I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX. BOX COMES UP AS FOLLOWS:-

I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX
A BOX COMES UP WITH THE FOLLOWING:-
firefox-exe - Entry Point Not Found The procedure Entry Point
could not be located in the dynamic link library mozsqlite-3-all.
PLUS
When I access the internet via my server (Tiscali now Talk-Talk)
I have to enlarge each page. this is not now automatic.
What on earth has happened?
Please Help.
Thank you.

You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Similar Messages

  • I cannot to the internet via mozilla firefox - why?

    I updated to the latest version of firefox and now I cannot connect to the internet. The circling motion icon goes backwards. My home page is Yahoo.

    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I cannot access the internet via wifi on my time capsule.

    I cannot access the internet via wifi on my time capsule even thought it was shown that I am connected to the time capsule with full wifi on my iMac. I use to be able access the internet via wifi on the TC. However, after playing around with the airport utility on my iPad I was no longer able to access the internet via the wifi on myTC. How can I fix this problem?

    Did your TC recently upgrade firmware to 7.6.3?
    I recommend you do a full factory reset.. and redo the setup.
    Use different names.. SMB type.. ie short, no spaces. pure alphanumeric for everything.
    Use only WPA2 Personal security.
    If that doesn't work, give more info.
    Age of the TC.. model number.. A1xxx from the base.
    Firmware revision.
    In the computer are you getting the correct IP and router and dns values? Please post a screen shot.

  • HT204406 Apple ID couldnt be created bacause of a server error, help!!!!  I cannot access the internet via Ipod

    After having to do a recovery with my Ipod I try to access the internet via the Ipod and the above mentioned Error is what I receive.

    So I found out with alittle research that instead of entering all that info on my ipod, security questions, birthday, ect that it was much easier to just go to http://appleid.apple.com and place all that info there and save it than try the process on my ipod and it finished the update.

  • When I open a second Profile while another is running the second cannot access the Internet until I close the first. Why?

    I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
    Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.

    I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
    If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
    Thanks.

  • Apple Applications cannot Access the Internet, Others can

    I've owned my MacBook for about 1.5 years now and it's starting to have some stability issues. Daily hard-locks are becoming the norm. I suspect hard drive issues may be to blame. I have repaired permissions and verified and repaired the disk. That seemed to help for a little while, but this latest problem is throwing me for a loop...
    Apple applications cannot access the Internet. Apple Mail (RSS, POP, ad IMAP), Safari, iTunes (PodCasts, iTunes Store), and Software Update all time out while trying to contact servers. Firefox, OpenVPN, command line SSH, ping, etc, all have no problems.
    My next step is a reformat, but this week is a really inconvenient time for me to do a backup and restore and I'd love a quick-fix if there is one. Any suggestions?

    Thanks. I just realized that is was serious user error. I forgot I had enabled Socks proxy in Internet connections a couple of days ago and that my Mac apps would still be using that while my other apps would not. Thanks!

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

  • I did a software update on my ipad and now cannot access the internet. how can i fix this?

    I did a software update on my ipad to 8.1 and now cannot access the internet.  How do I fix this?  My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

    Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

  • TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

    hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    Does the iPod see the network? Error message? Does the iPod connect to other networks?

  • I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

    I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8)  and Tme Capsule(7.5.2). Browser is Safari 5.1.
    When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
    It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
    Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
    Thanks.

    The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
    So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
    Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

  • I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

    I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
    Configure IPv4
    IPv4 Address
    Subnet Mask
    Router

  • HT1222 Since downloading the IOS7 I can't access the internet via a wifi.  I would like to remove it, is it possible?  I have the ipad2

    Since downloading the IOS7 I can't access the internet via a wifi.  I would like to remove it, is it possible?  I have the ipad2

    Sorry, no. Apple does not support downgrading.
    Have you tried to go into your settings, reset, reset network settings? It'll erase your current network from your iPad and let you start over.

  • Is there a way to access the web-based setup for my router if I cannot access the internet?

    Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

    On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
    Once you have reached the web configuration utility you can change the DHCP settings.
    To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

  • I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

    I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

    Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

  • Equium P200-1IR - Wireless is connected but cannot access the internet

    Hi ya,
    Need a little help!!
    I have just bought an Equium P200-1IR.
    I have turned the wi fi on.
    I can see my router which is Talk Talk.
    I can get the laptop to connect to the router and it says that I am connected,
    however I cannot access the internet.
    I tried the same process by inserting a wi fi dongle into the USB port
    on the laptop and exactly the same happens.
    We have other computers in the house that connect to the router and internet
    ok using the wireless dongle.
    I have plugged a hard wire connection from the laptop to the router and I can
    access the internet immediately with no problems, however would love
    to use the wireless feature.
    Any help really appreciated....Thanks
    Waynec

    Do you use the right channel and right encryption settings?
    This should be checked!
    It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
    But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
    How about WLan driver update? Did you update the WLan driver? If not do that!

Maybe you are looking for

  • HT5313 Second Display Problem after Update v10.7.5

    I just updated my MacBook Pro (Late 2011) and the new OS 10.7.5 is not recognizing my second display (VGA connected emachines 19''). I have restarted, changed the resolution, and tried many things, but the display that was working perfectly two hours

  • Generic Heterogeneous Services

    I’m trying to implement Heterogeneous Services using the generic ODBC driver supplied with Oracle 8.1.7. I am attempting to connect to a ForPro database running on a NT server from Solaris 5.7 running Oracle 8.1.7. Up to this point I have not been ab

  • Quicktime Error -150

    Hi, I have been using fcpx alot lately exporting videoes for youtube in 720p. But now suddenly i get Quicktime Error -150 whenever i try to export either "Export with compressor settings" or "Send to compressor". If I use "Send to compressor" It open

  • TS2380 It's says I have error code (13014) but I cant open iTunes or get on the internet

    It's says I have error code (13014) but I cant open iTunes or get on the internet

  • Crash on iPad 3 & 4 + ios7 with AIR 4

    I've tested my app (AIR w/GPU render mode) succesfully on iPad mini 2 and a Nexus 7 2012, but since I have released a 2nd version to the app store, I had reports of crash after assets are rendered to bitmaps (my app display a "rendering assets x/5" o