I can't move or drag any folders/files/documents/emails anymore. I have to copy and paste them which is frustrating. How do i fix this?
I can't move or drag any folders/files/documents/emails anymore. I have to copy and paste them which is frustrating. How do i fix this?
I'm on the lastest software, and my computer is less then a year old.
Please help me!
If third-party software called "Air Display" or "AirParrot" is installed, remove it according to the developer's instructions, then restart the computer. Back up all data before making any changes.
Similar Messages
-
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
iTunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?
Not if you sync your contact to itunes using the program provide i.e outlook..etc
-
I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...
Hi kmkrodel,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud on your Mac or iPad after a change in your Apple ID password, you may find the following article helpful:
iCloud: Account troubleshooting
On the other hand, if you are talking about sharing files from your Mac to specific apps on your iPad via iTunes, then this article may be of more use (Note: When using this function, you will only see apps that support file sharing, not all apps on the device):
iOS: About File Sharing
Regards,
- Brenden -
I am trying to copy many titles of music from my pc to the latest I Tunes. I can no longer copy and paste them like I used to be able to do. I need serious help here. Any thoughts or resolutions? Frustrated
See also Repair iTunes Security Permissions and apply the suggested steps to the iTunes folder and the source media folder.
I may be reading too much into things, but is your media stored in a bunch of folders where each folder represents a playlist? If so my script ImportFolderStructure might be useful to you...
tt2 -
Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original? The cut and paste function is not available and there's no "move to" function. Am I missing something? It was so easy with Windows.
Drag the files, or press Option when pasting them; this accesses the Move To function.
(124070) -
In iPHOTO I can highlight a photo to include in an email, but after I select the a photo, the "choose" box will not darken to let me choose that photo or any of my original photos to put them in an email or even to copy and paste them else where.
The only changes I have done is the original photos were taken with a different digital camera from the one I use currently. The newer digital cameras photos can be selected and emailed just fine. What is not being recognized by the iPHOTO programing as to not let me select (choose) to older photos taken by the older original digital camera?Thanks for the response to my query on emailing photos from iPHOTO. To answer your questions:
1. When I first connected my new digital camera to my iMAC and installed it's program from it disk, all went well and that program with Icons are currently on my desk top. When I down loaded pictures from this new camera into iPHOTO, I was asked if all pictures from this camera were to be down loaded into iPHOTO only, I answered yes.
2. I did nothing to the photos in iPHOTO, they are my original pictures setup in various groups and are not thumbnail copies of the originals.
3. And yes, I have tried to attach photos from iPHOTO directly into an email message in both Apple's MAIL program and even through my AOL service provider account to no avail. I get the same issues of not being able to choose older pictures for insertion in an email message, only newer pictures taken with the new camera.
4. I have even gone back into my external back files and restored older versions of iPHOTO and the same thing happens.
5. I have even thought of uninstalling the unused new camera's desk top files, but since there is nothing in these files and both my new and older cameras are Canon models, I can see no issues for removing the new camera files?
I hope this extra detail is lear to you and again tell for your assistants.
clarence -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.
Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software. -
I just upgraded to Firefox 3.6.13 this morning and now, when I click on a link in an email or webpage, it won't open Firefox. How can I get this option restored in Firefox so I don't have to copy and paste the link?
See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html -
Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this
Quit the app and restart the iPad.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try the videos app again. -
Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?
Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy -
Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste
I looked at Bento and at first glance I think it would do everything I want it to do, then I saw a review or something from a customer that indicated the information in Bento could not be exported (say to send out a mailing). I may want a program that can do that as well, is there one out there? If not it does look like Bento will work. When you save a picture to a customer in Bento can you open it up full size?
-
I entered birthdays into address contacts and then into ical calender. Now I can not get it to send a email alert as ical says it is a readable calender only. How do I correct this?
What is your operating system? Reader version? Is this a local or online PDF? If online, in what browser?
-
I can't type in firefox. At all. I've reinstalled, tried starting in safe mode, tried resetting. Nothing is working. How do I fix this?
Some have reported that pressing F9 and the Windows key simultaneously one or more times has worked to fix issues with the keyboard not working.
Maybe you are looking for
-
Near new mac pro retina, updated OS last night, re-started, finished my work & put it into sleep mode. On power, & hooked up to Thunderbolt screen. Got up this morning and it won't boot up. Is there anything I can do myself, or is this a shop problem
-
Please help. I have the Sony RCD-W500C Cd Recorder.
Hi I have the Sony RCD-W500C Cd Recorder. Under the "specifications tab" located here: http://store.sony.com/p/RCD-W500C/en/p/RCDW500C#specifications I would like to know if the "Hybrid Pulse D/A converter" that is in this CD Recorder also converts t
-
can any one tell how to make use of Safty stock for delivery creation for customer. as some times we don't have the req. quty open for delivery/ stock tranfer. thanks in advance
-
HOW CAN I GET MY SERIAL NUMBERS TO WORK?
I DOWNLOADED THE CREATIVE CLOUD AND THEN DOWNLOADED THE PHOTOSHOP ELEMENTS AND PREMIER. IT STARTED A TRIAL, ONCE THE TRIAL PERIOD WAS OVER IT WILL NOT LET ME PUT MY SERIAL NUMBERS
-
How set as Read only file.
How can I set my spreadsheet I just made into a "read only" Format?