I can't update my MacBook Pro Late 2011 NSURLErrorDomain error - 1012.)( - 1012)

This is what I get whenever I try to update my OS X to 10.8.5
I have MacBook Pro 15" With OS X 10.7
I bought OS X 10.8 from day one and I was updating everything were normal
until today ?
what should I do ?
How to fix this ?

You might try this:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Then download and install: OS X Mountain Lion Update v10.8.5 (Combo).

Similar Messages

  • Can I update my macbook pro late 2011 to use bluetooth 4.0

    I got  a late 2011 Mac book pro currently running on Mac OS 10.9.5. I wish to update to Yosmite only if I have continuity and Handoff features are supported.
    Please do provide me with series of steps to update the Late Mac book pro to support the Handsoff and continuity in Yosmite.

    Is it a 21.5 or 27" ? Try to look at ifixit : https://fr.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2428+Bluetooth+Board+Replac ement/5948
    It seems the board doesn't match macbook pro's at all.
    Look at iMac 2012 : https://fr.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2544+AirPort-Bluetooth+Card +Replacement/16607.
    Look at what a member wrote :
    I successfully upgraded the Wi-Fi Bluetooth card in my late 2012 iMac to 802.11ac following this guide! The new card is now the same as what´s in the new 2013 iMacs, I used the 2013 iMac teardown to find the right part:)
    Runar Vaernes, fév 4
    So, 2012 can be upgraded to 2013 wifi ac/bluetooth but 2011 is a totally different story, my 2 cents ? forget about it, or hope i'm wrong.

  • Video issues after update - 15" Macbook Pro (Late 2011)

    I recently ran some updates for my mac and ever since then, I've been having video issues where my screen is showing horizontal lines. The lines come and go as I make changes to the screen (like minimizing a window) and they came in go and varying degrees of badness. Icons will also start missing unless I hover over them or make some other video change in that area of the screen.
    It could be a coincidence that it occurred after making the updates, but it is worth noting.
    OS: 10.7.4
    Model: 15" 2.2Ghz Intel Core i7, 4 GB, Late-2011
    Graphics: AMD Radeon HD 6750M 512MB
    Possibly related:
    https://discussions.apple.com/message/2652280#2652280#2652280
    Why is this happening?

    Users with the same issue:
    http://www.ifixit.com/Answers/View/23725/My+MacBook+Pro+17+freezes+and+lines+in+ screen!
    https://discussions.apple.com/thread/1609243?start=0&tstart=0
    https://discussions.apple.com/thread/2457853?start=0&tstart=0
    Anyone?

  • I just updated my MacBook Pro late 2011 15" to Mountain Lion. Whenever I open an app like VLC,Forklift,GoogleEarth,Photo Booth my color tone changes into a colder color. How can i disable this?

    Hello,
    Mountain Lion is great, but i have been facing some difficulties, first of all my apps were gone i had to reinstall all most all of them.
    That is not the big problem, the problem is that whenever i open apps like photobooth, lightroom,  or vlc my color tone changes. This is used to happen when I opened really intense apps eg mafiaII or like GTASA. Is there any way to disable this?

    try disabling it, take a took at these snaps from my phone. Might not be really clear but can give you an idea
    Hope this is clear,
    Thanks for the suppport
    Nazmul

  • I can't update my macbook pro from lion 10.7 to mavericks

    I can't update my macbook pro late 2011 from lion 10.7.5 to mavericks, what I do?

    Click here and install it manually.
    (113263)

  • Osx 10.8.4 does not run macbook pro late 2011

    does any have issues after installing osx 10.8.4???  because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is  to reinstall the osx 10.8.3. can anybody help me with this issue??  thank you.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT3053 Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?

    Can I run my MacBook Pro Late 2008 without battery forever? Is it bad in long term or anything? Does it make the system less stable?
    My battery got swollen (and I unfortunately noticed it very late and might have be running with it for months, which potentially explains all the crashes everyday and the trackpad not working anymore, the Apple test also says I have a bar of ram broken...) and I had to remove it because the back pannel did not close anymore... Can I still use my MBP normally forever that way? I was planning on buying a new mac anyway but maybe waiting for the next iMac upgrade in the year... Should I wait?

    Other than the system shutting down instantly if you have a power outage, whcih could corrupt the OS. Nothing else bad will happen.

  • I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
    It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
    ~Lyssa

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
    If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

  • Can't find the Airplay icon! I have a Macbook Pro Late 2011

    I have a MacBook Pro Late 2011. Yes I am sure that it is Late 2011 because I looked up the serial number and the website says it is indeed MacBook Pro Late 2011. I just bought an Apple TV and I want to use Airplay but I CANNOT find the Airplay icon on the upper right menu bar. I updated my software and everything but I still dont see it! What do I need to do inorder for me to use Airplay? PLEASE HELP!!!!!!!!

    What Mac do you have? It needs to be at least 2011
    OSX needs to be at least 10.8
    Has nothing to do with Internet, you need to check your local network and also make sure both ATV and Mac are on the same network. Airplay should also be enabled on ATV

  • HT4134 can I update my MacBook Pro which has Safari 5.1.10 to OS X?  If I can, how do I do it?

    Can I update my MacBook Pro (4yrs old) which has Safari 5.1.10 to OS X?  If yes, how do I do it?  I need to use iCloud but don't know how to load it.  I think it takes OS7 and I guess I still have 5.1.10.  All help is appreciated. Thanks

    It is not really clear just what you need to do to update:
    Go to the apple at the left side of the menu bar, About This Mac and what does it show for the Mac OS X version, under the Apple logo?
    Also, what else does it say about the processor and memory?

  • Can you reset macbook pro late 2011 to factory settings

    am trying to get back to square one to use setup assistant to transfer files from old macbook to new macbook pro late 2011 model,

    Hardware wise two resets can be done:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    If you want to wipe the hard drive contents and restore to a brand new Lion installation with nothing else,
    follow these directions: http://support.apple.com/kb/HT4848

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • Macbook pro (late 2011), Windows 8 (x64) High Defination Audio Code 10 error

    Hi guys,
    I have macbook pro late 2011. Currently installed Windows 8, updated and did setup of latest bootcamp but in any case Windows can not process with my sound card and shows error as CODE 10.
    I tried everything but couldnt solve. Please help.
    Many Thanks.

    I have the exact same problem... Everything else works great--just no audio. If anyone finds a solution, please share!!!
    Thanks!!!

Maybe you are looking for