I can't see the font names in the TYPE - Font pull down menu?

I can't see the font names in the TYPE - Font pull down menu? The fonts are in there, but I can only see the name as I scroll past each one - almost like they are white text???

view,
I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.
Obviously, this also influences some other things so there may be a downside to it.

Similar Messages

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Can't "see" User account name in the GUI anymore ...

Hello Community
    Using WS2012 I created user account in AD. I right clicked a user account and chose "Move".
    The problem is my finger slipped and hit other keys.
    Now I can't see the user account anymore.
    When I run the following command:
        get-aduser -filter 'Name -like "user1"' I get the results below:
            DistinguishedName : CN=user1,DC=<DomainName>,DC=<SomeName>,DC=us
    The problem is how can I "see" what folder name, OU or the group's name that user1 resides at in
the GUI?
    Thank you
    Shabeaut

If I understand well, you were able to get the user DN. Based on the name, the user account should be directly under your domain (Not under an OU or a Container). So, use ADUC and select your domain. Once done, you should be able to see the user account.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I can't see the font names or examples in the pull down menu

something happened and now I can't see font names in the pull down menu.

Which Adobe software?
Which operating system?

How-can-i-remove-my-skype-name-from-the-sign-in-sc...

Guys this is absolute rubbish feature of the login application where people's login names get recorded in the dropdown menu. Is there any more permanent way of getting rid of this annoying privacy intrusive "feature"? I would like to have a profile with a username that is not going to appear at airports and my grandma's laptop after I log out of skype and no I do not want to go digging for app files to remove my entire history on each and every machine I use as suggested by your help files. Could you please advise if I'm missing something here?
https://support.skype.com/en-gb/faq/FA11070/how-can-i-remove-my-skype-name-from-the-sign-in-screen-i...

Unfortunately, the option to remove that feature is not available.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

In iMovie, I can't see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4

in iMovie, I can’t see my iPhoto videos in the event library. Why ? this is after updating to 10.7.4
also, if I want to use a picture in my movie, it says 'Open iPhoto to see photos from your iPhoto Library in this list.'
It never use to do this.

JimHdk,
thanks for your reply, but why I could wtach the videos on land mode using the ios 6 and why I can't watch them using this new ios 7 on land mode?
i give you the name of the videos : BJJ OPEN GRD, BJJ THROWS 1, BJJ THROWS 2, BJJ ChoKes, BJJ SWEEPS,
I work with this, I study watching the videos, and please, I need to resolve this,
thanks JimHdk for you help and cooperation

How can I add the controller name in the subject of Alarm emails? PI2.1

How can I add the controller name in the Alarm emails in PI2.1? This would make it much easier to scan the mailbox and see what devices are affected.

Thanx for your reply. No, although helpful, that's not what I meant. In outlook, the first line of the header contains the full username follow by a horizontal line. Under that, the default headers like To:, From:, Subject: etc follow.
I need that firstline printed so we know instantly from which user the email was printed (the To: field often is the same name of the sender of the mail, therefor you won't know WHO printed it...).

Can I change the Caption (name) of the button Go for the dashboard prompt

Hi,
Can I change the Caption (name) of the button Go for the dashboard prompt
I need to change the name of the button to Set Prompt Values.
i did not see an option to do this
Thanks

Hello Yusuf,
First follow the forum Etiquette, see this http://forums.oracle.com/forums/ann.jspa?annID=939
You have to close the answered threads...
And regarding your question
Go to *{OracleBIDir}:\oraclebi\web\msgdb\l_en\messages*
Open globalfiltermessages.xml file.
Find this text
<WebMessage name="kmsgGFPGo"><TEXT>Go</TEXT></WebMessage>Now edit the Go which is there between the TEXT tags..
Ex: i am editing Go to Confirm
<WebMessage name="kmsgGFPGo"><TEXT>Confirm</TEXT></WebMessage>Save this file and just restart your presentation service.
Check your dashboard prompt now...
(Editing this post from here)
As per your requirement edit should be:
<WebMessage name="kmsgGFPGo"><TEXT>Set Prompt Values</TEXT></WebMessage>Edited by: Kishore Guggilla on Jul 18, 2009 2:45 AM

Can I use firefox in webview? what is the package name and the activity name?

Can I use firefox in webview? what is the package name and the activity name?
I saw : intent.setClassName("com.tencent.mtt", "com.tencent.mtt.MainActivity");
but what is the name for firefox?

rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014

How can i see with a different size the letters and presentation of theRSA1

Hi gurus,
how can i see in a better size the windows of SAP BW, example RSA1, Business content, etc, now i got it too small i want to see it better, please step by step
thanks !

Hi,
in ur RSA1 session click on the customise local layout or press ALT+F12..
you will get a list of menu options..
click on font and change the font size and the font design to whichever u desire..
in the same customise local layout u can even change the color and do many other visual changes.
hope it was helpful..
Regards,
Kalpana

The item "(name of the song)" can't be replaced because it's invisible!!??!

I'm hoping someone can help me with this issue.
I've been backing up my song purchases to the time capsule but for some reason on half of my songs i get an error that says "*The item (name of the song) can't be replaced because its invisible*"
never had this problem before until now... not sure how to fix it. i can play my songs no problem but when i try to copy a song to the time capsule i get that error message. HELP!

The issue has nothing to do with your original files (I'm pretty sure) so the profession of being able to play the song in iTunes has nothing to do with it. The file that's "invisible" is not the original, but the copy that's already in the destination folder. OS X has LOTS of invisible files all over the place. Why didn't you know that before? They're invisible! Usually these are files the system needs for proper operation, but the user doesn't need to mess with (according to Apple!).
Now, how did your destination folder wind up with an invisible file by the same name as the song file you're trying to copy? I don't know, but what it looks like to me is that standard opperating procedure for the OS is to begin its copying process by first creating an invisible file in the destination folder with the proper title, then begin actually copying data. For some reason that Apple needs to fix, sometimes when the OS goes to start actually copying data, it sees the invisible file it just created and says "Oops! there's already a file there by this title! I can't put another one there!" Normally, it would ask you, the user, if you wanted to replace the existing file, but the file is invisible and therefore cannot be replaced, so it just tells you that.
What to do?
I LOVE the widget available here: http://web.me.com/hansen.m/Site/Widgets.html One trip to the dashboard, click on "Show", and viola! you can see that pesky invisible file in your destination folder. Now you can delete it. Sometimes this works and a second attempt to copy the file works. More often I find that I have to copy to a different folder on the destination disk. After that I can move it to the preferred folder (copying from the local hard disk to some other location - I run into this when copying to my idisk - seems to be part of the problem.)
In case that was about as clear as a toad's complexion, let me illustrate. I move files for sharing to my idisk every week. I click on a song and drag from iTunes, where I've already placed my recording, to a Finder window where idisk/Music/ReChording is already open, wait for the green circle with the white plus sign, and drop it. I get the message about not being able to replace. I access my dashboard and click "Show". Then I delete the now visible (grayed, but visible) offending file from my idisk. Then I click (in the Finder) on the idisk/Music folder, making it the destination. Then click on iTunes and drag the song to the idisk/Music folder. It copies. When it's done, I drag the file from idisk/Music to idisk/Music/ReChording. This copy has never given me a problem, and is nearly instantaneous, since no data needs to be copied.
Download that widget. It's a lot less painful than other workarounds. But Apple needs to fix this.
I hope that helps.

Can't see full song names in Music Store

Since the Music Store "upgrade" in iTunes 9 I can't see the entire name of the songs listed in the search results. The store only displays ~20 characters and some songs I am interested in buying are longer than that. For instance if I want to download a specific mix of a song and the store truncates the name with an ellipsis I have no idea which version I am looking at/listening to. Sometimes when there are many results there will be an option to "See All" and that has expanded fields, but if there are too few I'm stuck with partial song names. Am I missing how to expand the name field somewhere or is there another fix? BTW this is the worst version of iTunes I have used. It behaves like a windows app. GG Apple.

One way is to play a song's preview and note the information displayed in the iTunes progress bar.

I can-t see netTV from Mediaset on the ipad because I cannot install Silverlight. Is there any ipad compatible Silverlight version goin to be released? When? Or is there any other apple application I can use in place of Silverlight?

I can't see netTV from Mediaset on the ipad because I cannot install Silverlight. Is there any ipad compatible Silverlight version goin to be released? When?
Or is there any other apple application I can use in place of Silverlight?
I just want to see a service I'm paying for on the ipad instead of PC, it should be allowed!!!!
Roberto

I red about a Silverlight 5 version that should run also on ipad/iphone, annouced last year for 2011, but I can't find any recent update. On apple store you can find a silverlight 3 version at 5.99$, but it does not seem to be the same thing, just same name.
I'm not sure that this closure is a good policy from apple side. If I knew in advance I would never buy an ipad.

TS3367 i can't see my caller names in my iphone4s

i can't see my caller names when they call me only number is displaying so its difficalt to identify who is calling me

About AirPlay Mirroring in OS X
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

Can I change the "Organization" name in the Site License Information field?

This is a non-critical problem, but it bugs me every time I see it.
When I originally setup my OS X Server install some time ago, I mistyped my company name... so I have a single character out of place.
The admin GUI gives the impression you can change this information since it render this information in editable fields, despite the fact that I can change and even submit the changes with a "save" command... the changes never actually take place.
I was wondering if there was any way I could update this data. Any help would be appreciated since I'm constantly reminded of my mistake every time I logon to admin my Xserve.

You can rename the table within the mapping and then synchronize it with the new table, using the option "match by names". The fields must have the same names as the new table fields. New fields will be created in the table.

I can't see the font names in the TYPE - Font pull down menu?

Similar Messages

Maybe you are looking for