I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!
Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!
If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.
Similar Messages
-
trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available?? and if so, where is it located???
No such option on an iPhone. Just go to Settings>wifi, tap the name (SSID) of your your home network from the list, then when prompted, enter the password.
-
I have two apple ID, and I can't switch between them, although I change to my old ID, and it remains in the new ID, and I can't update to old purchases I did with the old id.
I already did according to your suggestion (sign in and sign out) and the id remain on the new one.
Is there something more affective? -
When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?
Also, I apparently have to replace my battery. Could the problem have any relevance to a dead battery?Have you held the power button down for 10+ seconds? That should turn it off.
Ciao. -
Hi i been try to minimise few app like safari,Ical etc etc from the fullscreen view but didn't manage to find any solution!! With the command M shortcuts didn't work...any help???
To make a screen full screen, you click on the arrows in the upper right corner. To minimize, move your cursor all the way to the upper right corner of your desktop--give it a second--a symbol will appear that lets you "reverse" the action and minimize the window. Hope I'm explaining this correctly.
-
New 4s connected to my Lexus bluetooth. Having intermittent problem with calls. I can hear them, but they can't hear me. Never a problem with 3gs phone. Anyone else having this problem?
I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month. -
I am the administrator on our family computer with 3 other family member logins. I have downloaded the app for pages but how can I allow the other users access to it? I am a computer novice so i need some advice.
If Pages and the other applicatioins installed in the Applications in the root directory they can be used by everyone. By default all programs installed by the App store are installed in the Applications folder in the root. In other words, your family members should be able to use the programs. Can they not?
-
DAP Premium seems not to be compatible with the new version
Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
As XP is faded out, there will be an awful lot of people like me complaining.
But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
If you have any hints for how to translate these old settings...I would kiss your feet!
Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
I do hate change!
Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
Julia -
iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.
You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.
-
can anyone help when i try to connect my iphone4 to sync with imac g5 i get a message stating my iphone cannot be used as it requires itunes version 10.6.3 or later when ive tried to download this on my imac it says it does not support it.
All i want to do is sync my iphone 4 with my imac g5 can anyone helpClick here and download the software. Unless otherwise noted, a device running iOS 6 requires at least Mac OS X 10.5.8 and iTunes 10.6.3 to be synced from a Mac.
(78390) -
Thunderbird starting asking for my password. I know the password, just have not been asked for years.
After typing in password keep getting message
'Sending of password did not succeed. Mail server mail.intergate.com responded: dmanns logon failed '
however, I went to Webmail.intergate.com; was redirected to http://email.1dial.com/webmail/Login.aspx.
Can get email from webmail just fine (same password), just not via Thunderbird.
Have already run two anti-virus scans. Have deleted the saved passwords and re-entered them as the program asked for them and renamed key.db & signons.sqlite (Read this in a forum on the web) and they rebuilt themselves. Still can not get email via Thunderbird.Did you contact your email provider? They may have server issues.
-
Both my iTunes and iPhone/iPad are using the most current software. I've tried deauthorizing and deauthorizing my computer, but nothing helps.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues.
Hope this helps. -
Infos:
IPhone 4, 32 GB
IOS 7.1.2
Problem:
Videos, memos and other sound microphone using applications work without any problem. It just appears when calling or being called. Sometimes it starts during the call.
Situation:
I sent my damaged IPhone 4 to apple for reparation. I bought it for 180 € + 20 € for my retailer.
Some calls later this problem started (only at the new or repaired IPhone). My 3 month warranty is almost over (4 weeks left)
Steps to solve the problem:
- rebootet the IPhone several times
- made a backup (iCloud and ITunes) and recovered it again
- I set back all settings to standard.
--> Nothing changed
Then I went to my retailer, who sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Started at the second call I received. Now the warranty time is going to run out in 4 weeks.
Open Questions:
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. Do they want to cheat me, so my warranty runs out? Thanks for any helpI have the same problem.
IPhone 4
IOS 7.1.2
My retailer sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Now the warranty time is going to run out in 4 weeks.
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. -
My IMAC has a 10.6 operating system and I am trying to learn how to use the cloud to store pictures and upload files etc from my iphone. Do I need to upgrade my operating system and how do I do that?
You need to upgrade = purchase Lion in order to use iCloud on your iMac. I use Dropbox with Snow Leopard. No need to upgrade.
-
Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.
Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.
Maybe you are looking for
-
I am trying to use system center to manage my Azure enviorment
I am freaking lost!!!! I have a Widows Azure environment that i'm trying to manage using system center ( apparently this is the bee's knees cause every post is about it) So I attempt to install Microsoft System Center and I got something now on a 201
-
XML data output in a custom grid table
Hi! I was wondering if it is possible to display xml data output in a custom-made grid table? Important is the ability to arrange the fields on the grid layout (not a fixed layout with columns and rows). I am using the latest JDeveloper release. Than
-
How to disply the selected row in dataTabe in JSF
Hello Team, I have one datatable.& in that table i have one coloumn (checkBox are present in that coloumn).when i first go on that page i select some particular row.& submit the page.but when i again revisit that page i show some selected & not selec
-
Blank page generated from export to pdf but not when sent to viewer
I have a report where I am suppressing a subreport when no data is found and it works correctly when sending it directly to the CrystalReportViewer. However if I Export it directly to a pdf it is creating a blank page. Can someone please tell me ho
-
Can't find my iweb domain file when searching for it in iweb seo tool
I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is i