I can't scan with my HP Photosmart Plus B210a, I get a "Failed to open a session on the device" message everytime I attempt to scan to the computer. I'm using the most current driver off the HP website for Mac OSX Lion 10.7

I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.

I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.

Similar Messages

Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion?

Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion? The Apple website for this is "under construction" for weeks now...
Thanks,
[email protected]

Certification test for OS X 10.7 Lion are not available yet. I assume they will be nearly identical to the test of 10.5 and 10.6. Hopefully, the reason the certification website has been down for a while is that they are updating it with the new information. Though I really wouldn't expect any 10.7 certification test to be available for 2-4 months. Peachpit Press didn't publish their training material for 10.6 until October even though 10.6 was released in August.
As far as the 10.6 Certifications:
Certified Support Professional, 10.6 requires the 9L0-403 exam.
Certified Technical Coordinator, 10.6 requires the 9L0-403 as well as the 9L0-510 (Server Essentials) exams.
The information for the Certified System Administrator, 10.6 is "hidden" on the integral7 website but according to this Wikipedia entry, you need to pass the 9L0-510 Server Essentials exam as well as these three:
Directory Services
Deployment
Security and Mobility

How do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Is it wise/ok to use and external hard drive that requires Tuxera NTFS for Mac.dmg to be installed?

I had a white screen issue twice recently and freaked out. I got everything back but worried now that my imac will crash and I will lose
all my files/pictures. I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac. Is this a good way to back of files on a Mac? If not what is better? Is there an Apple product for back up?
Please help I am clueless and worried about the dreaded white screen!

sketchgirl wrote:
I purchased an external hard drive, a Toshiba Canvio 3.0 Plus with 1TB to install to backup my files. I went to
install it and it says that for Mac you must install Tuxera NTFS for Mac.dmg, which says it enables read/write support for the NTFS
partition on your Mac.
Depending on whether you need to use this as a boot drive and what model iMac you have (PPC or Intel) you will need to reformat the drive as a GUID or APS drive with Disk Utility. OSX Tips: Using Disk Utility: Format, Erase, or Reformat a Drive

Can I get SQL Server for mac OSX Lion?

I am taking a class in IT Tech and I need to install SQL Server on my mac is there any way to do this without going through third party apps?

No, you will either have to use Boot Camp and install Windows and dual-boot, or get something like Parallels and install Windows. Either way, SQL Server is a native Windows application and you just can't 'run it' on a Mac.

Hi i need drive for printer canon mf3200 for mac osx lion

i need

Searching Canon's site for MF3200 drivers gives this MF3240 page with only Windows® drivers...
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3240?selectedName=DriversAndSoftware

EPrint on Photosmart Plus B210a

I can't enable Web Services on Photosmart Plus B210a. When I try, appears on printer's screen this message:
"There was a problem connecting to the Server. Touch Retry to connect again, or OK to Exit".
I press Retry again and again but I only receive that message. How can I solve this issue?

Hi Adriano
Apologies if you have tried all these already
Have you assigned a static ip address to your printer . If so have a look at this thread where an issue like yours was solved
Heres a link to a thread where the issue was similar to yours
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Unable-to-Connect-to-Web-Services-Server/m-p/4...
and
Here are some steps that solved a sililar issue to yours
Try these steps and check if printer connects to Web Services or not:
1) Turn OFF the wireless radio
2) Perform Restore Network defaults from the printer menu
3) Turn OFF the printer and unplug the power cable from the back. Wait for 5 min
4) Reconnect the power cable and turn ON the printer
5) Run the wireless setup wizard from the printer menu.
6) check if you are able to print and scan
7) "Remove Web Services" from the printer menu and wait for 2 minutes
8) "Enable Web Services" from the menu and wait.
This should print a page automatically.
Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
(Although I am an HP employee, I am speaking for myself and not for HP) I am not a expert on all our products, but I'll do my best to help you.

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?

You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

Is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ?

is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ? because i dont have that much memory and i wanted my external hard drive to be the source for my music files and not my computer.

Many users keep their iTunes libraries on external drives. You just have to remember to connect and power up the drive before launching iTunes.
iTunes for Mac: Moving your iTunes Media folder:
http://support.apple.com/kb/HT1449

HT1807 I am traveling from the USA to Kuwait, can I still use Whatapp if I turn off the voice and data roaming capability?

I am traveling from the USA to Kuwait, Can I still use Whatsapp if I turn off the voice and data roaming capability?

If you turn off voice & data, you can only use wifi.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several project 'missing file' - but they were all there working fine before I updated.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several projects 'missing file' - but they were all there working fine before I updated. I am working off 2 external drives - not sure if that would make a difference.

After the update each seperate connected drive should now have a seperate Library.
The older Projects and Events folders would have to be at the top level of those drives go be seen and updated.
Were all the necessary Projects and Events in the corrrct place before updating?
Al

I can't scan with my HP Photosmart Plus B210a, I get a "Failed to open a session on the device" message everytime I attempt to scan to the computer. I'm using the most current driver off the HP website for Mac OSX Lion 10.7

Similar Messages

Maybe you are looking for