I cannot call anyone after upgradiong my phone to iOs 7

After i upgraded my iphone5 to iOs 7.0.2 i cant no longer call anyone in my contact list please help me, i have to make an important calls

I have this issue to - my current work around is use the speaker phone, but this is a HUGE problem for privacy for me.

Similar Messages

  • Hey guys i cannot call anyone on skype at all!

    Hey guys ive tried everything ive looked on forums all over and i cannot call anyone on skype at all it fails everysingle time ive tried everything and still nothing works ive tried uninstalling and deleting the file skype in %appdata% and still nothing ive disabled upnp and even tried going into the skype xml and disabling it and nothing i do not know what else to do...... i cannot call anyone on skype ive even updated to the latest version and it doesnt work on my phone either soo.... i need some help guys it would be very much appreciated thanks!

    In that case, I would start everything from fresh:
    1. Doing complete uninstall and then reinstall.
    2. Open a new skype account.
    3. Try making a test call to echo123.

  • Strict servlet API: cannot call getOutputStream() after getWriter()

    i have an applet which will communicate with a servet ,  but got following error in the servlet
    java.lang.IllegalStateException: strict servlet API: cannot call getOutputStream() after getWriter()
    at weblogic.servlet.internal.ServletResponseImpl.getOutputStream(ServletResponseImpl.java:280)
    at oracle.osl.lt.web.servlets.AudioServlet._processGetPlayList(AudioServlet.java:235)
    at oracle.osl.lt.web.servlets.AudioServlet.doPost(AudioServlet.java:91)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = p1dvosl02 TXID = CONTEXTID = TIMESTAMP = 1318836952580
    WatchAlarmType: AutomaticReset
    WatchAlarmResetPeriod: 30000
    >
    *below _processGetPlayList() is called by doPost() of the servlet.*
    seems the exception is thrown due to response.getOutputStream()?
    any idea? thanks!!
    private void _processGetPlayList(HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException, IOException {
    try {
    ObjectOutputStream objectOut =
    new ObjectOutputStream(new BufferedOutputStream(response.getOutputStream()));
    try {
    RichDataDTOExt richData = _getRichData(request);
    if (richData == null) {
    Log.web().debug(s7);
    throw new ServletException(s7);
    objectOut.writeObject(richData.getAudioRecordings().getAll(new ContentRefDTO[0]));
    finally {
    objectOut.close();
    catch (IOException e) {
    Log.web().error(e.getMessage());
    throw new ServletException();
    }

    thanks for you reply. but seems we don't call getWriter() at all in our code.
    actually this error only happen in our customer's env, no this issue in our development env.
    besides using getOutputStream() and getWriter() simultaneously for same response, is this maybe related with some web server configuration?

  • I have Photoshop CS purchased many years ago for a LOT of money.  Other day went to use it, got msg. "computer configuration changed, need to re-activate".  Tried that for days, didn't work.  Cannot call ANYONE to find out problem.  Am not very computer l

    I have Photoshop CS, purchased many years ago for a LOT of money.  Other day went to use it, got msg. "computer configuration changed, need to re-activate.  Tried that for days, didn't work.  Cannot call ANYONE to find out problem.  Am not very computer literate, so don't understand what that means.  LOVE the CS program and know how to use it, so don't want to have to learn something new.  Don't know what to do.  Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS.  CAN SOMEONE PLEASE HELP!!!     

    jd49034389 wrote:
    down further there is a Photoshop CS2, do I just do that one?
    Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
    Good luck.
    --OB

  • Strict servlet API: cannot call getWriter() after getOutputStream()

    Hi,
    Am getting below exception when i click on create report button.
    It was successfully running in development machine, when we deploy the same application into the testing server.
    what could be problem..
    am using JSF 2.0, Primefaces 3.5, Jdeveloper and Weblogic 12 C server..
    java.lang.IllegalStateException: strict servlet API: cannot call getWriter() after getOutputStream()
      at weblogic.servlet.internal.ServletResponseImpl.getWriter(ServletResponseImpl.java:299)
      at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:362)
      at org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
      at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:155)

    Issue resolved, because testing machine doesn't have specified font in font directory.
    recompiled the jrxml file with arial font its working both the env machine..

  • After updating my phone to iOS 7.0.2 it won't let me onto iTunes!

    After updating my phone to iOS 7.0.2 it won't let me on my iTunes! I've logged out and back in, turned it off. Nothing works

    Hey,
    I assume you already plugged it into iTunes and tried to restore it? When it is in Recovery mode, the only thing you can do is restore it. You want to make sure that you back the iPad up on a regular basis.

  • Latest upgrade (2 Jul 15) crashed Skype and I cannot call anyone

    I got a prompt today that an update was available.  I clicked on Upgrade, and got the usual message that "Please wait while Skype improves your experience..." or something like that.  Then that message disappeared, and it just says Skype Home Unavailable.  The symbol is the one that I usually see when there is not a network connection (little swirl in a circle).  But I have no network problems.  This is really bad -- you are in the middle of your workday, you think you are clicking on a quick update, and instead you are cut off from the world.  So I come on this site and try to get a tech support person on chat, but the message is "Sorry, we're having problems at the moment, please try later or join the community...".    Any solutions for me?   I generally am really pleased with Skype, but not today!

    There are hundreds of AntiVirus vendors out there.  If one of the vendors decides to block an application for whatever reason there is not much that can be done.  The fault really lies in the AntiVirus software, it's virus definitions and it's configuration.    Here's one example of why it can fail. Let's say that Norton defaults to blocking all applications on your system so an exclusion has to be made for every program including Skype.  You have an exculsion for Skype and it works fine.  The exclusion for Skype saves the details for the executable including its checksum.  Later when you chose to upgrade the executable, Skype doesn't launch or gain Internet access.  Why is that?  Because the new version of Skype does not match the executable you allowed in the exception list.  It is seen as a brand new program and must be readded to the exclusion list.  The old exclusion only works on that exact previous version of Skype. How this all works or doesn't work is handled by the AntiVirus software so nothing in Skype itself could be done to avoid that problem unless it was explicitly designed to interact with every AntiVirus software out there which would be beyond the scope of the program.

  • TS1702 i have purchaced many apps from the app store, and now after updating my phone to iOS 6, the apps sitting in my library in iTunes wont transfer to my phone anymore? Says that the apps can not be found. The appstore says i have no bought apps either

    I have previously bout about 30-40 apps from the app store. After a recent update to the newest version of iOS (and a reset back to factory standards), i find that i cant put any of the apps from my iTunes library, back onto my phone!? When i try, it says that the apps location cant be found!?  I tried going into the app store and in the app section going into 'Purchaces', in the hope that i could just re-install them from there (because i have already paid for them), but in there, it tells me that there are NO apps in my purchaces list!?  This is quite concerning because i have spent quite a bit of money on these apps, that now seem to be un-usable?!   Ican still put all my music on my phone through iTunes liuke normal, but Podcasts are doing the same thing as the apps?! Can someone please help me, or suggest what to do because im really getting frustrated.  I really like my iPhone, but if this is what is going to keep happening, i think ill change to an Android phone. . . . .

    Thanks too all the people who responded. . . . (noone)
    Got it sorted though. Seems that Apple has issues with multiple apple id's.
    Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
    Even after that it was extremely hard to get my apps back on my PC.
    If anyone else has the same problem. . . .email Apple. Cya.

  • HT203977 After Update my phone from IOS 7 to 8 . m phone become really bad losing signal all the time now i did update to 8.1 and still losing signal appearing  gprs  on display at place of 4 g or 3 g  and the needs turn to Airplane mode and come back to

    After update my Iphone 4 s to ios 8.1 this device keep losing signal from 3 G  and  wifi , to fix that is necessary to me  turn on and off airplane mode  ,
    How can i fix  this mess from Apple ios 8.1  ??? I do not have this problem before  when was ios 7

    hello...
    I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
    I did the steps you have taken but it is still not working... any updates on your end?

  • After updating my phone to IOS 7.0.6 (through my iPhone), my phone doesn't work. Please help...

    I just updated my iPhone to IOS 7.0.6 but it does it work. I pressed the power button several times, but it does not work. What do I do to make my phone work?

    Settings > Privacy > Photos > Google > Switch ON

  • Wifi problem after updating my phone to ios 7.1.1

    Hello everyone ,
    I seems to be having wifi problem on my Iphone 5s. Before I updated my iphone to IOS 7.1, the wireless works just fine and without any disconnection. But now since i updated my phone to 7.1, my phones keep getting disconnected or hardly could connect into it. Sometimes when i go into the wifi setting, it detect the wireless but it says "Unable to join the network". However I'm using the same wireless connection on my laptop in the same location where i stand and my laptop wifi connection work just fine and smooth. What could be the problem? I need a solution.
    I've Tried to put it on Airplane mode and reset network settings but still unable to solve it out. Secondly i also tried to reset all setting and hold both home and power button. Nothing is solving this. I need a solution, help please society :')

    I am having the same problem since updating to 7.1.1.  I also would appreciate any help.
    I have tried the airplane mode and reset network settings with no luck. 
    Thanks in advance for any solutions provided.

  • Forgot my security questions, but I cant call anyone. Help me!

    So I made the security questions a few years ago, and I just downloaded the app for my PC a few hours ago. I cannot call anyone because I broke my phone, and I have no home phone. I can't seem to find my Rescue E-Mail, because I'm pretty sure I never even made one. Even if I did, I don't know it so that's ANOTHER problem. I just want to buy some songs. Won't work on my iPod, so my laptop is my last resort. PLEASE HELP ME!!!

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'. Please be patient waiting for the return
              phone call. It will come in time depending on how heavily the servers are being hit.
         2.  Call Apple Support in your country: Customer Service: Contacting Apple for support or
              Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
              Account Security.
         3.  Rescue email address and how to reset Apple ID security questions.
    How to Manage your Apple ID: Manage My Apple ID

  • IllegalStateException: strict servlet API: cannot call getWriter()

    I am getting an exception in Weblogic when I am trying to display a pdf file in a web page.
    java.lang.IllegalStateException: strict servlet API: cannot call getWriter() after getOutputStream()
    I am using the following code code
    ByteArrayOutputStream baos;
    ServletOutputStream out = response.getOutputStream();
    baos.writeTo(out);
    I have seen this error in so many discussion forum and there is no proper solution for this error.
    I am able to see the pdf page even with this exception. But I want to get rid of this exception also from Weblogic.

    I just did a quick (and dirty!) test with the following to display a jpg image and it worked for me without any trace of an exception:
        @Override
        protected void doGet(HttpServletRequest request, HttpServletResponse response)  throws ServletException, IOException {
            response.setContentType("image/jpg");
            File f = new File("/Users/me/Desktop/IMG_0032.JPG");
            byte[] bits = new byte[(int) f.length()];
            FileInputStream fos = new FileInputStream(f);
            fos.read(bits);
            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            baos.write(bits, 0, bits.length);
            baos.writeTo(response.getOutputStream());
            baos.close();
            fos.close();
        }Note that there is no call anywhere to response.getWriter() in that.
    I'd guess the exception is directing you at what the problem is, at least as the server is seeing it -- somewhere in the execution of the request path there would appear to be call to response.getWriter() occurring after a call to response.getOutputStream() has been called, which is not permitted on WLS according to the error message.
    Do you use filters on this app? If response.getWriter() has been called on the same response object in a post request filter phase, that would be on the same call path with the same response object and would result in the exception.
    -steve-

  • I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive messages. What should I do?

    I dropped my iphone 5,1 week later suddenly my phone was restarted. After that I cannot call or receive any messages. I followed all the steps that was sudgested but it is still not working. It cannot recognize my Sim card and when Sim card is in it, IMEI number doesn't shown in settings. I don't understand how it is not possible to repair it when I dropped from 1 meters and even I didn't broke the screen. So, what should I do dear Apple family?

    Hello dilara8,
    Welcome to the Apple Support Communities!
    I understand that you are seeing multiple issues with your iPhone after a drop. It sounds as though your device may need to be evaluated for service. For more information on this process, please refer to the attached link. 
    iPhone Repair and Service - Apple Support
    Best,
    Joe

  • Whenever somebody calls me on ichat the green light appears but i cannot see anyone, whenever somebody calls me on ichat the green light appears but i cannot see anyone

    whenever somebody calls me on ichat the green light appears but i cannot see anyone, whenever somebody calls me on ichat the green light appears but i cannot see anyone

    Hi,
    Are you seeing an Invite Window ?
    Video Invites are normally top centre of your screen and will appear to "float" over any other app you you using.
    Audio Only invites are  top and right of the screen.
    10:13 PM      Monday; February 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for