I can't seem to scroll in Mac Mail since I updated software, any ideas folks?

I can't seem to scroll in Mac Mail since I updated software to Mavericks--it's very annoying, any ideas folks?

oops, scrolling the text within the mail program using a wireless mouse.
If I quit the mail program it corrects itself, but then it suddenly becomes impossible to scroll with the mouse

Similar Messages

  • New Hard Drive, Mac partition cloned and boots fine, but I can't seem to get my BOOTCAMP (windows) partition to boot!  Any ideas?

    Hello all!
    I got a new hard drive for my Mac Book Pro and an enclosure so I could clone the old partitions on to the new drive.
    So I...
    Put the new hard drive in the enclosure.
    Booted up off an install disk and ran disk utility.
    Copied the Mac and Bootcamp partitions over to the new drive that was connected VIA USB.
    Turned off the computer, took the old hard drive out and put it in the enclosure.
    Put the new hard drive in the Mac Book Pro.
    Booted into Mac OSX with no problem.
    When I rebooted held down the option key to boot into the windows side, it didn't show up as an option.
    When I went back into the Mac side, I loaded Disk Utility and saw that I had the Mac partition, the BOOTCAMP partition, and a bunch of unallocated space.  When I went into the System Preferences and set the target boot drive to the BOOTCAMP partition and restarted, I got some crazy error about there not being any bootable info on it.
    That's where I am at.  I have found other posts with people who are having the same problem, but I have yet to find a solution that doesn't involve me buying some 3rd party software.  I know it has something to do with (what is called in Microsoft world) the Master Boot Record, but I don't know how to modify that to reflect that the BOOTCAMP partition is a bootable logical drive.  I remember in MS DOS land there was some command line FDSK /something command that you would run (I think it was /MBR) to reset the MBR.  To me though, all of these terms are shadowy figures in the Ether.
    What do I do???
    -Ricardo
    p.s.  I read somewhere to boot off the windows 7 disk and run the system repair tools. I tried that and no change.

    I got it. It CAN be done. At least on 10.6
    How I made it happen (for free) on Snow Leopard:
    1) partition, dupe etc all that jazz that you know. Make the mac side work, which it seems we've all been able to do no issues. I used SuperDuper! It worked just fine. (Had it on a disk. I assume you could use any other free way of doing this.)
    2) New hard drive running, I used bootcamp assistant to partition the new drive for a new Bootcamp. I don't know if it's necessary to make the new partition this way for some reason, but it's what the process ultimately included, so maybe try without, but it worked with.
    3) Natively running original drive on the windows side. Used DirveImage XML to clone windows partition onto new drive connected externally.
    4) Back on new hard drive running natively. (Sorry for all the switching.) You'll note that the new Bootcamp partition is NOT bootable at this point. It won't come up in the usual 'alt on startup' boot menu.
    Download rEFInd and install on mac side. Technically this is freeware or w/e, but for the love of god, throw money at this man. He totally deserves it.
    5) Restarting the computer, rEFInd's boot manager finally recognizes windows. But you'll find windows is a little messed up and still won't quite boot. Get out your Windows CD and pop it in. Do the 'alt boot' thing. Your boot menu options are now "EFI Manager," "Bootcamp," and "Windows Disk." Or some such. Holy Crap! It recognizes Windows!
    6) Boot to the CD and tell it to repair the windows volume. It will. My computer also had to do a disk check next time I booted to Windows, which took for-stupid-ever, but eventually worked. (I went to bed in between.)
    7) Everything is running smoothly. Plus, you get the rEFInd boot manager, which is also great.
    Deets: I have a late 2010 MBP 13". Snow leopard/Windows 7 32-bit (long story) Moved from original 320GB seagate momentus to new 750GB Seagate Momentus XT.
    Feel free to share/copy&paste this solution as you see useful. Cheers!

  • My fan(Left only) is running at high speed all the time since last update. Any ideas? (Mac OSX version 10.7.5 on 27" mid 2011)

    My left side fan is running at full speed all the time. I have downloaded free fan speed control app but does not help. Any advise

    Fan Control Apps/Utilities generally can only raise the speed of the fans and not lower them.
    Disable, turn off or uninstall whatever Fan Control that you installed and reset the SMC.
    see > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then if the iMac's fan is still running fast, you probably have a loose sensor cable or bad thermal sensor and the iMac needs to be taken into service
    see > Apple - Support - iMac - Service FAQ

  • I am trying to update my mac to OS X version 10.7.5 or later but can't seem to do it. Its been doing a software update since about 8pm last night and still hasn't completed.

    I am trying to update my mac to OS X version 10.7.5 or later but can't seem to do it. Its been doing a software update since about 8pm last night and still hasn't completed.

    What are you updating from?

  • I'm trying to update iPhoto 7.1.5 to current versions so I can get my photos onto iCloud to access from my iPad.  I can't seem to find an upgrade route that will work?  Any suggestions?

    I'm trying to update iPhoto 7.1.5 on my old iMac (running  10.9.5) to current versions so I can get my photos onto iCloud to access from my iPad.  I can't seem to find an upgrade route that will work?  Any suggestions?

    For Mavericks you need to upgrade to iPhoto 9.5.1.
    You cannot buy this version from the AppStore, since the current version is iPhoto 9.6, and that requires Yosemite. The easiest route for you would be to upgrade to Yosemite. Then you can simply buy the newest version of iPhoto from the App Store and can use iCloud Photo Library (iCloud Photo Library beta FAQ), once it has been release for the Mac as well early next year.
    If you want to stick with Mavericks, you'll have limited iCloud features, only the Photo Streams  (iCloud: iCloud Photo Sharing FAQ), but no iCloud Drive (iCloud Drive FAQ) and iCloud Photo Library.  And to upgrade iPhoto you need to buy an iPhoto '11 installer. It comes as part of iLife '11. You can try to buy a boxed version from Amazon or try to find it at eBay.  Once installed on Mavericks, download the iPhoto '11 updaters from the apple Support Downloads page.

  • TS4062 I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  Whats wro

    I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  What am I doing wrong or what should I look for?  Thank You

    To sync your iPad over Wifi:
    First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
    Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
    You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
    To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
    If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!

  • HT204053 I've recently changed my email address and my apple ID but sometimes I'm still prompted to use my old apple ID and password which I don't use anymore. I can't seem to be able to delete my old Apple Id, any suggestions?

    I've recently changed my email address and my apple ID but sometimes I'm still prompted to use my old apple ID and password which I don't use anymore. I can't seem to be able to delete my old Apple Id, any suggestions?

    Please follow these steps in order to get it working properly again.
    Please change your Apple ID back to your old email address (that you used as Apple ID before) here:http://appleid.apple.com
    Then go to all your devices - iPhones, iPads, Mac etc. - ("Settings > iCloud") and delete your iCloud account from this devices (+ turn off Find My iPhone, but I guess it will ask you that anyway)
    After that go back to http://appleid.apple.com sign in again, and now change your Apple ID again to your new email address.
    Finally, set up your iCloud account on all your devices again.
    Now, everything should working properly again.

  • I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

  • I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the  blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

    I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

    Uhhhhh... Thank GOD... Got all of my files.
    Spent some time on the phone with Apple Care... who was great to deal with but actually... not as helpful as I was hoping. It was suggested that I try DiskWarrior 4 to try to recover the files. $108 later, I had no files.
    More calls with Apple Care and they were pretty sure that everything was gone since once the External drive was installed, like a moron, I let TimeMachine go ahead and back up my new MacBook... so it overwrote who knows how many gig that was my entire MacBook.
    I wasn't giving up so I called Maxtor, the manufacturer of the external drive itself. They suggested file recovery software from I365... which is also a Seagate company (the makers of the drive). The suggested I simply use their demo because the demo version would find the files. If it found them, I could buy the software to restore them.
    It found them! Another $129 after and I was able to restore all of them back to my old PC laptop.
    NOW, I just need to figure out how to get the 50gig of HD video files off of my old laptop now and into my Mac and IMovie so I can actually make some DVDs out of them!
    I get that Macs and PCs are different formats but I think it is ridiculous that formatting still means basically just wiping out or at least treating massive lots of old data as if it isn't there. There's gotta be a better way to do that.

  • TS1394 my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

    my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

    Bad choice, since the cost is exorbitant. Snow Leopard ($29 USD) is available from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
    Additionally, you can get a MAS redemption code via the same route. See https://discussions.apple.com/thread/4140947?tstart=0 for details.

  • Can you recommend how I can create an HTML signature for mac mail?

    Can you recommend how I can create an HTML signature for mac mail?

    http://matt.coneybeare.me/how-to-make-an-html-signature-in-apple-mail-for-maveri cks-os-x-10-dot-9/

  • Can't see my documents/pictures on all my devises since I update software to SO8

    can't see my documents/pictures on all my devises since I update software to SO8- Apple said the drivers are not updated on my Mac - that an update will coming soon to fix this problem - now I see an update to OS X Yosemite - but for the reviews/comments seems like this is not going to fix the problem it looks like is going to make it worse - seems like better not update it - I have problems already - any comments from anyone?

    Mac Pros don't run Classic operating systems.      Mac OS X 10.8 is Mountain Lion.      See options for data recovery here: http://discussions.apple.com/docs/DOC-1689

  • Is it possible to write in superscript or subscript in mac mail since the OSX Mavericks update? At the moment I have to copy and paste from Pages!

    Is it possible to write in superscript or subscript in mac mail since the OSX Mavericks update? At the moment I have to copy and paste from Pages!

    I tried to figure this out myself and couldn't believe there wasn't a simple menu item to get this done.  Seems there was in pre-Mavericks but not in Mavericks.   Found several answers but they all reply to before Mavercks.
    This is helpful and yet I'm left with "Wow!  Apple really can make simple things difficult.  Who would have guessed."

  • My Mac Mail program no longer stores any files in my Sent folder.  When I try to send an e-mail it just spins.  What's up?

    My Mac Mail program no longer stores any files in my Sent folder.  Moreover, the sent folder (off to the left) contains a highlighted "1" as if something is in there.
    When I try to send an e-mail message, it simply spins.
    This is new behavior for my Laptop of three years.  Usually, I have lots of messages in my Sent folder and can easily send e-mail.
    I see no discussion forum for "Mail" or for "e-mail" so I raise this question here.
    I would appreciate any help anyone might offer. 
    Thanks.
    norman from akron

    Thank you for your reply.  Turns out, re-started my Macbook later and the problem disappeared.  Could this have helped?

  • I can no longer send from my apple mail since icloud.

    I have made a mess of things. I can no longer send from my apple mail since icloud.  My outgoing mail remains offline no matter how I reconfigure it.
    How do you check your tls certificate?  Is is me.com or mac.com?
    I am so frustrated.

    Hi philo f,
    If you are having an issue with printing from your iPad mini, I would suggest that you troubleshoot using the steps in this article - 
    About AirPrint
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Critical program error while opening some workbook

    Hi all, We are in BI 7 with suppoprt package 12 and GUi version 710. Whenever iam trying to to open some workbooks system is showing the mesaage Critical programm error. I checked the trace file also but din t get anything . Th trace file is saying:

  • ISE - Guest - permanent access for specific device

    Hello, In brief: I'm using ISE 1.2, 5508 wlc and few 3702-I APs - brodcasting 2 SSIDs: Internal and Guest (Internet olny). Guest SSID forces user to provide username and password through guest portal. Is there any way to configure some policy on ISE

  • Query on PO report

    Hi Experts! I have one query.. Is there a report which can provide us with the following: -All POs for over £1000 raised between a range of dates     -The PO Numbers     - The Value of the PO     - Vendor Name and Number     - Who raised the orders  

  • Tables used for a Stock-In-Hand Report ?

    Hi, I need to generate a stock in hand report. For this report I only need to consider Purchasing Inventory Stock and not the Sales Order Stock. What tables do I have to use?, if possible the query! Thanks, Kishan

  • BDC PROGRAM FOR F-02 ERROR

    Hi , i have written a bdc program for f-02 .here we have 2 posting keys 31 and 40 .when i recored in shdb i can see when i use 31 posting key then i get 302 screen and when i use 40 posting key then i get 300 screen.But the problem is in 302 screen w