I can't submit (button is gray)

Everything is all right, (I think) Settings destination, targets, ... But I simply can not submit.

Hi there,
My first post. I had the same problem - when I clicked on submit in Compressor the drop down box appeared and in the Cluster box it said "none" and the submit button was greyed out. I've fixed mine and it works perfectly now. Here's how:
Go to System Preferences and select Sharing. A box appears with your computer's name at the top and a list of things you can share. Select File Sharing and to the right, it will say something like: FTP Access:On with a message underneath which contains your computer's IP address e.g 10.6.4.3. Make a note of this number.
Open Compressor and go to Compressor > Preferences. The Preferences Dialogue Box appears and at the bottom it says: Enter IP addresses or ranges for manually selected computers. Click on the + button at bottom left and then enter your computer's name and the IP address you noted earlier. Online will probably appear under status.
Next time you start a job in Compressor and click on submit the drop down box will now say This computer in the Cluster box and the submit button will no longer be greyed out - BINGO
this is what I did and it worked for me. Good luck.
Fingers Lee

Similar Messages

Project Server 2013 - Workflow Execution " Submit button is grayed out. "

Dear All,
As i was in progress to making workflows in sharepoint designer this is my first project of implementing project server 2013 and executing the workflows,in the continuation of this i followed below mentioned link to go through the process of WORKFLOWS but
got some issue
LINK: http://msdn.microsoft.com/en-us/library/office/jj163494(v=office.15)
ISSUE: Is that the SUBMIT Button is grayed out after saving initial proposal plan. Snapshot is attached.
I have checked in/out process along with this gone through re-executed the whole process same result occurred.
Suggestion/Help needed...
REGARDS DANISH DANIE

Hi Danish,
Its a common thing which users are experiencing.
When you create project from workflow click on Submit it take time for transition before transition it check all the condition which you have set for workflow stage. As per your screenshot it is waiting for details in PDP (Provide details of the proposed project)
when you click on submit it push data into the database,sometimes it send e mails to stakeholder then it use exchange and take times to send e-mails and for transition too.
When you/user face this issue ask them to wait for some time or close the file then reopen.
In the screen workflow is waiting for Project detail information in PDP that is why it is still in process and not going to next stage.
kirtesh

I've set up an event and published it, but it won't allow for registrations. The SUBMIT button is grayed out. Thoughts?

I've set up an event and published it, but it won't allow for registrations. The SUBMIT button is grayed out. Thoughts?

The submit button is greyed out in case the registration page is being viewed in preview mode.
Please check if the following string is present in the event registration URL:
"preview=true"
If it is present, please try by removing this string.
Thanks,
-Nitin

Can the submit button be deleted

For the convenience of our learners, my manager would like me
to delete the submit button from the multiple choice questions we
are using in our movie. He would Captivate to provide feedback
immediately after the learner clicks his/her answer in the radio
button. Is this possible?
Note that I have tried making the submit button transparent
and placing it behind the radio buttons for all answer options.
When this is done and an attempt is made to click a radio button,
the radio buttons are unavailable and a failure message appears.
Apparently, the submit button is over the radio buttons or at least
not transparent so that they can be affected.
JazzAl

Rick:
One more thought about eliminating the Submit button on
multiple-choice questions.
I now know that:
1. I cannot delete the Submit button from a
Captivate-generated multiple-choice question
2. The function that the Submit button performs must be
retained in multiple-choice questions to enable the scoring
function, which I want to retain.
3. Although I can make the Submit button transparent and put
it in the same location as the answer options' radio buttons to try
to make the learner's one click (that selects the answer option)
activate both the radio button and the Submit button, the result of
the click will be only clicking the Submit button. The radio button
does not get marked as being selected.
I would like to do some further work on trying to allow the
learner to select his/her answer and click the Submit button on one
click.
On the theory that the radio button and the Submit button
cannot be selected in one click because the is because the Submit
button is in front of the radio button, I wonder if it might be
worth it to try to go into the files that support the building of
multiple-choice questions and attempt to change the layering order
so that the radio buttons are in front of the Submit button? Do you
think can be done? Do you think it might work? Thanks for any
insights you might have on this idea.
JazzAl

Can a submit button carry out more than 1 action ?

I want to give show feed back after a survey question but I want to do this whilst the answer that the user has given is still on the page.
I have assigned a show comand to the submit button which makes a text box visable however the play head carries on and the slide progresses to the next one. Is there a way to pause the time line and advance on a click after the feedback, what I think I want is for the submit button to carry out several action or am I going about this the wrong way?

Hello,
Could you tell if you are using the default Question slides for this survey question or did you create your own slide using standard objects?
I'm a bit puzzled about it because you mention the 'Submit' button, that is why I supposed you are using a default Question slide. You can assign an advanced action which can have more than one action of course. But this will not solve your issue. If you want to stick with default question slides that allow you limited control I could make this suggestion:
create the hidden text caption,
increase the default duration of the question slide; typically it will pause at 1.5sec, increase the slide duration so that the text caption that will show up stays long enough for the user to read it
show the text caption for the rest of the slide
attach the success action to the Submit button as you did to show the TC
When the user clicks on Submit, the Text Caption will pop up but the playhead will continue till the slide is finished. AFAIK you will not be able to stop it, but now the user will have sufficient time to read.
The best solution is to create your own survey slides, then you can add as many interactive objects as you wish.
Lilybiri

Can a submit button send forms directly to an email address?

Hi, I'm just trying to design a form for an online business and am wondering whether I can have all forms sent directly to an email address to notify me of an order. I have Acrobat 9 Extended and Windows 7. Cheers

Yes, when you set up the Submit Form action, specify a mailto type URL. Make sure mailto is lower case and there are no spaces, something like: mailto:[email protected]
If you want Reader users to be able to send the entire PDF, it must be Reader-enabled: Advanced > Extend Features in Adobe Reader

After answering the three security questions on itunes connect the submit button is still grayed out. It looks like it could be an error on the website. Has anyone encountered this issue?

After answering the three security questions to update an app on itunes connect the submit button is grayed out. It looks like an error on the website. Has anyone ran into this problem before? Any help would be greatly appreciated.

Hi evanVIT,
Welcome to the Apple Support Communities!
I understand that issues like the one you are experiencing can be very frustrating. For this situation however, for update errors in the range of 3000-3020, I would recommend the troubleshooting steps located in the attached article. Please use the steps and information as a reference.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
Cheers,
Joe

Submit button inactive

The submit button is grayed out on two of the 8 surveys sent. Why would this be the case when the survey is still active. I am testing this product before purchasing and I can't have this problem with a live survey.

@7. 715-834-9596 : Please send the form URL to [email protected] and let me know the browser/platform/devices that you are seeing this problem.
@Collegewise: I believe your issue is fixed when you use Adobe Reader. I think 7. 715-834-9596 is responding back to my intial question.
Thanks,
Lucia

How to open a new OAF page in new window while clicking submit button

Dear All
I am facing one problem.I have to pass some parameter in new page only after validation.I can't do validation in processRequest bacause I perform validation after clicking the submit button.
So I have to write redirect code in processForm Request. I can not use simple "Button" bean since I have to set destination uri which could be set only in processRequest.But I can not pass parameter with it in process request.
Thats why I have decided to use submit button but there is not target frame option in property inspector,So I am not able to open it in new window.
Kindly give me some suggestion .
Thanks in Advance

hi,
u can use submit button. U need to handle submit button press in processFormRequest method.
if(pageContext.getParameter("Submit"!=null))
// validate your parameter
if parameter u capturing are valid then...
pageContext.setForwardURL(func, params ...............) // check devguide for details
if u want to access these parameter in second page . you can write this logic to processRequest of target page.
U can refer toolbox tutorial drilldown and createpage examples for implementation details.
Regards,
Ram

Email submit button issue

Hi Guys,
I have designed few forms recently and i am fairly new to livecyle, I have actually 2 issues, bit odd and i have tried to be as much discriptive as i can.
email submit button on all my forms works but it sends email to one perticular address and not to one that i programmed it to.
I.e. Form 1 - email to [email protected] - when i press submit button it will send email to [email protected]
Form 2 - email to [email protected] - when i press submit button it will send email to [email protected]
Form 3 - email to [email protected] - when submit button is pressed it sends email to [email protected]
Now when i use this button on actual form it sends email to right addresse but it is obviously in XML format and wouldnt work for us, when i use button on distributed copy of the form (created via distribute form button) it sends email to wrong addresse in PDF formate (which is the formate we like).
Also whatever i put in Email Subject box - it will always put "submitting completed form" in the email subject line.
Not sure if it makes any different but we use outlook and i have tried this from several pcs.
I think i have cheked and rechecked everything and can't fix it, any help would be great.
Process i use to create this button is - Insert >standard>email submit, i will then put desired email address and email subject in relevant fields under Object pellette.
Thanks,
H

There are two ways to set the adress in LiveCycle I know:
1st is with the button itself, second is with Javascript/Formcalc.
If I got you right and you have 3 different forms you could search for the [email protected] adress in the xml's and exchange it there or check out where the form gains the mail adress from. It's the easiest method to get rid of something you are not that sure where it is located in the form but know what it does ;D . (I had some similar problem since I overtook forms of someone else.)
Did you check this thread out? http://forums.adobe.com/thread/462681?tstart=0
Paul gave an example there how to deal with the various things on mail buttons.
Edit: PS: On which event did you script it? Normally you can't script on the mail button itself so you need a fake button like Paul said.
I'm also not good with Reader Extensions, since I can't experiment with those sry

Submit PDF form data to URL without submit button

Our client use LiveCycle Designer to design PDF forms. We've an ASP.Net Web form application, where they want us to embed the PDF form as part of our Data Entry Form. The Entry form has a Save button. And we want to save all the entry form entries (including the PDF form) in the Save button click.
The client PC will have adobe reader installed, so I guess we can embed the PDF form easily. I know PDF form can have Submit button and can submit data (XML) to a URL. But client does not want to place a separate Submit button in the PDF as the entry form has a "Save" button.
Do you have any suggestion? If I'm posting in wrong place or an already answered question I apologize earnestly and please guide me.

Check out the following:
http://www.nk-inc.com/software/fdftoolkit.net/examples/
You can download the open source edition for free:
http://fdftoolkit.codeplex.com
Or search for itextsharp on your favorite search engine
Note: If you are able to use Static XFA forms or Acrobat PDFs you are able to parse and merge the submissions. If you are saving "Save As" a dynamic XFA PDF in LiveCycle, then your options are limited.

Submit button in Compressor disabled after update Pro Applications Update 2010-02

Dear all,
I recently bought FCS and the whole software works fine after installation. However, I had to use Compressor over the last couple of days and the submit button was completely disabled and in the cluster field the option this computer had dissapeard. I checked this forum for a solution and found it. It seems that the problem was Qmaster. After reinstalling both Qmaster and Compressor everything works again. I have use the following set of instructions:
http://www.digitalrebellion.com/blog/posts/how_to_reinstall_compressor_and_qmast er.html
The problem is that now each time I do a software update, I am asked to install the Pro Applications Update 2010-02. After installing this update, the problem occurs again (the submit button is grayed/greyed out). It seems that in my computer the update creates a problem.
Does anyone have the same issue and if so, what suggestion you recommend?. At the moment I am avoiding the update, but I may me missing important bug and other fixes.
Thanks a lot,
Oliver

I have experimented a bit and got the problem sorted. Iuninstalled FCS using the uninstaller from http://www.digitalrebellion.com/fcsremover/.Before installing the whole suite again, I realised there was and additionalApple Qmaster package in the Applications folder. I deleted this file and emptythe trash. Then did a fresh installation of FCS, performed an update andinstalled Pro Applications Update 2010-02.
And now all is up and running workingperfectly.
Oliver

Submit Button always active

I have online fillable pdf forms. but it is quite irritating as I have a few forms that our customers fill in and they can submit multiple times and all it says at the top is form data sent. How can the submit button be deactivated when the forms is sent? it is good to restrict respondents from sending the same form twice Can adobe team explain to us how this can be avoided?
thanks
honory

It is solved! I did not have to enable those triggers after all.
It looks like it had something to do with a problem with the FND_GLOBAL package. Because in addition to the symptoms above, when using FNDCPASS to change the schema passwords, I was getting this error:
APP-FND-01564: ORACLE error 4068 in afpobinit
Then I researched and read the following notes and previous thread:
MOS 1070973.6 ERRORS SIGNING INTO ORACLE APPLICATIONS: APP-1564, ORA-6550, PLS-302
Error running SQL and EXEC commands in parallel
And I did the following fixes:
1. Run adadmin--> 4 -> 2 -> Recreate grants and synonyms
2. As the apps user, recreated the package FND_GLOBAL by running these scripts in this order:
cd $FND_TOP/patch/115/sql/
sqlplus apps/apps
@AFSCGBLS.pls
@AFSCGBLB.pls
ALTER PACKAGE FND_GLOBAL COMPILE BODY;
@AFSCCTXB.pls
@AFSCCTXS.pls
ALTER PACKAGE FND_GLOBAL COMPILE BODY;
3. Run adadmin--> 4 -> 2 -> Recreate grants and synonyms
4. Adadmin -> Recompile apps schema.
5. While this was probably not part of the fix, was doing this anyway as part
of the cloning steps:
Adadmin -> Generate Jar files (Force)
chmod 755 $COMMON_TOP/_pages
rm -rf $COMMON_TOP/_pages/*
$FND_TOP/patch/115/bin
ojspCompile.pl compile flush -p 20 –log /tmp/ojsp.log
6. Brought up the instances - and active users and active responsibilities works
again!
Thanks Hussein for jumping on this as usual! Marvin.
Edited by: MarvinHecht on Sep 2, 2012 11:44 PM

Cluster (sub menu) submit button grayed out

hello all
as of today my compressor has stopped allowing me to submit the batch i set up.
having sent an item from FCP to compressor, i get to set the options for settings and destination and then when i hit the submit button a second menu pops down regarding cluster options of which i have none. i add a name to this box yet no mater what other options i change the *submit button in this sub menu remains grayed out!*
http://twitpic.com/jj7n2
i have tried reinstalling compressor, and eventually the whole suit. i have removed the various prefs and qmaster stuff. i have used the fix compressor utility from digital rebel, repaired permissions and cleared out cache, but still *grayed out submit*.
what thoughts cloud genii?

I'm having the same problem.
This comes after suffering persistent crashing of Compressor 3.5 on launch and finally having to reinstall to at least fix the crashing problem. But now I can't submit any processes - the button is greyed out.
Can't remember setting this up originally, but it use to say "This Computer" for processing - do I need to add my computer to a list of available processors?
Any help hugely appreciated,
Simon

2nd 'Submit' button grayed out

Hi
Exported fine last night. Today when I click the Submit button and the window opens where I can name it, I do, but the submit button there is grayed out. Any idea what the problem is?
best
elmer

I am having this same issue, I have been using Compressor for the exact same thing for months. Suddenly I am unable to submit on the second submit button. It is greyed out and unclickable. I haven't changed settings it just randomly happened.. Compressor 4

I can't submit (button is gray)

Similar Messages

Maybe you are looking for