I can't open AA 3 ! Anybody help me !

Hi everybody !
Now I’m using an "Old" Toshiba Laptop Satellite ! It includes :
- Adobe Audition 3.0
- Soundcard Realtex onboard
- Window Vista Home Basic, Dual Core, 1 GB Ram, 80 GB HDD
AA is already installed but… when I open Audition. A message box appears and says :
"Adobe Audition could not find a supported audio device…. Please check your device settings."
I’ve opened Control Panel and checked the default Sound playback & recording device, and they are tottaly fine, not thing’s wrong…Other program such as WMP, Winamp run normally, just only AA.
I’ve tried to install the ASIO4ALL Ver. 2.9. When I opened it, a message appears and says :
“A version of this file is not compatible with the version of Windows you’re you are running”. It advises that I should use another Window Vista Version such as Vista 32bit, 64bit,…
I have a small Home Studio, recording drums kit, guitar,...I and my brothers wanna make some videos (post onto youtube) to teach everybody who wants to learn how to play drum, guitar, play games... but this is a big trouble, I can't solve this hard solution !
I don’t know what to do ! I need some help !
I really thanks who have helped me.

Again have you tried the Audition 3.0.1 patch?
Maybe try disabling sound in Vista under the control panel. Then try ASIO4ALL again and make sure that your audio card is selected...
If you can get sound in other applications then you should be able to get sound in Audition. You may need to close other applications (like iTunes etc.) before Audition can use the card, but that would no doubt be a bug if Audition was being blocked from seeing the card completely. If ASIO4ALL can see the card and the card is enabled (green lights) for at least output then ASIO4ALL should always work with Audition.
There have been cases on one brand of computer I've used where the onboard audio would somehow become disabled in the BIOS when there were no speakers connected to the output and the computer was then turned on. The onboard audio would then remain disabled even after restart or cold boot and so you would have to go into the BIOS setup screen to enable the on-board audio. But if you do get sound from other applications then this wouldn't be your problem.
As for remoting into the computer...

Similar Messages

Pages created a random password for my document on my iPad. I have no idea what it is and I can't open my document. HELP!!!

Pages created a random password for my document on my iPad. I have no idea what it is and I can't open my document. HELP!!!

How old is your son?
Under the Spanner in Pages there is Set Password where you create a password with hint. You really have to deliberately dig this out to do it.
Do you get a hint when you are asked for the password?
The Password is very secure, if you can't remember what it is, you will have to recreate the document.
Peter

I am trying to scan document that I will then attach in an email. When I attach it it shows up as a picture within the email instead of an attachment an people can't open it. Any help here?

I am trying to scan document that I will then attach in an email. When I attach it it shows up as a picture within the email instead of an attachment an people can't open it. Any help here?

What kind of Mac are you using, and what version of the operating system?
You should be able to select the document that you want to attach and then use the contextual menu (right click in some worlds) to compress the document, producing a .zip file. You can then attach that to the email and it won't appear as a picture within the email.
If I recall this correctly, the "compress" part in the contextual menu may have a different terminology.

HT201401 my iphone accidentally reset,i can't open it now.please help me to do so

i accidentally reset my iphone,now i can't open it. i need help pls.

Hi stlavoie,
You may want to read over this article for enabling your Wi-Fi router and iPhone to be able to work together -
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
For assistance with getting your iPhone activated, I suggest using the steps provided in this article -
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
If you still can not complete activation, note the last step -
If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

I have an iphone and after upgrading it`s system i can not open videos now.Please help me

I have an iphone and after upgrading it`s system i can not open videos now.Please help me

Trash the prefs in the preferences folder.
Important Directories
Mylenium

Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

After installing icloud, I can't open Photoshop CS, please help. I am an artist and need photoshop to work.

After installing icloud, I can't open Photoshop CS, please help. I am an artist and need photoshop to work.

Did you upgrade to Lion just before setting up iCloud? that's more likely to be the issue. PhotoShop CS2 is a PPC program and won't run on Lion - on Snow Leopard it requires Rosetta to emulate PPC, and this is not included in Lion. CS3 and lateer apparently work though with issues.
Click on the program's icon in the Finder and hit command-i. Near the top of the pane it will say 'Kind': if it says 'PowerPC' then this is the problem. It will not run on Lion and there is no workaround. You will need to revert to Snow Leopard (you could install this on an external disk and start up from that).

I just down loaded a few books last night and since down loading the ios8.0 I can't open any of them, help please

I just down loaded a few books last night and since down loading the ios8.0 I can't open any of them, help please
<Subject Edited by Host>

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

My itunes crashes and I can't open it all. HELP

My itunes crashes and I can't open it all. Just installed the latest version 10.5.1. I can't even get it to open to try and figure out what is wrong. Can I uninstall it and reinstall the less recent version which was working? Help!!
I am not a computer guru, the reason that I love my MacBook Pro is that I don't have to worry about it, now I am worrying, because I can't get into my itunes at all. I would trash the new version of itunes and find an older version (I did try reinstalling 10.5.1) as long as I was reassured that I wouldn't lose all my music.
Thanks all.

Sorry to hear.
Wow, first iPad crisis with vs 5 & 501, now this?
I see the update waiting right now for my MBP, and is why I'm here to see what's up.
On the software update panel, it's all about cloud service.
Looks like 10.5 is the end of the road for me.
I can see having gaming on cloud, but with the work I put into my tunes, no way.
We'll see how people react as time goes, and the next crisis.

Firefox won't open, error msg = can't find profile; deleted all app.data to rid new Win 7 Total Security virus - tried both v 4.0 & v 3.6 (now no error msg either). Can't open profile manager, can't open safe mode. pls help

My mother's computer was infected with the new "Win 7 Total Security" virus (apparently a fake antivirus program) - corrupted real av. To remove, we followed online advice to delete everything in AppData, for all programs, plus some other stuff. We moved it all to a flashdrive for safety, but after successfully removing virus, likewise cleaned & reformatted flashdrive. This apparently deleted Firefox profile(s), and after uninstalling & reinstalling, Firefox still won't open - I can't create a new profile. With v 4.0, I get an error message about not being able to find the profile. Found advice on how to open profile manager, but it won't open. Found reference to version 4 dispensing with profile manager, so tried installing version 3.6 again; still won't open, still can't open profile manager, but now no error message at all.

THANX for the reply cor-el. I've never had a problem using just "firefox -p", but i did use the full path like you advised after i read the profile manager article here before i posted my question. Unfortunately it didn't work. I've backed up all 3 profiles from the "%appdata% profile" file, and also from my remaining main profile that i'm on right now. I decided i'm going to uninstall ff3.6.28 & upgrade to "firefox 11" this weekend and hopefully create the other 2 profiles along with my main one. I do like in the newer versions of FF the tabs on top like googles chrome because it gives you more room on the page. I also like some other features too, but the main reason i kept my old version both times is because the newer versions didn't seem to load pages any faster than version 3.6.28. I'm not going to worry about some themes/personas not being compatible with ff11. I'll find some new ones. I think when i tried "ff9" awhile back along with my current version, i just deleted the shortcut that the article said to create on the desktop and still had all 3 profiles & no problems like i have now. In case your curious, the article on how to create more than one version of firefox at the same time was on the site "Dottech.org>[How To] Tip: Install multiple versions of Firefox to test before upgrading to latest release". It works but i obviously did something different this time that caused this problem. THANX again for your time/help, i do appreciate it.

I keep getting the following message: Runtime Error...Microsoft Visual C + Runtime Library Program C:\Program Files\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now. Help!!

I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Error message "Can't open the illustration." - HELP

I work for a small company in the product development area and we use AI every day, all day. We work on PCs (windows 7) in AI CS6 design standard.
About a week and a half ago, I got the error message "Can't open the illustration." I then proceeded to recreate my file that was lost, once saved and closed, the same error message popped up after trying to reopen. The file was recreated by another person, and the same error message occurred. This has now happened to 5 of my files and a handful of files created by coworkers.
The error seems to be completely random, as we have been able to create other files without a glitch. The other odd thing, is that the one person who uses a mac in our creative department was able to open our 'lost' files as single pages on her AI CS4.
Please help!
Thank you.

We have tried both saving the files on our company server and on our individual desktops - neither of which will open the files.
Fonts are ok - they are all created and saved in CS6.
Printers, I believe are all correctly set up.
We tried a complete reinstall on one PC - still running into the same random files ending up 'lost' with the same error message.
Originally, the cs6 design standards (6 licenses total) were loaded to the server/shared drive and then downloaded onto each PC from there - we believe this may have something to do with the corruption, but this problem has just begun within the last month and the programs were all downloaded over 6 months ago.

I can't open PRE 9! HELP PLEASE!!!!

Hello there,
I don't know what to do anymore, my PRE 9 won't open any project files, any new files. And now and then it pops up a message saying it can¨t open the file so now it has to force close.
I've tried to system restore to a day where it worked, uninstalled it 6 times now and updated it to 9.01 but non of these has worked so I don't know what to do now.

•What operating system?
Windows Vista Home Premium
•Have you installed any recent program or OS updates?
Not sure probably not
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
I take videos from a Canon 600d with the file format at 18M 5184*3456
•If you are getting error message(s), what is the full text of the error message(s)?
I get non and the program just forcecloses
•What were you doing when the problem occurred?
I tried to reopen the file and then start a brand new one. When those didn’t work i uninstalled it and reinstalled it, but that did work for like a day and then it stopped working.
•What other software are you running?
Spotify, Google Chrome, TeamViewer
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
4.00 GB RAM
124 GB free space
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
It worked to uninstall the program and reinstall it for sometime but now it won’t work. I’ve tried the BadDriver solution but it didn’t work
•What are you editing, and does your video have a red line over it BEFORE you do any work?
I was editing a short movie. And no there’s no red line over it.
•Have you viewed the tutorial links athttp://forums.adobe.com/thread/1275830 page?
Yes but they were to no help
•Which version of Quicktime do you have installed?
Quicktime 7
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
ATI Radeon HD 3800 Series
What is your exact graphics adapter driver version?
I think it is
Aticfx32.dll.aticfx32.dll,atiumdag.dll,
Have you gone to the vendor web site to check for a newer driver?
Yes, but I can’t install it for some reason

Hi! I have downloaded a ready-made website and I can't seem to open it. The "theme" install instructions are talking about a "zip" file which I cannot see. Would anyone know why I can't open it? PLEASE HELP!! Thanks!

Hi Everybody
I have downloaded three "ready-made" websites for me and it is supposed to have Wordpress in as well. I can see the folders in my downloads but I can't open them. It refers to a "zip" file which I don't see nor a "dmg", only a blue folder. Can anyone help me to figure out how to get this open and set up on my computer? I guess you can tell I'm new and very frustrated. Thank you!

It's not clear what you mean by 'see the folders in my downloads but I can't open them', although it seems possible that a zip file opened/unzipped to create them.
Perhaps if you include a screenshot, and/or a link to the site where you got these, and describe exactly what happens when you try to open a folder that won't open.

I downloaded the camera raw 8.7 update, but can't open app. Please help!

I've tried this on two different Mac computers. I recently bought the Nikon d750, and am unable to open any raw files with Lightroom 4 or Photoshop CS6. The 8.7 DNG converter available to download through abode is not working. I am going through all of the steps to install, but then nothing. Can't open or find it anywhere. Can someone please help. I am on a deadline!

As mentioned it was not in the applications folder. HOWEVER, I did a broach search on "dng" and found the "Adobe DNG Converter.app"!!! I don't know where it was hiding but moved it my desktop. I was able to convert a folder full of NEFs and import to lightroom. Now everrything is looking pretty good for me hopefully my last couple of posts will help lolapea1:
Recap 1) be sure to load the DNG converter in addition to the camera raw converter
2) Search all folders for Adobe DNG Converter.app and move to where you can find (ie. desktop)

I can't open AA 3 ! Anybody help me !

Similar Messages

Maybe you are looking for