I can't open the creative cloud app installer, i'm getting an error message that says safari cannot open the specified address
i had previously installed it so i could use the 30 day trials, but i deleted i from my machine. now it won't open even though i purchased the creative cloud.
Mebridge please begin the installation process in a different web browser. You can also download the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
Similar Messages
-
When I restarted my computer I suddenly cannot open Firefox
Firefox versions after 3.6 no longer run on the PPC processor. You can only update to the latest 3.6 release (3.6.23 at the moment)
-
when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?
Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number. Now I get an error msg that says "Licencing has stopped working". What do I need to do?
Hello Carole,
Please try the steps mentioned in the link below:
Error "Licensing has stopped working" | Windows
Thanks
Alisha -
I am trying to do a simple copy and paste function while editing my website and I am getting an error message that says that my browser will not allow this function.. how can I override this?
thanks
Doug SnyderYou need to set Copy'n'Paste security policies for that domain in Firefox.
AllowClipboard Helper will help you do that. <br />
https://addons.mozilla.org/en-US/firefox/addon/allowclipboard-helper/ -
I would appreciate if you can help me resolve this issue. Thank you.
Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!
-
I keep getting a message saying that the itunes library cannot open because it was
created by an earlier version of itunes. I recently upgraded to the newest version of itunes.Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
HI,
I have combed previous discussions and tried the suggestions. I am running OS X 10.9.2. My Epson software is current( I just re downloaded all the drivers etc.) I uninstalled and reinstalled my printer. I opened sharing and there is a name there. My hardware has this message if this helps:
rastertoescpII:
Path: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/ MacOS/rastertoescpII. I have turned off, unplugged, waited... nothing. I am able to do a test print and all is fine. Epson only assists via email and I have to wait 24hrs. I'm reaching out here; been banging my head against the wall since 7am today. I really need to get back to work, sigh. Any assistance is greatly appreciated.
KristinI was contacted by Epson support, all resolved. There were so many steps we did to resolve this; I'm unable to remember them all to share here.
-
After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
coming all the time.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I keep getting an error message that says "iPod cannot be synced. The iPod is not connected."
I've restored it multiple times and I've had no luck! What do I do?
Can you access the images on the phone with Image Capture (in the Applications Folder) ?
-
when i try to download most of the creative cloud apps, it comes up with an error -2147024546. What does this mean?
Nfunchio13 that is fairly unique error. Unexpected errors like this are typically the result of the firewall settings or security software interfering with the Adobe Creative applications from being downloaded.
Nfunchio13 what type of networking environment is your computer utilizing? You can find guidance on how to resolve download errors at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. -
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme. -
I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT -
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT
Maybe you are looking for
-
One Accesspoint and two server...what would you suggest?
Hello! I'm developing an application which handles two wireless barcodereaders. There are two computers, and one of them is connected with the accesspoint. The communication to and from the accesspoint is managed with an COM Component, which is used
-
I uploaded 7 podcasts using Podomatic. iTunes is using the titles of one of the podcasts as the title for the page. I need to change the page title and also remove my name (not sure why my name was posted instead of the name of the podcast speaker).
-
I've been using elements 9 for a few months now, and haven't had any problems until recently. When I try to open from a desktop shortcut, the welcom screen doesn't appear. A process is created, but nothing else happens. I can launch the organiser fro
-
ACD 23" - No Image Until Vista Login Screen
System: Windows Vista 32-bit Business Edition Processor: 3.06 Ghz P4 Video Card: Raedon 9800 XT Hopefully someone can give me some clarification on this. But when I boot up my PC none of my boot up screens are visable on my 23" ACD. I cannot view the
-
ME22N Hide/Disable - Service : Attachment List - New - Create Attachment
Hi, My requirement is to hide/disable the CREATE ATTACHMENT in ME22N. Users were able to see Create attachment button through Service : Attachment List - > New -> Create Attachment, i need to hide/ disable this , so that they will not upload any att