I can't retrieve usm and vacm tables from router cisco 2800. Help please!!
Hi, I'm doing some tests in a router cisco 2800 using snmp in versions 2c and 3. I configured views and communities for version 2c and user, groups and views for version3; I suppose that the vacm and usm parameters involved in the groups, views are stored internally in usm, vacm tables. I wanted to check if the parameters I configured were inside the tables, but when I tried to retrieve all those values through get table or get next commands, I obtained the answer "end of mib view" in the application I'm using (SNMP J MANAGER) and also in wireshark where the requests are sent but the responses contain the OIDs belonging to the tables but with the value end of mib view.
I know for experience doing the tests, that "end of mib view" is obtained in a response when you try to request a OID that is outside of the view being used by a community. But the last thing I did was create a community related to a view with access to internet included. Later, I used that community (comlectura) in version 2c to retrieve those values of usmtable (1.3.6.1.6.3.15.1.2.2 ) and vacmtable (inside of 1.3.6.1.6.3.16.1) and nothing.
These are some commands I configured in the router:
snmp-server group readonly v3 auth read readview
snmp-server group writeonly v3 auth write writeview
snmp-server view readview internet included
snmp-server view writeview internet included
snmp-server view viewcomlectura mib-2 included
snmp-server view viewcomlectura2 system included
snmp-server community comlectura view readview RO
snmp-server community comlectura2 view viewcomlectura2 RO
snmp-server trap-source FastEthernet0/1
I think the cause of this error perhaps is because these tables don't exist in the CISCO MIB, but I don't thinks cisco devices ONLY have cisco mibs (
1.3.6.1.4.1.9) inside of them, because I can make request with OIDs of mib-2 branches. Anyway, please someone that can guide me in this problem. Thanks in advance.
You cannot use Mavericks. Ask a friend who still runs windows or any Mac OS except Mavericks to bring their laptop and help you out.
Or plug in a USB drive for instance and create a bootable version of any previous version of OSX since 10.5.x -10.8 all of which will work fine.
Or dual boot to windows where the latest airport utility is still 5.6
Similar Messages
-
My iPhone 5S drowned in a rainstorm. How can I retrieve contacts and text messages from iCloud backup onto my iPad mini? There are some contacts on the iPad already but nowhere near all of them. I need to re-enter the contacts manually into an iPhone 4 as it does not support iOS 8.
Let me get this straight.....You lost your phone. You never backed it up, either to your computer or to a cloud service.
How in the world would you expect to get data back? -
How can we retrieve list and library data from rest services
Hi Everybody,
How can we get the list or library data from sharepoint 2010 rest services.
Here is the URL I am trying: https://siteurl/_vti_bin/listdata.svc
Can anybody please provide sample c# code to pull the info.
Thanks in advance,
Krishna
KrishnasandeepHere is reference material:
http://msdn.microsoft.com/en-us/library/ff798339.aspx
And an example:
http://www.c-sharpcorner.com/uploadfile/anavijai/rest-api-in-sharepoint-2010-for-listdata-svc-part-2/
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to insert data into database table from a servlet? Help please.
From a servlet I want to insert a message with some servlet parameters into an oracle database table by writing 'insert into tablename'. How shall I write the sql statement?
simple suppose u wanned to insert user name and password into table user_info then this is a simple example .....
Best Regds
bondzoro
[email protected]
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class tester extends HttpServlet {
Connection con = null;
public void init(ServletConfig sc){
super.int(sc);
Class.forName("oracle.jdbc.driver.OracleDriver");
public void service(HttpServletRequest req,HttpServletResponse res) throws ServletException,IOE
try {
con=DriverManager.getConnection("jdbc:oracle:thin:@database_URL:1521:ORA8","username","pa
String user = req.getParameter("username");
String pass = req.getParameter("pass");
PreparedStatement pst = con.prepareStatement("insert into user_info values(?,?)");
pst.setString(1,user);
pst.setString(2,pass);
pst.executeQuery();
pst.close();
con.close();
}catch(Exception _e){
_e.printStackTrace(System.err);
~ -
Lightroom not merging and sorting images from two different cameras - help please !!
Hi guys,
I need some help here. I've just imported a few thousands of images form two different cameras, however Lightroom simply sorts them by camera only. (i.e.. images from the first camera, all sorted by capture time, then come images form the second camera.)
The cameras are the same brand and model, times are synchronised, but the images refuse to merge and sort. I've tried putting them in the same folder and importing, but that doesn't do it either. I've been doing this for years and it all worked fine, till today. Does anyone know whats causing this, and how I can fix it?
Thanks in anticipation.
LatchHi John,
View > Sort > Capture Time is checked, The cameras are in sync down to the second, and images from both have been merging and sorting fine for over two years, till today. Sort order is all set to capture time in all modes and views, but its still sorting first by camera. -
Will not display maps like APRS and photo's from some sites. Help please
I am unable to see the maps that I try view on screen. The page comes up and says:" Sorry, we have no imagery here". The terrain details are not visible, names however show up.
>name="Banner" --><img src="banners/2.jpg"
alt="banner"
Sounds like the work of Norton. Don't ever use the word
'banner' in any part of your images. Rename the image and alt text
and see if that works. -
Can u create cluster and pooled tables in real time
hi
can u create cluster and pooled tables in real time.can u send data base tables name of above one.Hai Anil
For creating cluster tables first u have to create table pool ...
create a table and specify the fields and other tecnical settings and
then Goto EXTRAS --> Change Table Category and selct the Pooled table and activate it...
Then Create another table And specify the required fileds and also the settings and then
Goto EXTRAS --> Change Table Category and selct the Cluaster table and in Delivery and
Maintainence Properties mention the Pooled table that u created and activate it...
Regards
Sreeni -
can I retrieve contacts that I deleted from an email account on my IPhone that I no longer have access to? I have synced the contacts with my computer and have not synced since I deleted the mail account on my Iphone. Can I still retrieve the contacts on my home computer?
This might be a problem as it is a company mail account that I no longer work for.
Could I...
Plug iphone into pc and click Restore in iTunes?
Then using ICloud, retrieve all the data lost in the restore? -
my iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie
Launch iTunes, go to the Preferences, select Devices, and hover your cursor over the backup file for the iPod. That should show you the serial number, IMEI, and possibly the MEID.
The manufacturer ID will not help you locate the iPad, though. If you set up the Find My iPad service in the Settings prior to the iPad going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPad is turned on, connected to a WiFi or 3G network, and has not had the Find My iPad service disabled or the iPad been completely restored).
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards. -
When I imported my photos from iPhoto to Aperture, I appear to have lost all my keywords. Can I retrieve them and, if so, how?
How did you import them?
Keywords are preserved if you use either the Import iPhoto Library or Show iPhoto Browser methods.
Regards
TD -
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
Why can't I drag and drop music from a folder on my PC into my iTunes window?
Why can't I drag and drop music from a folder on my PC into my iTunes window?
I have not found any article that has answered this question. They have come up with things like open the side bar and it will work, or you are using wrong format of music. Now this all happened when I upgraded to iTunes 10 and has not worked since and it worked fine before. Music format is correct, I have even gone as far as copying a file already in iTunes and trying to add it again. As soon as the files enters the frame of iTunes the music files icon the pointer is carrying turns into a circle with a slash through it.
ITunes Ver. is 11.1.5.5 Windows Ver. is Windows 8.1 Pro with Media Center
Files I have tried adding are standard MP3, 256 kbps purchased AAC Audio file, MP3 converted by iTunes into a 256 or 320 kbps AAC Audio file. None can be draged and droped but all can added by going to File/Add File to Library... or File/Add Folder to Library...
Add items from your computer to your iTunes library
Do either of the following:
1. Drag a file or folder from the desktop to the iTunes window.If you add a folder, all the files it contains are added to your library.
2. In iTunes, choose File > Add to Library, locate a file or folder, and click Open.
I can add files and folders by doing number 2 above but can not doing number 1
I have gone as far as uninstalling iTunes and reinstalling per apple procedures below.
Steps
1. Remove iTunes and its related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order or only uninstalling some of these components may have unintended effects.I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
To resolve it from within Itunes I did : Edit, Preferences, Sharing.
I took the tick out of "Share my library on my local network"
Click OK.
Closed iTunes/
Reopened iTunes and I can drag and drop.
I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
Works fine now. -
I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?
Link the two Macs together and use iPhoto Library Manager
Regards
TD -
i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp
Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L -
In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE! Thank god Pages 09 is still there.
…and the other 98 missing features.
Just use Pages '09, which should be in your Applications/iWork folder.
Rate/review Pages 5 in the App Store.
Peter
Maybe you are looking for
-
Why do I get the message "Cannot send mail, the user name and or password for my email outgoing server is incorrect"? I use the same account, etc. on my iPhone and haven't any trouble sending mail.
-
Hi Experts! We have a requirement where we need to generate a report output in MS Power Point. Can somebody please provide your inputs and suggestions on this? Are there any test programs to check on the same? Your help is highly appreciable. Thanks
-
How do I build a Universe in Crystal Reports Server 2008 V1?
Hi all, I am new to Crystal Reports Server 2008. In another thread, I was advised that Business Views would eventually be phased out and that I should use Universes instead. How do I build a Universe using CRS 2008 V1? I cannot find the executable
-
Cannot play on iPhone 4S my purchased shared videos from iTunes
I was trying to access my purchased videos from iTunes on my iPhone 4S but it says "You do not have permission to access the requested resource."
-
IPhone 4 - Love the new design, BUT worried about the antenna.
I want an iPhone4, it looks great, and has everything I would want. What worries me is the fact that the antenna is on the outside of the phone, all around the edges. I remember that most radiation from cell phones comes from the antenna, where the s