VI up is to place a wait inside of the while loop. This will reduce the number of times the software polls the card if it has available data(increasing the overhead). I would suggest about 500 ms. The data that you receive will all have the same delta t because the sampling clock is hardware driven not software, so it does matter when the data is polled.
You will not be
able to get 60 samples per second when you are measuring multiple channels anyway. The sample rate for multiple channels is about 9/(# channels). This is explained in the 435x Users Manual.
I looked at your code and noticed that you tried to change some of the enumeration controls. Unfortunately you will not be able to change these because they are password protected on the low level subVIs, which is where they are defined.
The way you select if you want the notch filter is in the 435x Config you specify fast or slow. If it is slow then it will select 10Hz as the nitch filter. If you select fast the it will select either 50 or 60Hz You would then use the function "435x Set power line frequency"
Good luck,
Mike

On my home page my icon suddenly got large and I can see only one item at a time. How can I get the icon down to a normal small size?

On my home page under view my icons suddenly go large and one folder fills the page. How do I get it back to a normal size?

You are
Using a laptop and not a workstation
talking about a browser
Apple Safari
Safari
MacBook Pro

I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else. How can I get the app to function again?

I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else. How can I get the app to function again?
This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

This is a followup to my own posting above.
Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted. I deleted the app from iTunes. Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes. I said yes and then synched.
Readdledocs is now working again. It is no longer frozen. However, I have learned my lesson. I will download only pdf's from now on. I don't think it works so well with epub files. The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can I get the template( word rtf ) for PO – Printed Purchase Order ?

I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
The template code is POXPRPOL_XML.rtf
when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
Thank you,
Biju Varghese.

How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button

Connot get it to accept cookies; privacy settings are re-set each time after I change them. How can I get the privacy setting to stick and accept cookies?

I need to accept cookies to log into a technical site. I clear all cookies and the history and follow the instructions for setting privacy options to "Use custom settings for history" and to accept all cookies. When I go back to try logging into the site, it still tells me cookies aren't accepted. When I go back to Options-Privacy, the setting has been changed back to "Remember history" from "Use custom settings for history". I have done this about 5 times, trying various options, closing Firefox after making the change and starting it again - nothing works. How can I get the privacy settings to stay as I set them and accept cookies?

Blocking all cookies in Safari does not work. Deleted cookies will not stay deleted. There are numerous threads on this going back years, both in these forums and elsewhere. Many claim to have submitted the issue to Apple, but I have never seen anyone post a reply.
I have seen many suggested fixes that involve finding the cookies file, some including Terminal manipulations, and none seems to work universally. I can find noplace where Apple addresses this officially with an actual Apple-approved explanation or how-to.
Bottom line, your browser's security features should do what they claim: delete cookies. When they come back without ever even visiting another page, this is clearly not working in the way a reasonable user would expect.
Bottom line, Safari does not protect users' privacy in the way it pretends to and, after so many years of this issue, it appears that Apple wants it this way.
Having spent way too much time on this, I realize the choice is between Safari which is pretty well optimized; Firefox which is a lot pokier, at least for me; and Chrome, which I assume funnels personal information directly to Google.

Oj4632 I can't get the paper device out of my new printer? locked in somehow.

oj4632 I can't get the paper device out of my new printer? locked in somehow. very frustratied

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

I can't get my iMac to accept a CD/DVD disc. It acts like there's already one in there but there isn't. Tried the help menu but nothing worked.Suggestions?

I can't get my iMac to accept a CD/DVD disc. It acts like there's already one in there but there isn't. Tried the help menu but nothing worked.Suggestions?

Thank you, Allen. My iMac is a 2009. I can't shine a light into the disc drive slot as it has a built in whisker cover that prevents anything from getting in. It will accept a disc half way in before the disc reaches a springy obstruction.
About 3 weeks ago, the computer locked up so I inserted the OS disc and reinstalled it. In general, the computer works just like it used to but we've had a few quirks appear; for example, this is one of them. Also, we can't figure out how to keep from having to sign-in when we turn the computer on. Also, we can't access our one on-line account anymore. Very strange.
Dave
P.S.: Just realized I mis-spelled your name. Sorry Allan.
Message was edited by: DTabbert

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?

Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays

TS1702 it says that i have to pay again to download a game from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc. if you need.

it says that i have to pay again to download it from itunes.. how can i get the game in my itunes and phone? do I accept the charges and it will be re-embersed? what should I do? I have the order confirmation number etc.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I can't get the pop up preview to come up when printing shipping labels through paypal.

I can't get the pop up preview to come up when printing shipping labels through paypal. When I click the pay and print I get nothing but it does charge me. I can see it and print no problem through IE but not Firefox. I also can do a reprint of the label through my email confirmation. Paypal is listed under the exceptions in pop up blocker. I have tried re-installing Firefox and turning off pop up blocker but nothing seems to work. Thanks for any help or suggestions you may have.

Usually, you receive this notification if you enabled the option to back up via iCloud but you have not backed up for a while. If you want to back up your device via iTunes then you have to disable the option to back up to iCloud (Settings > iCloud > Storage & Backup > iCloud Backup off).

I can't get the printer to accept a different paper size. I'm trying to print on 6.5x10.

Similar Messages

Maybe you are looking for