I can't install any programs

i know the first thing that you guys will think is that i need to change my security preferences to where i can download programs from anywhere but thats not the case... when i go to try to install a new program i double click on the installer and i as soon as i do that the window for the installer comes up but with nothing in it and i have no clue whats wrong... please HELP

To post a screen shot here, click the little camera icon in the reply window toolbar.
That appears to be the Installer.
If it is happening with every installer file, please try it in Safe Mode as I suggested and report back.
It may be something related to the install of OS X. I'm not a huge fan of the whole USB installer thing as it seems to be flaky. Was that created from an installer downloaded for that Mac, or for a different one?
You may need to reinstall OS X from the Recovery HD: http://support.apple.com/kb/ht4718
I don't think this is related to Gatekeeper, but Gatekeeper can be temporarily bypassed by right-clicking on the installer file and choosing Open. If Gatekeeper is blocking it, it will present a small dialog asking if you are sure. You then click Open.

Similar Messages

  • Can not install any program

    I can't install any program in my mac OS X(10.6.3)
    I didn't install any harmful program before or change any things in system.
    I am new in mac and just use it for browsing internet.
    I can not copy any thing in Application folder.
    when I install program in installation step it's show me "The installation failed"
    and under this, for example for Virtual Box write: "The installer can't create the folder "/var/folder/1G/1GlwO6PrF+u3......""
    what can I do?

    this message is for all app that i try to install.
    What specific apps have you tried?
    can you tell me how can i repaired permissions by using Disk Utility?
    Open Disk Utility, select your hard drive in the list in Disk Utility's window, then click Repair Disk Permissions. And be aware that there are [permissions messages you can safely ignore|http://support.apple.com/kb/TS1448]. You also may want to [repair the hard drive with Disk Utility|http://support.apple.com/kb/TS1417] if you haven't done that recently. If it still doesn't work, try [starting up in Safe Mode|http://support.apple.com/kb/HT1455] and see if that makes any difference.
    If none of this helps, you may want to try a local Apple Store, if there are any in Malaysia. I think there's going to be a serious language barrier if the problem needs any complicated troubleshooting, and it's always helpful for the person helping to be able to see the machine in question.

  • I can't install any program with CC

    This all started with trying to install Lightroom 5.  I keep receiving the Error Listed below.  After read other forums I now have no Adobe CC programs installed and can't install any of them.  I really need help on this.
    I am running Windows 7 Pro 64bit.  Here is the error.
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: AdobeLightroom5CCMSetup-mul 5.0.0.0 {3f480018-d40f-429a-b939-d1a53276944f} -----------
    ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1157

    delfire32  we can download the adobe cleaner tool from the below link
    http://www.adobe.com/support/contact/cscleanertool.html
    1 : choose language as english
    2 : press "Y" when prompts .
    3 : choose option 3 and then option 1. We might also see adobe lightroom 5 in that list. Remove that as well.
    Post please rename "OOBE" folder to "OOBE.old" from the below location.
    C:\Program Files(x86)\Common Files\Adobe\OOBE .
    C:\Users\<user name>\AppData\Local\Adobe\OOBE .
    we can also try some of the troubleshooting steps mentioned in the documents. Though it is for previous e version products
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Hope that helps.

  • How can i install any program using java code

     
    Hi friends,
    i want to know how can i install any software using c# code.

    Hi,
    You may change your title, Since this is C# forum.
     >>i want to know how can i install any software
    usingc# code
    So what kind of your software?
    In C#,we can install and uninstall "*.msi" files (setup).
    The code to install software without user interface is:
    private void installSoftware()
    Process p = new Process();
    p.StartInfo.FileName = "msiexec.exe";
    p.StartInfo.Arguments = "/i \"C:\\Application.msi\"/qn";
    p.Start();
    For more detailed information, please refer to article
    C# - Installing and uninstalling software in codeproject.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I can't install any programs is their fix?

    Hi
    I would like to install a divx player however when I download it, it mounts just fin, however when I double click on the .mpkg it won't do anything. I know it has to be my computer because my friend has an iMac and can do it just fine. I don't know what I did to screw it up but I can't install anything on my computer and would like to be able to. Does anyone know how to fix this?
    Thanks
    The Net Duck

    To post a screen shot here, click the little camera icon in the reply window toolbar.
    That appears to be the Installer.
    If it is happening with every installer file, please try it in Safe Mode as I suggested and report back.
    It may be something related to the install of OS X. I'm not a huge fan of the whole USB installer thing as it seems to be flaky. Was that created from an installer downloaded for that Mac, or for a different one?
    You may need to reinstall OS X from the Recovery HD: http://support.apple.com/kb/ht4718
    I don't think this is related to Gatekeeper, but Gatekeeper can be temporarily bypassed by right-clicking on the installer file and choosing Open. If Gatekeeper is blocking it, it will present a small dialog asking if you are sure. You then click Open.

  • I can't install any adobe programs!!!

    Dear support!
    My problem is I can't install the Adobe programs from creative cloud.
    The story:
    When I try installing the premiere cs6 family the program dowloading, but not extract. Then I wrote a email the hungarian adobe distributor (designshop.hu), and kindly man wrote to me: Ok we know this problem, use this:http://www.adobe.com/support/contact/cscleanertool.html
    or write hte adobe support.
    I use the cleanertool. then I uninstalled all adobe programs. ANd then when i want install again ( for example PS) I get same problem like in premiere install.
    So NOW i can't install any adobe program.
    Please help me asap, becouse I can't do my job.
    Soory my english, and i hope yoe understand me.
    thanx

    Spokuc are you receiving any specific error messages during the installation process?  You can locate the error messages from your previous installation attempts within your installation log files.  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret your installation log files.

  • Can't install any OS on SSD - DV7-6030ew

    Hello,
    I have Kingston SSDNow V SNV125 64GB (~4 years old) which had been running fine in my PC BOX. I have recently bought new SSD and decided to put old SSD into my DV7-6030ew laptop. So I took out HDD from NB and replaced it with Kingston SSD.
    The problem is that I can't install any OS on this SSD. I tried:
    XP - after "Press  any key to boot from CD or DVD" I got setup screen and after few seconds I got BSOD. I tried three different XP versions - always the same BSOD.
    Win 7 - tried many times. System always installs successfully but then after random driver installation or Windows Update system doesn't boot. It freezes at windows splash screen or launches "System Recovery Options". I always install Intel Chipset driver and Intel MEI first. These two never killed the OS. OS gets killed later after GPU/Wi-Fi/Fingerprint/Other driver. Sometimes it happens that I setup all drivers but Windows Update kills OS. My last installation ended up with "IRQL_NOT_LESS_OR_EQUAL" during boot and now every restart it freezes at splash screen. I tried installing Intel Rapid Storage but it doesn't help.
    Win 8 with Update 1 - always installs successfully and almost always I'm able to setup all drivers (even through Windows Update). It always dies after Windows Update (random KBxxxxx).
    Ubuntu Linux - Installed successfully. Right after desktop showed up I restarted it (I didn't change anything) and I got "no such partition" error during boot.
    I have bought HP Sata cable replacement on EBay and put the old HDD into the second bay and connected it through this cable. So I have SSD in first bay connect with original HP cable and HDD in second bay connected with replacement cable. I have created two new 40GB partitions on HDD and setup two new Windows installation on this HDD. Both installed successfully. No problem with drivers, windows update etc. I tried copying one of these good installations from HDD partition to SSD using "Paragon migrate OS to SSD". It went well but during boot -> splash screen -> "System Recovery Options". I also tried to copy it through Paragon Partition Manager from Hiren's Boot CD but during boot I got this screen.
    Unfortunately the SSD is old and there is no firmware upgrade for it. NB has the newest F.1B bios installed.
    Why I can't install anything on this SSD? Please help.
    Regards
    Rychu

    Hey @RychuPL ,
    Welcome to the HP Forums!
    I understand you're unable to use your SSD in your DV7 notebook.
    Were both drives connected during the tests that you have run? If so please disconnect the secondary drive and test with only the SSD installed. It could be that the BIOS is picking up part of the Boot MGR from the original drive and attempting to boot from it in some way. Only thing that really makes sense to me at the moment.
    Another "solution" (and I use the term very loosely in this case) is to install Windows 7 or 8 while offline and turn off the Windows updates to prevent the crash, or if it crashes after a specific update, to uninstall and block that specific update:
    To do this follow these steps: (Windows 8)
    1. Boot into safe mode: Windows Startup Settings (including safe mode)
    2. Press Windows Key + X.
    3. Click Programs and Features.
    4. Click View Installed Updates on the left hand side.
    5. Click on the Installed On heading to sort by date installed.
    6. Click on the update that was recently installed.
    7. Click Uninstall at the top.
    8. After you've uninstalled the updates test the startup.
    If it works, block the Windows updates that caused the issue: (Windows 8)
    1. Press Windows Key + X.
    2. Click Control Panel
    3. Click System and Security.
    4. Click Windows Update.
    5. Click Check for updates to rescan for available updates.
    6. Click on # important updates are available. Where # is the number of available updates.
    7. Right click on the update and choose Hide update. If the update is not shown, click the Optional tab on the left.
    If you use Windows 7 follow these steps to get into the update list:
    1. Boot into safe mode: Start your computer in safe mode
    2. Click Start.
    3. Type Update in the search.
    4. Click View installed updates.
    5. Click on the Installed On heading to sort by date installed.
    6. Click on the update that was recently installed. 
    7. Click Uninstall at the top.
    8. After you've uninstalled the updates test the startup.
    To block the updates in Windows 7:
    1. Click Start.
    2. Type Update in the search.
    3. Click Windows Update.
    4. Click Check for updates.
    5. Click on # important updates are available. Where # is the number of available updates.
    6. Right click on the update and choose Hide update. If the update is not shown, click the Optional tab on the left.
    To be frank I really don't have any suggestions other than that considering you've tried multiple operating systems with identical results. 
    Hopefully removing the HDD allows the SSD to work. In which case formatting the drive or running KillDisk would be the best option.
    Hopefully that helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Can you install a program...

    Can you install a program, like the sims 2, to an external hard drive?
    Sorry is this has been asked a million times
    iMac G5 (without iSight)   Mac OS X (10.3.9)   Goldfrapp Fan

    Hello,
    Yes, if your internal hard drive's space is limited / low, then installing on an external hard drive is a perfectly fine option.
    Keep AxL's comments in mind.
    And, also consider that it will probably run a little slower from the external drive. To keep performance up, you should at least use a FireWire 400 drive and get one that spins at 7200 R.P.M.
    If you use a USB 2.0 drive, you will definitely be complaining about performance while using the program.
    And, most updaters are available for download, and usually ask you which drive / program location to install them to. So, that probably won't be a problem. It's a consideration. But, probably not a huge issue.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • I just upgraded to 10.7.3 and now I can't install any applications.

    I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
    After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
    Any hints?

    I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
    A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
    Step 1 results
    com.symantec.kext.internetSecurity (1.3.2f5)
    com.symantec.kext.ips (3.2f8)
    com.cisco.nke.ipsec (2.0.1)
    com.symantec.kext.SymAPComm (11.1.2f17)
    Step 2 results
    org.macosforge.xquartz.privileged_startx
    com.symantec.symSchedDaemon.plist
    com.symantec.symdaemon
    com.symantec.sharedsettings
    com.symantec.Sched501-2.plist
    com.symantec.Sched501-1.plist
    com.symantec.navapdaemonsl
    com.symantec.navapd
    com.symantec.MissedTasks.plist
    com.symantec.diskMountNotify.plist
    com.symantec.avscandaemon
    com.micromat.TechToolProDaemon
    com.google.keystone.daemon
    com.bombich.ccc
    Step 3 result
    org.macosforge.xquartz.startx
    com.symantec.uiagent.application
    com.prosofteng.DGMonitor
    com.micromat.TechToolProAgent
    com.google.keystone.root.agent
    com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
    com.ecamm.printopia
    com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
    Step 4 result
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AEProfiling.framework
    AERegistration.framework
    Adobe AIR.framework
    AudioMixEngine.framework
    Frameworks
    NyxAudioAnalysis.framework
    PluginManager.framework
    R.framework
    TSLicense.framework
    cisco-vpnclient.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    .DS_Store
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    Google Earth Web Plug-in.plugin
    JavaAppletPlugin.plugin
    OfficeLiveBrowserPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
    Unity Web Player.plugin
    Unused
    flashplayer.xpt
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    npgtpo3dautoplugin.plugin
    nsIQTScriptablePlugin.xpt
    /Library/Keyboard Layouts:
    /Library/LaunchAgents:
    com.google.keystone.agent.plist
    com.micromat.TechToolProAgent.plist
    com.prosofteng.DGMonitor.plist
    com.symantec.uiagent.application.plist
    org.macosforge.xquartz.startx.plist
    /Library/LaunchDaemons:
    com.apple.remotepairtool.plist
    com.bombich.ccc.plist
    com.google.keystone.daemon.plist
    com.micromat.TechToolProDaemon.plist
    com.symantec.MissedTasks.plist
    com.symantec.Sched501-1.plist
    com.symantec.Sched501-2.plist
    com.symantec.avscandaemon.plist
    com.symantec.diskMountNotify.plist
    com.symantec.navapd.plist
    com.symantec.navapdaemonsl.plist
    com.symantec.sharedsettings.plist
    com.symantec.symSchedDaemon.plist
    com.symantec.symdaemon.plist
    org.macosforge.xquartz.privileged_startx.plist
    /Library/PreferencePanes:
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    SymantecQuickMenu.prefPane
    TechTool Protection.prefPane
    /Library/PrivateFrameworks:
    SymAVScan.framework
    SymAppKitAdditions.framework
    SymBase.framework
    SymDaemon.framework
    SymIPS.framework
    SymIR.framework
    SymInternetSecurity.framework
    SymScheduler.framework
    SymSharedSettings.framework
    SymSubmission.framework
    SymUIAgent.framework
    SymUIAgentUI.framework
    /Library/PrivilegedHelperTools:
    com.bombich.ccc
    /Library/QuickLook:
    GBQLGenerator.qlgenerator
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    Flip4Mac WMV Advanced.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    Google Camera Adapter 0.component
    Google Camera Adapter 1.component
    /Library/ScriptingAdditions:
    /Library/Spotlight:
    GBSpotlightImporter.mdimporter
    LogicPro.mdimporter
    Microsoft Office.mdimporter
    iWork.mdimporter
    /Library/StartupItems:
    /etc/mach_init.d:
    /etc/mach_init_per_login_session.d:
    /etc/mach_init_per_user.d:
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Fonts:
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Google Earth Web Plug-in.plugin
    WebEx.plugin
    fbplugin_1_0_3.plugin
    Library/Keyboard Layouts:
    Library/LaunchAgents:
    com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
    com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
    com.ecamm.printopia.plist
    com.google.Chrome.framework.plist
    Library/PreferencePanes:
    Printopia.prefPane
    Step 5 result
    AdobeResourceSynchronizer, iTunesHelper, Air Video Server

  • I can't install any dmg files

    I can't install any dmg files and I can't find CoreService nor DiskImageMounter under Library order neither. I think they're missing.
    Please Help.

    They should come up when you double click on the DMG file.
    If you are getting a terminal windows when you double click on a DMG file then something has switched the Default program from Installer.app and or DiskImageMounter.app to terminal.
    Right click on the DMG and select Get Info. In the windows that comes up find the Open with section then select DiskImageMounter.app and click Change All.
    Both DiskImageMounter.app and Installer.app are in /System/Library/CoreServices. But that folder may be hidden. So you will need to use the Go Menu item "Go to Folder" and type in what I posted above to find it.

  • I can't install the program I just purchased: Acrobat XI Standard

    I can't install the program I just purchased: Acrobat XI Standard. When I bring up the installer, it does nothing.

    Hi Mountain Matt,
    Please make sure that you're logged in as an administrator, and that any antivirus software on your system is disabled. Then, trying downloading Acrobat from Download Acrobat products | Standard, Pro | XI, X, and run the installer.
    Please let us know how it goes. If you're still having trouble and need additional help, it will be very helpful to know what version of Windows you're using.
    Best,
    Sara

  • Can't Open Any Programs

    I had been on Safari for awhile and had to leave the computer for about 10 minutes. When I came back the mouse is responsive, but nothing else is. I can't shut down any program or the computer. I did a forced shut down, and it starts back up just fine but now I can't open any program. The mouse moves around the screen but nothing else seems responsive. After 5 minutes, my screen saver comes on like normal.

    Hi
    what OS are you on - Leopard, Snow Leopard ?
    I suggest booting from the install dvd, repairing permissions (just in case) using Disk Utility from the dvd and using the 'repair disk' function too.
    You might also see what starting in Safe mode does for you - hold the Shift key on startup

  • Can't open any programs after start up

    after logging in i can't open any programs, when i click on somthing it acts like its going to load but never does, a couple of times it ask me to power off and then turn it back on with the same results. Please HELP!!!

    You haven't provided us any usefuly information such as what machine you have or the verison of OS X it has installed. PLEASE complete your profile! It's simple to do, click Your Stuff in the upper right of this page then click Profile and complete as needed.

  • After installed Leopard, can't install any other software....help

    I just installed Leopard 10.5 into my Powerbook G4 17" 1.5Gz, but after that I can't install any other software, I try CS3 upgrade, new Poser7 and apple 10.5.1 upgrade, after I click install....nothing happen..... just the spining color wheel, try few time and wait for an hour... still the same, need help!

    In your utilities folder, in applications there's a program called disk utilities app. Go in there and click on your hard drive and click on disk permissions, first aid should also be highlighted. Post back if you require additional information. Good luck, and don't worry this is fixable.
    Ray

  • Can we install any softwares in i pad like auto cadd, catia

         can we install any softwares in i pad like auto cadd, catia

    You can only install apps/programs that are available in the iTunes App Store on your computer, or the App Store app on the iPad. 'Normal' PC or Mac (OS X) software cannot be installed on the iPad (iOS) as they are not compatible. So if they have app versions in the store you can install them (but the iPad is probably not powerful enough for sophisticated CAD), otherwise there are some apps that allow you to remotely connect to a PC or Mac

Maybe you are looking for

  • Report for Dunning

    Hi Experts, Any one has written report for Dunning.(F150) Scenario: transcation code F150 can't be schedule; it's runs manually by users. we  need a report  same as what F150 is doing so that we can schedule in job. if any one knows  report for dunni

  • Relation between fi - isu

    Hello, i have to do a report which extract information like the transaction fbl3n but i have to add others informations which were in isu, like the partner, the anlage... what can i do to make link between bseg and isu tables? Now i select all inform

  • QoS best practise in MPLS

    Hi, I'm having a scenarios for applying QoS on the entire customer network. Its something like this: i. Equipment -> Layer2 SW -> PE VRF -> P The equipment's traffics are not marked with anything at least, the equipment gateway would be the PE VRF. I

  • OZF Claim Settlement Method RMA in entered status

    On selecting RMA as a settlement method for a claim, found the following issues (R12.1.3) 1. After referencing the original sales order and line, if we enter a partial quantity of the original line and the claim amount, when this gets converted into

  • 10.4.9 Problems

    Hi, I asked this question a while back but never got any definite feedback. (However I was told to always do OS updates by downloading from the Apple site rather than using Software Update - thanks for that noeqplease). I am still running 10.4.8 as w