I can't see both the phones on my account through "My Verizon"

I want to upgrade my wifes phone but when I go to my Verizon Wireless page, it only shows my phone, the main number.
How can I get in to view and upgrade her phone?

Nevermind..  resolved this issue.

Similar Messages

  • Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?

    Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?  My friends are complaining that they can see all the people in the group; also when I get a response from some in the group, it comes to me ane many others in the goup - its like they've replied all. 
    Any help would be appreciated.
    iPhone 4; iOS5

    Sorry it hasn't worked out for you. I threw together a simple project that uses rectangles to represent your Bike and wheel groups. They all animate across the canvas in the bike group and the wheels rotate. I have attached screen shots so you can see how they are constructed.
    This image showsthe bike group where the orange rectangle and green circle represent the frame. The white rectangles represent wheels and the green and red rectangles I threw in to represent a wheel that has multiple objects in its group as your wheels do.
    Here the animation across the screen has started and notice all wheels rotating and staying with the frame.
    Again a little further down the timeline.
    I put this one in so you could see the group bounding box around the red and green wheel Good luck with your restart on this project and I hope these screen shots are helpful.

  • How can I remove both the old (deprecated) sync account and the newer one from my device?

    I want to remove both of the two Sync accounts from my device's system settings.
    I'm using a kitkat based ROM: CM11 on a Samsung S2.
    Thanks.

    Thanks. This is what I tried before asking here, but now it worked because I removed the deprecated account first. Then, after a couple of crashes by the Exchange Service, both the profiles are gone. After all, CM11 are nightlies. :)

  • I had to replace my hard drive and can't get my Photoshop CS2  9.0.2 to activate.  I have tried both the phone and the website and have both the serial number

    I had to replace my hard drive and can't get my Photoshop CS2  9.0.2 to activate.  I have tried both the phone and the website and have both the serial numbers.  I can't find a number that works to speak to a live person at Adobe.  I need to reduce the pixel size TODAY on some photos and need the program.  Is there another way to reduce pixels if I can't get my Photoshop running today?

    Intertech Design wrote:
    Where do I get the specially assigned serial number?????  I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
    Follow the prompts at the link provided by Ned.
    Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
    It's free for existing owners of CS and CS2. Nothing more to purchase.

  • My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

    My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

    Turn off Find My iPhone in iCloud on the iDevice.
    Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
    Use Settings > Reset > Erase All Content and Settings.
    Then set it up as a new iPhone with your own Apple ID.

  • In St07 there we can see both the hostname but DB is virtual IP

    Dear All ,
    I have one query regarding Stand Alone DB server  .
    We have 2 node of server 1 active and 2 pacive   for sap there is one virtual IP and one for  oracle virtual IP.
    Now my question is when we run st07 there we can see both the hostname name under SAPOSCOL destination.
    So  is a Stand Alone DB server and can we start the OSCOLLECTOR for this server .
    I have tried to run sm35 to but in Exec. Target it is giving only one server name that is Application server. So how can we run the report on DB
    Regards,
    Kumar

    I believe we are using file shareing, not photostream

  • Suddenly I can't see ALL the photos on my 4s or 6 from my PC. They are all on the phones .

    Suddenly I can't see ALL the photos on my 4s or 6 from my PC. They are all on the phones .

    You're going to have to describe your network configuration in rather more detail, and start segmenting the problem space into smaller hunks.
    If your network is larger or externally managed or otherwise outside your bailiwick, go talk to your local networking group. It's quite easy to have a subnet router instantiate or a vLAN change made and have the results block the mDNS traffic. mDNS traffic doesn't typically pass across subnets; across IP routers. It's also feasible for a firewall to block mDNS traffic. And managed switches can also get involved here, even if you're not running vLANs.
    It's distinctly possible there's also some sort of a local problem, but if multiple or all computers everywhere here stop showing mDNS, start looking for the commonality; for the common factor(s).
    mDNS is also variously known as Zeroconf and Bonjour.

  • ICal 'on my mac' to iPhone - How can I see on my phone, the entries in calendars under 'On My Mac'?

    iCal 'on my mac' to iPhone - How can I see on my phone, the entries in calendars under 'On My Mac'?
    I have several entries (too many) on calendars created prior to iCloud. They are listed as calendars 'On My Mac'. How can I get this information to my phone? I understand that iCloud makes On My Mac calendars obsolete?
    I use my phone calendar to see my duties for the day, and only add entries if I'm out and on the fly. These I don't mind typing into the iCloud calendars. But my regular process when I'm sitting in front of the computer is to add them via iCal using the On My Mac calendars created years ago, over time. I need to see this information while on the go. How can I?

    Welcome to the Apple Community.
    Create a new empty calendar from the iCal file menu, select which account you want to create it in.
    If you have only a few appointments you can move them individually by editing them and changing the calendar in the edit options.
    Alternatively you can copy all the appointments in one calendar to another and delete the original.
    To copy a calendar ctrl-click on it from the menu that appears when you select the calendar button (top left corner of iCal) and choose export (export it to your desktop for ease)
    Double click the exported file and choose the new empty calendar to import them into.
    Ctrl-click on the original calendar from the menu that appears when you select the calendar button and choose delete.

  • I want to see both the ssid in same time

    help in aironet 1200
    i hope to help me,
    i have created two ssid with two vlan's but the broadcast is for one ssid only, i want the broadcasting for all my ssid in same time. where that the one ssid be appeared and other one be a hiden.
    so how can i do that?
    I want to see both the ssid in same time
    EXD-AP#
    EXD-AP#sh run
    Building configuration...
    Current configuration : 4617 bytes
    version 12.3
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname EXD-AP
    ip subnet-zero
    ip domain name Schoch-home.com
    ip name-server 172.16.0.3
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server tacacs+ tac_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa session-id common
    dot11 vlan-name test vlan 1
    dot11 ssid EXDINT
       vlan 30
       authentication open
       authentication key-management wpa
       guest-mode
       infrastructure-ssid
       wpa-psk ascii 7 14120A0F410D243F04796166
    dot11 ssid GUEST
       vlan 20
       authentication open
       authentication key-management wpa
       wpa-psk ascii 7 13000F1646050A3E0B777A62
    username 78e400ed9588 password 7 06515724181E591C014E475354
    username 78e400ed9588 autocommand exit
    username 001e65ee5c38 password 7 135547430E5A512F2E712B606D
    username 001e65ee5c38 autocommand exit
    username 002668ec5b49 password 7 144742595A52722E277D31617B
    username 002668ec5b49 autocommand exit
    username 0022fc5b437b password 7 15425B5E562C28712A67667511
    username 0022fc5b437b autocommand exit
    username 00234d9fa256 password 7 075F711E1D5D1D5C1113595952
    username 00234d9fa256 autocommand exit
    username iqbal privilege 15 password 7 00010B02240A5955
    username c417fea872a3 password 7 04585F575827494F514E571641
    username c417fea872a3 autocommand exit
    username 0016cf264d57 password 7 040B5B5759224A1C5F4D014245
    username 0016cf264d57 autocommand exit
    username exd-hq privilege 15 password 7 00010B02240A5955
    username 00268202706b password 7 15425B5E527279747A64657411
    username 00268202706b autocommand exit
    username 002314054ea0 password 7 091C1E5B4A5443425E58012B7B
    username 002314054ea0 autocommand exit
    username 002436e8f6ca password 7 1249554546585A01722D722B32
    username 002436e8f6ca autocommand exit
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers tkip
    encryption vlan 30 mode ciphers tkip
    encryption vlan 20 mode ciphers tkip
    ssid EXDINT
    ssid GUEST
    speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
    station-role root
    interface Dot11Radio0.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    bridge-group 20 subscriber-loop-control
    bridge-group 20 block-unknown-source
    no bridge-group 20 source-learning
    no bridge-group 20 unicast-flooding
    bridge-group 20 spanning-disabled
    interface Dot11Radio0.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption mode ciphers tkip
    speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    interface Dot11Radio1.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    bridge-group 20 subscriber-loop-control
    bridge-group 20 block-unknown-source
    no bridge-group 20 source-learning
    no bridge-group 20 unicast-flooding
    bridge-group 20 spanning-disabled
    interface Dot11Radio1.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface FastEthernet0
    ip address 192.168.30.10 255.255.255.0
    no ip route-cache
    duplex auto
    speed auto
    hold-queue 160 in
    interface FastEthernet0.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    no bridge-group 20 source-learning
    bridge-group 20 spanning-disabled
    interface FastEthernet0.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.30.10 255.255.255.0
    no ip route-cache
    ip default-gateway 192.168.30.1
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    control-plane
    bridge 1 route ip
    line con 0
    line vty 0 4
    end
    EXD-AP#
    EXD-AP#
    EXD-AP#

    I think that my AP not support the MBSSID doue to it's very old , can  update it ? if i can that how i do that?
    System Software Version: Cisco IOS Software
    Product/Model Number:
    AIR-AP1210
    Top Assembly Serial Number:
    FHK0712J02R
    System Software Filename:
    c1200-k9w7-tar.123-8.JEA3
    System Software Version:
    12.3(8)JEA3
    Bootloader Version:
    12.2(8)JA
    System Uptime:
    3 days, 32 minutes

  • HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.

  • Iphone 4 i was updating the phone version and it wiped everything and wont see/recognize the phone at all? please help!

    iphone 4 i was updating the phone version and it wiped everything and wont see/recognize the phone at all? please help!

    If you have a backup, you can restore your last backup with itunes.
    Regards,
    Giuseppe Pignataro

  • Is there a phone number where I can call someone? The phone number in your web page is missing a num

    Is there a phone number where I can call someone? The phone number in your web page is missing a number. it is listed as 1-800-426-570? One number missing. I just paid with my credit card online for photoshop and it is not allowing me to log in in order to download.

    If I click on the adobe.ly link Rajshree gave you, above, there is a phone number at the bottom of the Customer Support contact webpage.
    This is the number I see when logged in with an AdobeID associated with the US is:
    800-833-6687
    It is possible that you are somewhere else in the world and the webpage is smart enough to give a different phone number, so the number I see may or may not be applicable to where you are.
    It also may be advisable to use the Chat instead of the phone, because it may be easier to understand what someone is typing than trying to interpret their English through whatever accent they are speaking with.

  • Can I see when the last time a user logged was?

    Can I see when the last time a user logged was?
    Both in local directory and Open Directory

    I got the last ~10 logins on the computer, but not the last time a specific user was logged in.

  • Two gmail accounts set up in outlook thru google sync. how can i see both of them in reading dashboard

    Two gmail accounts set up in outlook thru google sync. how can i see both of them in reading dashboard. I want to see bothe accounts with all folders on dashboard

    Hi,
    Since the issue is on Outlook through Google Apps Sync, I don't have the environment to test it for you, the support that I can provide is limited.
    Anyway, I still want to know, what did you refer to by "dashboard"? Do you mean the Navigation Pane on the left side?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How can I view both the layers panel & effects panel in PSE 11?

    I have PSE11 and purchased Paint the Moon effects.  How can I view both the Layers panel and the Effects panel at the same time?  Was this an option in older versions of PSE that are used in the Paint the Moon tutorials?

    At the very bottom right of the editor window click the little arrow to the right of the More button and choose Custom Workspace. Then your panels will behave the way they did in earlier versions--you can drag them out of the bin, see more than one, remove panels from The Clump, etc.

Maybe you are looking for