I can't share the project or export it, when click on share nothing appear ? what can I do ?

How acn I share or export the film project I made, because when my film is finish, I click to share, but nothing appear ?
So why and what can I do ?
I use Maverick the new one and imovie 10 for marvericks.

DOWNLOAD SAFARI AND RE-INSTALL to fix maps in IPhoto Places '09  8.1.2
I too lost my IPhoto Places maps on June 2nd.  Initially I used Best Buy's Geek Squad tech support.  The second tech was able to fix the problem.  He said there was a corrupt file in Safari, not IPhoto. However, I didn't know what he did to fix the problem.
A week later, the maps were gone again.  I tried to contact the same Geek Squad tech, but no luck.  I talked to several other techs, but they could not find a solution, even though I told them about Safari.  The last tech directed me to this web page.
It was here I learned about turning the WiFi off and on.  That restored the maps to the pictures, but not the Big map.
Today, at the Apple Store Genuis Bar, I was told they were unaware of this problem.  When I mentioned that Safari was where the problem was, he suggested I download Safari from the Apple Web page and re-install.
So far this is working!    So happy all of the maps after two plus weeks.
I hope this helps others too,
Peggy

Similar Messages

  • I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc.  The message I get says "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!

    I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3)  after installing ilife 11 from a disc.  The message I get is "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!  Any help will be greatly appreciated.

    Reinstall it.This time delete the receipts first.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Important:
    As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

  • Although I'm online and connect, the message "Error 206" appers when I download Creative Cloud. What can I do?

    Although I'm online and connect, the message "Error 206" appers when I download Creative Cloud. What can I do?

    Hello CAROLINA,
    Please refer the thread: https://forums.adobe.com/message/6255811#6255811#6255811 where similar issue has been discussed.
    Regards,
    Ratandeep Arora

  • My Ipad turned itself off for no reason and I can't turn it on. Not even when I'm charging it. What can I do??

    My Ipad turned itself off for no reason and I can't turn it on. Not even when I'm charging it. What can I do??

    iPad: Not responding or does not turn on

  • I have a PC Window 7 and I by a iPod nano but can't do the download of iTunes 10.5.2 for windows (64-bit), what can I do? Because I can get to the 99% of the download but after stop.

    I need to do the download and install the latest version of iTunes from start working with the iPod nano. I have a Laptop; Toshiba with Windows 7. The Laptop it's 2 years old and have space for the fill. I try to download the iTunes 10.5.2 more them 6 times, when get to the 99% 1 sec. reminding time it stop and don't do nothing more. I tried change the filter level to "Medium", them go to www.apple.com/iTunes/download and Run it again. The same problem shows up. I don't know if I'm doing this steps correct. Till now never connected the iPod nano to the Laptop. Why shell I do? Have it ON or OFF? And why can't I end the download?
    I don't know nothing about Mac till now just work with Windows and not for to long. Any kind of help it's well can.
    Any one, please. My little one is getting very sad because she can't start using her Xmas present.
    Thank you.

    Do you have specific problems with Flash that you needed to visit the Adobe help pages?
    Make sure that you allow the plugin-container.exe process in the firewall.<br />
    See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • How can I make the project into 16:9 when using 2 4:3 aspect ratio videos in project

    I want to make a project that is 16:9 but am adding a video of a talking head (speaker) fimed in 4:3 and I want to place that in upper left corner of project and then add a video of the powerpoint they were speaking to also filmed in 4:3

    There are a number of challenges to doing this, including the fact that doing so will require lots of rendering and the even bigger fact that, if you're planning to show this on a TV, up to 10% of the edge gets cut off, which means that any text you've got outside of the "safe zone" might be off the screen.
    But, with those caveats, place the upper left corner video on Video 1, select it and open Applied Effects. Open Motion and set the Position and Scale so that your video sits in the upper right corner.
    Add your images to Video 2 and do the same thing, setting Position and Scale so that it is in the lower left of your screen. Then add you main video to Video 3 and set its Position and Scale so that it is in the right 2/3 of your video frame.
    As I say, there are a number of potential problems with this kind of composite, so I'd recommend you do a very short test composition first, then output it and show it on the device or web site you hope to display it. That way you'll get the bugs out before you go investing a week's work into something that has you scrambling to fix at the last minute.

  • I need to reinstall Final Cut Pro Version 10.1.1 but can't remember the Apple ID I used to install it in 2012.  What can I do?

    For several days, I've been trying to upload Final Cut Pro but keep getting this message "restoring the window layout" but nothing happens.  Not even after 2 hours.  What have I done wrong and how can I redress this problem?

    Open your Home library (not the root library), Application Support/Final Cut Pro/Layouts. Drag the folder to the trash. Npw re-launch the app.
    Just to add…your subject line doesn't seem to  agree with the content of your post. If you can't remember your Apple ID, contact Apple.
    Russ

  • How can I change the default app to open when clicking on a YouTube video?

    Since Firefox updated recently, I cannot long-tap to open a YouTube video with a different player (wanting to use PVStar+). Now tapping opens up the YouTube player, despite the fact it is disabled. How can I open with a custom app?

    Change the '''Action''' for '''''mailto''''' in the Applications tab of Options.
    [http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

  • The screen is grey with a flashing square in the middle of which is a question mark. Nothing answers what can I do. I have disconnected and turned all if . But when I restarting the same flashing square with question mark turns up after the music and on a

    The grey screen flashing square with a question mark in the centre and nothing... Having disconnected all  but still the same when reconnected

    Hello Ariane,
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • I've made a successful dvdproject.  But now I can't reopen the project because it can't find a few photo files.  Aren't they already in the project?  The dvd plays fine.

    I can't reopen the project, because it can't find a few photos. 
    I thought those were already in the project, as cutaways.  (No slideshow)
    Also, in "Share" I exported to Desktop.  That gave me problems.  I don't see "package contents" anywhere.
    I got the .m4v file into iTunes, and got that into iDVD.  But now I can't reopen, because of the photos.
    I need a step-by-step "Share" routine to go by.
    Thank you

    Mr. Shippey,
    I thought the video and cutaways, inserts, etc. were incorporated during "Share". 
    And not even during the iDVD processing?
    I know you're supposed to find a "view package contents" when you right-click on.... something.
    Then you do that, and the .m4v file is in there. 
    I know somewhere there's a "Share" tutorial.  I don't have a good grasp of the whole "file structure".
    So I might wind up making copies of these iDVDs. 
    Will they be the same good quality?
    Thank you.

  • Imovie '11 won't let me share a specific project it says "quit imovie and reopen" how do i fix this and share the project?

    imovie '11 won't let me share a specific project that is no different from all the other projects.  Every time I try to share or export the project it says "quit imovie and reopen" this can't be a memory problem because I have a lot of memory left and it allows me to export other projects but just not this one.  How do i fix this and share the project ASAP?

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline.

    How can I burn a 60 min Hd video on a PC at best quality, I can't split the project in the timeline?

    Harbi
    I replied long before post 7, but my reply did not get posted...instead it remained unsent. I have been having computer Internet connection problems. I was able to recapture it from restore feature of posting. Below is what I wrote.
    Thanks for the reply.
    Just in case note....for a regular DVD player, granted it is important to have a video format that the player supports (namely DVD-VIDEO format); however, the other half of the consideration...the player needs to support the disc type (media type) that the video format is on. I do not know of a regular DVD player that supports DVD-VIDEO on a memory stick.
    If you have recorded PAL 1080i (1920 x 1080 @ 25 interlaced frames per second), that interlaced video exists with Field Order: Upper Field First.
    But, you end product DVD-VIDEO is characterized by Field Order: Lower Field First. If you run into this type of Field Order problem, then there are 2
    possibilities to get that taken care of
    a. Assuming that you are using Premiere Elements 11, 12, or 13....set the project preset (manually) to
    PAL
    Hard Disk, Flash Memory Camcorders
    Full HD 1080i25
    or
    b. Import the source media using
    PAL
    AVCHD
    Full HD1080i15
    and then, for each Timeline 1080i, right click it, select Field Options from the pop up menu, and then select Reverse Field Dominance.
    When you export to file, you lose the opportunity for menus. The only export to file with menus is found in the webDVD export which is
    in reality a flash file with menus. That might be a consideration for playback through the web browser such as Internet Explorer or Firefox.
    If putting a file on a memory stick is a working possibility, you might want to look also at AVCHD.mp4 1920 x 1080p25, but all depends on the
    support of the player.
    Lots to think about. If you need clarification on any of the above, please do not hesitate to ask.
    ATR

  • Failed to share the project

    Hi, bought the adobe story so I could be able to share my projects. But when I try to do it there is this message "Failed to share the project".
    I kust received a message saying that my payment confirmation for the Adobe Story Plus, Monthly had been received.
    is there a bug or anything?
    thanx
    daniel

    Hi Daniel,
    Is this happening for you for a specific project or for multiple projects? What happens if you retry, does the same error appear again? Can you also please share your story registered email ID and the project name that is exhibiting this problem by sending a mail at DL-AdobeStory-Support<at>adobe<dot>com. We will check and resolve the problem.
    thanks
    Sandeep

  • HT5624 My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

    My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

Maybe you are looking for

  • Macbook Retina 13"- slow drawing?

    Photoshop CS6 Extended 13.0.4 x64 Macbook Pro Retina 13", Intel HD Graphics 4000, Mac OSX 10.8.3 Hello, I installed Photoshop on my brand new Macbook and was surprised at how slow it was with retouching/drawing - eg signing my name with a paintbrush

  • Pick list generation error

    Hi all we implement an basic WMS based on ECC6 on out WH. Everithyng was fine for more than a year. Recently i tried to do some changes in purchare order area to create a new document type. I am not sure there is a link between these but when i tried

  • Weird Script Alert message

    Using PS CS3, I opened a few JPG images taken with a Nikon D100 a few years ago. I copy/pasted one image on top of another, flattened it and saved as a PSD. Later on, when I double-click on the PSD, PS opens and I get a script alert: "Nikon Corp, Nik

  • Time Capsule 6 hours uptime from new to crash

    this is my story, I bought a time capsule in Puerto Rico (in an apple store, Plaza de America Mall) five days ago (I was on holiday), when returning to Spain, today friday, i installed the TC and everything set up perfectly for 6 hours and then the T

  • New Download 2004S for linux does not work

    hi, I have downlowded the 4 iso images for 2004S. Then I usded the cat function, but there was no possibility to view the folders. When I tried to write it to DVD, there was a error " no iso 96.. image" and it does not work. Any suggestions? thanks D