I can't see the smart guide at illustrator CC

i can't see the smart guide at illustrator CC,please tell me~

p,
Nothing to tick in the View dropdown list (View>Smart Guides)?
If not, you may start from the top of the following list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Similar Messages

  • Can't see the artistic brushes in illustrator CS5

    can't see the artistic brushes in illustrator CS5

    Where exactly have you looked for them?
    Browsed the brushes libraries?

  • Too much contrast, I can not see the light pantone on Illustrator

    Since a few days my screen is too much contrast, I can not see the light of pantones Illustrator

    Check the "Enhance Contrast" slider in Accessibility or Universal Access system preference.

  • I can't see the icon for HP Smart Web Printing on my toolbar. Does anyone have a suggestion​?cc=us

    I can't see the icon fro HP Smart Web Printing on my toolbar. How do I get it to appear?

    Please check your top toolbar left side, you should see a small arrow icon to expend the toolbar, located near the Tools option
    (Ignore the location side in the sample picture, it should be the opposite for your language )
    If you cannot locate the HP Smart Web Printing there either, Click Tools > Manage Addons
    and make sure the HP Smart Web Printing addon is enabled,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can not see the menu of New Business Components Package in jdeveloper

    I am just follow the developer guide.
    and when I create the Business Components Package, the guide said that
    ========================================
    In the JDeveloper Navigator, select the OA Project where you want to create your package.
    From the main menu, choose File > New to open the New Object Gallery.
    In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
    In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
    =====================================
    In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
    I can only see the File/new/buisness tier/ADF Business Components.
    And can not find the "Business Components Package" under ADF Business Components either.
    I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
    And I create an OA Workspace and OA Project.
    can anyone help?

    James,
    Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
    --Shiv                                                                                                                                                                                                                                                                       

  • Anyone notice the Smart Guides bug in CS5?

    ID CS5 has a Smart Guides bug when resizing frames to match the size of other frames.  When releasing the mouse after the Smart Guides pop up showing the sizes are equal the frame size changes.  When analyzing this it appears the frame does not resize to where the SmartGuides popped up but where the cursor is located.  There is also jumpiness between the position of cursor and where the Smart Guides pop up.  This behavior occurs vertically and horizontally.  While some jumpiness still exist, it works reliably when frames are aligned.  In other words, if a frame is resized to a point where two sides are aligned then the size of the frame does not change when the mouse is released.
    I have verified the bug in both Windows and Mac versions of IDCS5.
    None of the behavior exist with Smart Guides in ID CS4.
    Is anyone else experiencing this behavior?

    Thanks for checking Peter.
    I am using a laptop, Mac OSX 10.5.8, with ATI Radeon X1600.  The issue still existed wtih my Wacom tablet mouse and a Logitech mouse.  I also just uninstalled the program and reinstalled it and the issue still existed.
    This issue also exists on an iMac with Windows 7 running ID CS5 for Windows.
    Are you using a Mac by any chance?  The issue does not exist so much when the frames are aligned.  So, if you are trying it out and Smart Guides creates a line connecting the two frames you need to move them out of alignment.  Also, if your cursor is dead center over the edge of the frame all is ok.  What it's really doing is snapping to where the cursor is and not to where the Smart Guides popped up.  I'll be really surprised if you're not seeing it with a Mac.

  • JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

    Hello Experts,
    I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
    Do someone encountered this before? Please help
    Regards,
    Alfred

    Hello,
    I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
    Regards,
    Alfred

  • HT4061 I was working on Setting and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large

    I was working on Setting of my iphone4S, and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large screen. Please help me.

    Did you try to tap using three fingers?
    Turn Zoom on or off. Go to Settings > General > Accessibility > Zoom. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 123.
    Zoom in or out. Double-tap the screen with three fingers.
    copied from page 134 of the user guide iOS7

  • HT4437 I can not see the AirPlay icon on my iphone. Can anyone help?

    I am connected to the same WiFi network at my house through my Apple TV as well as my iPhone 5 but I can not see the AirPlay icon on my iPhone ! Can anyone help to guide me to connect my iPhone to the Apple TV so i can stream media on to my TV?

    Yes, under the Settings menu of my AppleTV, I have gone into AirPlay sub-menu and the AirPlay selection shows "ON", Onscreen Code is set to "OFF" and no Password is set up.
    I also have a Tick against the AppleTV listed under Speakers.
    Is there anything else I should do to enable AirPlay on the AppleTV or my iPhone?

  • I can't see the writing properly since all the changes.    Can i make it darker as its just light grey

    I can't see the writing properly on my iMac iPad mini or iPhone.  I feel like throwing them all out.. or selling them as no point in using them if I can't see the writing is just a light grey.  please can i change this to a darker script

    Hi there Chrisey01,
    You may find the Increase Contrast, Bold and Large Text, and Reduce Transparency options in iOS helpful for making the text more legible. Take a look at the User Guide page below for more options. Note: Reduce Transparency is found with the Increase Contrast setting.
    Large, bold, and high-contrast text
    -Griff W. 

  • I can't see the full game in the Flash Player screen

    This happens often, and I was wondering if I am missing something, as I can't find any threads anywhere on the internet which addresses this problem...
    The picture shows the game screen (this only happens on flash games).  I can't play ANY flash games with this player, as I can't see many parts of the screen (see below and right of game screen).
    I have Windows XP 5.1.2600 SP3 with IE 8.0.6001
    Adobe Flash version 10,1,85,3 installed
    Any ideas?
    Thanks

    Hi, the first thing is to make sure Flash Player is working correctly. Go to this test site and can you see the animation?
    http://www.adobe.com/software/flash/about/
    It will also display the version of Flash Player you have Installed.
    Then I would read the system requirements of the website.
    Also in Add/Remove, what listings of Java do you have Installed?
    Then I would go to Tools, Internet Options and make sure under the Security Tab, you have it set to Medium for the Internet Zone.
    Finally, go to this Troubleshooting Guide and make sure you have the Javascript Settings correct.
    http://kb2.adobe.com/cps/191/tn_19166.html    
    Thanks,
    eidnolb

  • How can i see the next page in smartform?

    i hav created a Second Page (%page 2) in Smart form.
    and in that page i created one Main window and a table.
    in 1st page, i defined the Next page as Page2 and
    in the second page i defined the Next Page as Page2.
    but only the 1st page is displaying. how can i see the next page?
    what i want to do in smartform...

    Hi,
    The second page will be displayed only when the data does not fit in the main window of the first page and continues to the second page.
    So make sure that you have enough number of line to print that it overflows to second page.
    Ajith

  • Where can i find the Content Guide of OBIA 7.9.6.4?

    I appreciate if you tell me where can i find the content guide of OBI Apps 7.9.6.4?
    regards

    A google search reveals this link - Oracle Business Intelligence Applications Documentation Library
    Also see MOS Doc 1527475.1

  • Can not see the data in the grid

    Hi,
    nice to see the new features, but I can not see the the table inserts
    in the data grid - the <data> rider is not clickable.
    Regards

    Hi annerose,
    This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
    1) Back up any important Raptor files, e.g. connections etc.
    2) Remove the existing Raptor Rel 1 installation folder
    3) Install Raptor Rel 2
    Hope this helps
    ady

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

Maybe you are looking for

  • Mail application will not open at all

    My Mail app won't open at all. It bounces once and then nothing. I ran the Disk Utility and re-started. I tried opening it with the Shift key down, and tried moving the Mail folder and the preferences files (but it won't open at all, so I don't think

  • Phone is NOT delivered; my bill made it. (Imagine going to a restaurant not eating and being given a bill.)

    I know exactly how you feel. After getting fed up with ATT, I ordered a wireless phone and service from Verizon. I tracked the package and Fed-Ex claimed to have attempted to make delivery attempts 3 times, but that's impossible since I was home 2 of

  • RMAN-06136: ORACLE error from auxiliary database

    Dear All, When i start to recover a tablespace(TSPITR) using RMAN, getting below errors. Could any guide me RMAN-03002: failure of recover command at 02/07/2013 14:12:30 RMAN-03015: error occurred in stored script Memory Script RMAN-06136: ORACLE err

  • Need to square various images - some tall, others wide - ideas?

    I have several thousand images. They vary in size and some are tall and others wide. I need to have all images square. Not wanting to lose resolution or have smaller images expanded and look bad. How can I make all of my images square? Which if any o

  • Order of buttons on quick sales order header

    Hello, We recently applied the december 2009 OM rollup patch in one of our development environment for testing and came to find that the order of the buttons on the quick sales order form OEXOETEL was changed to alphabetical ordering. So the only way